SCHURTER 4304.6044 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4304.6044 is an IEC 320-C6 power entry connector receptacle module designed for panel-mount applications with snap-in installation. This component functions as a male-pin receptacle for AC power inlet connections rated at 2.5A, 250VAC with integrated on-off switch functionality. The product is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for new designs and legacy system support.

Substiute Parts

4304.6044

SCHURTER Inc.In Stock: 6814304.6044 Datasheet

Current PartRFQ

CMF3.1032.12

SCHURTER Inc.In Stock: 915CMF3.1032.12 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4304.6044 is determined by strict equivalence across the following critical parameters:

• Electrical Compatibility: Identical connector style (IEC 320-C6), connector type (Receptacle, Male Pins - Module), current rating (2.5A), and voltage rating (250VAC)
• Functional Equivalence: Presence of on-off switch functionality and three-position configuration
• Mechanical Compatibility: Panel mount, snap-in installation method with compatible panel thickness tolerance
• Regulatory Compliance: UL94 V-0 flammability rating and RoHS3 compliance

The substitute part CMF3.1032.12 meets all electrical and functional requirements. Mechanical differences in panel thickness accommodation and termination method represent design variations within the same functional category rather than substitution barriers.

Parameter Comparison

Engineering Selection Recommendations

The CMF3.1032.12 is the direct active equivalent for the obsolete SCHURTER 4304.6044. Both components share identical electrical ratings, connector configuration, and core functional specifications. The substitute part carries active product status with current manufacturing support, ensuring long-term availability and supply chain reliability.

Selection of CMF3.1032.12 is supported by:

• Matching electrical specifications (2.5A, 250VAC, IEC 320-C6 configuration)
• Equivalent safety certifications (UL94 V-0, RoHS3 compliance)
• Enhanced ingress protection rating (IP40 versus IP20), providing improved environmental sealing
• Broader approval agency recognition (CCC, cULus, VDE versus cCSAus, VDE)
• Active manufacturing status with documented inventory availability

Panel thickness accommodation differs between the two parts (1.00mm versus 2.00mm). Design integration requires verification that the target application panel thickness falls within the CMF3.1032.12 specification range.

Frequently Asked Questions (FAQ)

Q: Can CMF3.1032.12 directly replace 4304.6044 in existing designs?

A: Yes, for applications where the panel thickness is 2.00mm or less. The electrical and functional specifications are identical. Panel cutout dimensions and mounting method are compatible. Termination method differs (solder eyelet versus solder), requiring PCB layout adjustment.

Q: What is the significance of the IP40 rating on CMF3.1032.12 versus IP20 on 4304.6044?

A: IP40 provides enhanced protection against solid object ingress (particles larger than 1mm) compared to IP20 (particles larger than 12mm). This represents an improvement in environmental sealing capability and does not restrict substitution.

Q: Are there panel thickness limitations when substituting?

A: Yes. The 4304.6044 accommodates 1.00mm panel thickness, while CMF3.1032.12 accommodates 2.00mm panel thickness. Verify that your application panel thickness does not exceed 2.00mm for proper snap-in engagement.

Q: Do the different termination methods affect electrical performance?

A: No. Both solder eyelet and solder termination methods provide equivalent electrical connection reliability. PCB design must accommodate the specific termination geometry of the selected part.

Q: Is the CMF3.1032.12 available in the same packaging as the 4304.6044?

A: The 4304.6044 packaging is not specified in available data. CMF3.1032.12 is supplied in bulk packaging. Confirm packaging requirements with your procurement specification.

Q: What approval agencies certify the CMF3.1032.12?

A: CCC, cULus, and VDE. The 4304.6044 carries cCSAus and VDE approvals. CMF3.1032.12 includes additional CCC certification, expanding regulatory coverage for international applications.