Equivalent & Substitute Parts for 460-210 LED Mounting Pad

Part Overview

The 460-210 is a T1/T1 3/4 LED standoff mounting pad manufactured by Bivar Inc. This component is designed to provide mechanical support and positioning for LED leads during assembly and installation. The part is constructed from natural nylon material and maintains an active product status with full RoHS3 compliance. Alternative equivalent parts may be required due to inventory availability, lead time considerations, or specific application dimensional requirements within the allowable parameter range.

Substiute Parts

460-210

Bivar Inc.In Stock: 1116460-210 Datasheet

Current PartRFQ

460-200

Bivar Inc.In Stock: 2991460-200 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The 460-200 is classified as a parametric equivalent to the 460-210 based on the following substitution criteria:

Matching Parameters:

• LED Type: Both support T1 and T1 3/4 LED packages
• Material: Both constructed from natural nylon
• Color: Both natural finish
• Manufacturer: Both produced by Bivar Inc. within the same 460 series
• RoHS Status: Both ROHS3 compliant
• MSL Rating: Both MSL 1 (Unlimited)

Dimensional Variance:

• 460-210: 0.210" (5.33mm) length
• 460-200: 0.200" (5.08mm) length
• Difference: 0.010" (0.25mm)

The length difference of 0.010 inches represents a 4.8% reduction in standoff height. This variance falls within acceptable mechanical tolerance for LED mounting pad applications where the primary function is lead support and positioning within the T1/T1 3/4 package envelope.

Parameter Comparison

Engineering Selection Recommendations

460-210 Selection Criteria:

• Primary choice when maximum standoff height of 0.210" (5.33mm) is specified in assembly documentation
• Preferred for applications requiring precise LED positioning at the upper tolerance limit
• Active product status with 1089 units in stock

460-200 Selection Criteria:

• Acceptable substitute when standoff height tolerance permits 0.200" (5.08mm) dimension
• Suitable for applications where the 0.010" height reduction does not impact circuit board clearance or LED optical alignment
• Active product status with higher inventory availability (2900 units in stock)
• Both parts maintain identical RoHS3 compliance and MSL 1 ratings, ensuring equivalent environmental and regulatory performance

Compliance Equivalence: Both parts carry ROHS3 compliance certification and MSL 1 (Unlimited) moisture sensitivity rating, confirming equivalent handling, storage, and environmental performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can 460-200 be used as a direct replacement for 460-210?

A: The 460-200 is a parametric equivalent with a 0.010" (0.25mm) shorter standoff height. Direct substitution is permissible only when assembly documentation allows for this dimensional variance or when the application tolerance accommodates the reduced height. Verify that the 0.200" dimension does not conflict with circuit board layout or LED lead positioning requirements.

Q: What is the primary difference between these two parts?

A: The sole functional difference is the standoff length. The 460-210 provides 0.210" height while the 460-200 provides 0.200" height. All other parameters including material, LED compatibility, color, compliance certifications, and moisture sensitivity are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both 460-210 and 460-200 are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, confirming equivalent environmental and regulatory performance.

Q: Which part should I select if inventory is a concern?

A: The 460-200 maintains higher inventory availability (2900 units) compared to the 460-210 (1089 units). If the dimensional tolerance permits the 0.010" height reduction, the 460-200 offers improved lead time and stock availability while maintaining full functional and compliance equivalence.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts carry identical MSL 1 (Unlimited) ratings, indicating no special moisture control or storage requirements. Handling and storage procedures are equivalent.

Q: What LED package types are supported?

A: Both parts support T1 and T1 3/4 LED packages. No other LED package types are compatible with either part.