SCHURTER 4302.1002 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4302.1002 is an AC Power Entry Connector Receptacle module conforming to IEC 320-C14 standard with male blades configuration. This component serves as the primary power inlet interface for industrial and commercial electrical equipment requiring standardized AC power connection. The part is currently in active inventory status with 890 units available as new original stock.

Substitute parts become necessary when addressing specific application requirements such as panel mounting configurations, flange-based installation, or when managing component availability across supply chains while maintaining electrical and mechanical compatibility.

Substiute Parts

4302.1002

SCHURTER Inc.In Stock: 9044302.1002 Datasheet

Current PartRFQ

DC11.0001.007

SCHURTER Inc.In Stock: 1327DC11.0001.007 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part DC11.0001.007 maintains electrical compatibility with the main part 4302.1002 through identical core parameters:

• Connector Standard: Both conform to IEC 320-C14
• Connector Type: Both are Receptacle with Male Blades in Module configuration
• Voltage Rating: Both rated at 250VAC
• Current Rating: Both rated at 10A
• Number of Positions: Both feature 3 positions
• Filter Type: Both are Unfiltered - Commercial
• Termination: Both use Quick Connect - 0.189" (4.8mm)

The primary distinction lies in the mounting configuration: DC11.0001.007 includes Panel Mount with Flange capability, whereas 4302.1002 is specified as a module without flange designation. Both parts originate from SCHURTER Inc. and maintain active product status.

Parameter Comparison

Engineering Selection Recommendations

Selection between 4302.1002 and DC11.0001.007 is determined by installation methodology and regulatory compliance requirements:

Select 4302.1002 when the application requires module-based integration without panel flange mounting, and when the equipment design accommodates embedded connector modules.

Select DC11.0001.007 when panel-mount installation with flange is required, when the application demands documented compliance certifications (CCC, cULus, ENEC), when UL94 V-0 material flammability rating is specified, or when IP40 ingress protection is a system requirement. The DC11.0001.007 provides enhanced environmental protection and regulatory documentation suitable for commercial and industrial equipment requiring formal approval agency compliance.

Both parts maintain identical electrical performance at 250VAC, 10A, and 3-position IEC 320-C14 configuration, ensuring functional interchangeability within their respective mounting contexts.

Frequently Asked Questions (FAQ)

Q: Can DC11.0001.007 replace 4302.1002 in all applications?

A: Electrical compatibility is complete. Mechanical compatibility depends on the installation method. DC11.0001.007 is suitable for panel-mount applications with flange requirements. If the original design uses module-based mounting without panel integration, verify that the panel-mount flange does not create physical interference.

Q: What is the significance of the panel cutout dimensions (27.60mm x 31.60mm)?

A: These dimensions specify the rectangular opening required in the equipment panel for DC11.0001.007 installation. This parameter is not applicable to 4302.1002, which is designed as a module component without panel cutout requirements.

Q: Are the approval certifications (CCC, cULus, ENEC) required for my application?

A: Certification requirements depend on the target market and equipment classification. DC11.0001.007 carries documented compliance with CCC (China), cULus (Canada/US), and ENEC (Europe) standards. If your equipment requires certification in these regions, DC11.0001.007 provides documented compliance. 4302.1002 certification status is not specified in available documentation.

Q: What does IP40 ingress protection mean for DC11.0001.007?

A: IP40 rating indicates protection against solid objects larger than 1mm and no protection against liquid ingress. This is suitable for indoor commercial and industrial environments. If the application requires higher ingress protection (IP54 or above), verify that DC11.0001.007 meets the environmental specification.

Q: Is the Quick Connect termination (0.189" / 4.8mm) compatible between both parts?

A: Yes. Both 4302.1002 and DC11.0001.007 use identical Quick Connect termination at 0.189" (4.8mm), ensuring direct compatibility with mating connectors and wiring harnesses designed for this standard.

Q: What is the difference between the KEB1 and DC11 series designations?

A: Series designations indicate product family groupings within SCHURTER's portfolio. KEB1 is the series for 4302.1002, while DC11 is the series for DC11.0001.007. Both series contain IEC 320-C14 power entry connectors with compatible electrical specifications.