SCHURTER 4400.0415 Circuit Breaker Thermal 200mA 240VAC 48VDC Equivalent & Substitute Parts

Part Overview

The SCHURTER 4400.0415 is a single-pole thermal circuit breaker rated for 200mA at 240V AC and 48V DC, designed for panel mount applications with push-to-reset actuation. This component is classified as Active product status and complies with international safety standards including CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, and UL1077. Substitute parts are identified when electrical specifications, mechanical mounting characteristics, and regulatory approvals remain identical across the T11 series.

Substiute Parts

4400.0415

SCHURTER Inc.In Stock: 8454400.0415 Datasheet

Current PartRFQ

4400.0039

SCHURTER Inc.In Stock: 10784400.0039 Datasheet

Parametric EquivalentRFQ

4400.0148

SCHURTER Inc.In Stock: 9804400.0148 Datasheet

Parametric EquivalentRFQ

4400.0382

SCHURTER Inc.In Stock: 9384400.0382 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCHURTER 4400.0415 are determined by strict equivalence across the following critical parameters:

• Current Rating: 200mA (exact match required)
• Voltage Rating AC: 240V (exact match required)
• Voltage Rating DC: 48V (exact match required)
• Breaker Type: Thermal (exact match required)
• Mounting Type: Panel Mount (exact match required)
• Actuator Type: Push to Reset (exact match required)
• Number of Poles: 1 (exact match required)
• Series: T11 (exact match required)
• Approval Agencies: CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, UL1077 (exact match required)
• RoHS and REACH Compliance: ROHS3 Compliant, REACH Unaffected (exact match required)

All identified substitute parts meet these criteria without exception.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts—4400.0039, 4400.0148, and 4400.0382—are functionally equivalent to the primary part 4400.0415 based on electrical and mechanical specifications. Each part carries Active product status and maintains identical compliance certifications across CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, and UL1077 standards. All parts are ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Selection among these equivalent parts may be based on inventory availability and packaging considerations, as all electrical and mechanical parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 4400.0039, 4400.0148, and 4400.0382 be used interchangeably with 4400.0415?

A: Yes. All three parts are parametric equivalents with identical current ratings (200mA), voltage ratings (240V AC, 48V DC), breaker type (thermal), mounting configuration (panel mount), actuation method (push to reset), and regulatory approvals. They are direct substitutes.

Q: Are there differences in compliance certifications between these parts?

A: No. All parts carry identical approvals: CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, and UL1077. RoHS and REACH compliance status is identical across all parts.

Q: What factors should determine which substitute part to select?

A: Since electrical and mechanical specifications are identical, selection should be based on inventory availability and packaging requirements. All parts are supplied in bulk packaging.

Q: Is there any difference in product status between the main part and substitutes?

A: No. The main part 4400.0415 and all substitute parts (4400.0039, 4400.0148, 4400.0382) maintain Active product status.

Q: Can these parts be mixed in the same application or assembly?

A: Yes. Since all electrical ratings, mechanical mounting characteristics, and regulatory approvals are identical, these parts are fully interchangeable within the same circuit protection application.