TE Connectivity Erni 454530 ZDPLUS F 3-10 30POS Backplane Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity Erni 454530 is a 90-position backplane connector receptacle with female sockets, designed for through-hole, right-angle mounting applications. This connector features a 0.098" (2.50mm) pitch configuration with 9 rows and 10 columns, supporting 60 signal and 30 ground contacts. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and system integration requirements. Substitute parts must maintain electrical and mechanical compatibility while meeting current manufacturing and compliance standards.

Substiute Parts

454530

TE Connectivity ErniIn Stock: 1085454530 Datasheet

Current PartRFQ

2065883-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 22202065883-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity Erni 454530 is based on the following critical parameters that must align between the main part and substitute alternatives:

Primary Compatibility Criteria:

• Connector type classification: Receptacle with female sockets
• Position count: 90 positions
• Contact pitch: 0.098" (2.50mm)
• Mounting configuration: Through-hole, right-angle orientation
• Termination method: Press-fit contact technology
• Contact layout distribution: 60 signal and 30 ground contacts
• Compliance certifications: ROHS3 compliance and REACH unaffected status

The substitute part TE Connectivity Aerospace, Defense and Marine 2065883-1 satisfies all primary compatibility criteria. While this substitute introduces additional features (high-speed capability, shielding, and specified electrical ratings), these enhancements do not preclude substitution in applications originally designed for the 454530. The substitute maintains identical pitch, position count, contact layout, and press-fit termination methodology.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity Aerospace, Defense and Marine 2065883-1 is the manufacturer-recommended substitute for the obsolete TE Connectivity Erni 454530. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment across procurement cycles.

The substitute part is classified as active product status, providing assured long-term availability and supply chain continuity. The 2065883-1 maintains identical electrical contact configuration (60 signal, 30 ground), pitch spacing (0.098"), and press-fit termination methodology, enabling direct functional replacement in existing designs.

The substitute introduces board edge mounting capability in addition to through-hole configuration, providing enhanced design flexibility. Additional specifications provided for the substitute (0.600A current rating, -65°C to 105°C operating temperature range, 250V voltage rating, and UL94 V-0 flammability rating) establish defined performance boundaries for applications where the main part specifications were not documented.

Frequently Asked Questions (FAQ)

Q: Can the 2065883-1 substitute directly replace the 454530 in existing PCB designs?

A: The 2065883-1 maintains identical pitch (0.098"), position count (90), contact layout (60 signal, 30 ground), and press-fit termination. Both parts support through-hole, right-angle mounting. Direct substitution is supported for applications where the original design accommodates the substitute's board edge mounting capability or standard through-hole configuration.

Q: What is the difference in row configuration between these parts?

A: The 454530 features 9 rows by 10 columns, while the 2065883-1 features 6 rows by 10 columns. Both configurations deliver 90 total positions with identical pitch and contact layout distribution. The row configuration difference reflects different physical form factors while maintaining electrical compatibility.

Q: Are both parts compliant with current regulatory requirements?

A: Both the 454530 and 2065883-1 are ROHS3 compliant and REACH unaffected. The substitute part provides documented compliance certifications including UL94 V-0 material flammability rating, establishing defined safety parameters for applications requiring specified material properties.

Q: What packaging differences exist between these parts?

A: The 454530 is supplied in tray packaging, while the 2065883-1 is supplied in tube packaging. Packaging selection should align with assembly process requirements and inventory management protocols.

Q: Does the substitute part provide additional electrical specifications?

A: The 2065883-1 provides specified current rating (0.600A), operating temperature range (-65°C to 105°C), and voltage rating (250V). These specifications establish defined performance boundaries for the substitute part. Applications requiring specific electrical performance parameters should reference these documented values.

Q: Is the substitute part classified as high-speed?

A: The 2065883-1 is designated as high-speed connector technology within the Z-PACK HM-Zd series and includes shielding features. Applications not requiring high-speed performance characteristics will operate within the substitute part's performance envelope.