SCHURTER 4400.0037 Thermal Circuit Breaker Equivalent & Substitute Parts

Part Overview

The SCHURTER 4400.0037 is a single-pole thermal circuit breaker rated for 2A at 240V AC / 48V DC with push-to-reset actuation and panel mount configuration. This component is classified as Active product status and complies with CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, and UL1077 standards. Substitute parts are identified when identical electrical specifications, mechanical mounting requirements, and regulatory certifications are maintained across the T11 series.

Substiute Parts

4400.0037

SCHURTER Inc.In Stock: 11004400.0037 Datasheet

Current PartRFQ

4400.0002

SCHURTER Inc.In Stock: 12724400.0002 Datasheet

Parametric EquivalentRFQ

4400.0035

SCHURTER Inc.In Stock: 11254400.0035 Datasheet

Parametric EquivalentRFQ

4400.0047

SCHURTER Inc.In Stock: 11904400.0047 Datasheet

Parametric EquivalentRFQ

4400.0189

SCHURTER Inc.In Stock: 10614400.0189 Datasheet

Parametric EquivalentRFQ

4400.0193

SCHURTER Inc.In Stock: 10424400.0193 Datasheet

Parametric EquivalentRFQ

4400.0711

SCHURTER Inc.In Stock: 9354400.0711 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

All substitute parts listed maintain identical electrical and mechanical parameters as the primary part 4400.0037. Substitution eligibility is determined by the following criteria:

• Current Rating: 2A (exact match required)
• Voltage Rating: 240V AC and 48V DC (exact match required)
• Breaker Type: Thermal (exact match required)
• Actuator Type: Push to Reset (exact match required)
• Mounting Type: Panel Mount (exact match required)
• Number of Poles: 1 (exact match required)
• Series: T11 (exact match required)
• Regulatory Compliance: CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, UL1077 (exact match required)
• RoHS and REACH Status: ROHS3 Compliant, REACH Unaffected (exact match required)

All substitute parts meet these criteria and are therefore electrically and mechanically interchangeable with 4400.0037.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are Active product status components manufactured by SCHURTER Inc. within the T11 series. Each part carries identical regulatory certifications: CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, and UL1077. All parts are ROHS3 Compliant and REACH Unaffected. Selection among these interchangeable parts may be based on inventory availability and procurement lead times. No technical differentiation exists between these parts based on the provided specifications.

Frequently Asked Questions (FAQ)

Q: Can 4400.0002, 4400.0035, 4400.0047, 4400.0189, 4400.0193, and 4400.0711 be used interchangeably with 4400.0037?

A: Yes. All substitute parts maintain identical electrical ratings (2A, 240V AC, 48V DC), mechanical configuration (panel mount, single-pole, push-to-reset thermal breaker), and regulatory compliance certifications. Direct substitution is supported.

Q: Are there any differences in packaging or mounting between these parts?

A: No. All parts are supplied in bulk packaging and feature identical panel mount configurations. Mechanical and electrical interfaces are identical.

Q: Do all substitute parts meet the same regulatory standards?

A: Yes. All parts comply with CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, and UL1077. RoHS3 compliance and REACH Unaffected status are consistent across all parts.

Q: What should determine my choice between these substitute parts?

A: Selection should be based on inventory availability and procurement requirements. All parts are functionally and mechanically equivalent. Current inventory levels are provided in the parameter comparison table.