SCHURTER 4302.0102 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4302.0102 is a Power Entry Connector Receptacle module featuring IEC 320-C14 configuration with panel mount, snap-in installation. This component is classified as Obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing system support. The connector accommodates 10A at 250VAC with integrated switch-on-off illuminated functionality and unfiltered commercial design.

Key Parameters

Parameter	Value
Connector Style	IEC 320-C14
Connector Type	Receptacle, Male Blades - Module
Current Rating - Appliance Inlet	10A
Voltage Rating - Appliance Inlet	250VAC
Number of Positions	3
Mounting Type	Panel Mount, Snap-In
Termination	Quick Connect - 0.189" (4.8mm)
Panel Cutout Dimensions	Rectangular - 27.50mm x 31.50mm
Panel Thickness	0.059" (1.50mm)
Material Flammability Rating	UL94 V-0
Ingress Protection	IP40
Filter Type	Unfiltered - Commercial
Switch Features	Switch On-Off, Illuminated
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4302.0102 is determined by strict equivalence across the following critical parameters:

Connector Style & Type: IEC 320-C14 Receptacle, Male Blades - Module configuration
Electrical Ratings: 10A current and 250VAC voltage at appliance inlet
Mechanical Interface: Panel Mount, Snap-In with Quick Connect 0.189" (4.8mm) termination
Physical Compatibility: Panel cutout dimensions and thickness accommodation
Safety & Compliance: UL94 V-0 flammability rating, IP40 ingress protection, ROHS3 compliance
Functional Features: Switch On-Off with illumination, unfiltered commercial design

The substitute parts DC11.0021.201 and DC11.0021.206 maintain full equivalence across all critical parameters. Both are active products from the same manufacturer (SCHURTER Inc.) within the DC11 series, providing direct functional and mechanical replacement capability.

Parameter Comparison

Parameter	4302.0102 (Main)	DC11.0021.201	DC11.0021.206
Manufacturer	SCHURTER Inc.	SCHURTER Inc.	SCHURTER Inc.
Product Status	Obsolete	Active	Active
Series	KEB1	DC11	DC11
Connector Style	IEC 320-C14	IEC 320-C14	IEC 320-C14
Connector Type	Receptacle, Male Blades - Module	Receptacle, Male Blades - Module	Receptacle, Male Blades - Module
Current Rating - Appliance Inlet	10A	10A	10A
Voltage Rating - Appliance Inlet	250VAC	250VAC	250VAC
Number of Positions	3	3	3
Filter Type	Unfiltered - Commercial	Unfiltered - Commercial	Unfiltered - Commercial
Switch Features	Switch On-Off, Illuminated	Switch On-Off, Illuminated	Switch On-Off, Illuminated
Mounting Type	Panel Mount, Snap-In	Panel Mount, Snap-In	Panel Mount, Snap-In
Termination	Quick Connect - 0.189" (4.8mm)	Quick Connect - 0.189" (4.8mm)	Quick Connect - 0.189" (4.8mm)
Panel Cutout Dimensions	Rectangular - 27.50mm x 31.50mm	Rectangular - 27.60mm x 31.60mm	Rectangular - 27.60mm x 31.60mm
Panel Thickness	0.059" (1.50mm)	0.059" (1.50mm)	0.059" (1.50mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Ingress Protection	IP40	IP40	IP40
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Approval Agency	CCC, CSA, ENEC, UL	CCC, cULus, ENEC	CCC, cULus, ENEC
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99	EAR99
HTSUS	8536.69.4030	8536.69.4030	8536.69.4030

Engineering Selection Recommendations

Both DC11.0021.201 and DC11.0021.206 are qualified substitutes for the obsolete SCHURTER 4302.0102. Selection between the two active alternatives is based on availability and packaging requirements:

DC11.0021.201: Active product status with 1102 units in stock. Bulk packaging. Maintains full electrical and mechanical compatibility with the original 4302.0102 specification.

DC11.0021.206: Active product status with 889 units in stock. Bulk packaging. Maintains full electrical and mechanical compatibility with the original 4302.0102 specification.

Both parts carry equivalent regulatory approvals (CCC, cULus, ENEC) and meet ROHS3 compliance requirements. The panel cutout dimensions for both substitutes (27.60mm x 31.60mm) represent a minor increase of 0.10mm in each axis compared to the original (27.50mm x 31.50mm), which remains within standard panel mounting tolerances for snap-in connectors.

Frequently Asked Questions (FAQ)

Q: Can DC11.0021.201 or DC11.0021.206 be used as direct replacements for 4302.0102 in existing designs?

A: Yes. Both substitute parts maintain electrical equivalence (10A, 250VAC), mechanical compatibility (panel mount snap-in with 0.189" quick connect termination), and functional parity (switch on-off illuminated, unfiltered commercial). The panel cutout dimension variance (0.10mm increase) is within standard manufacturing tolerances for panel-mounted connectors.

Q: What is the difference between DC11.0021.201 and DC11.0021.206?

A: Both parts are functionally and electrically identical. They differ only in inventory availability (1102 units vs. 889 units) and represent variants within the same DC11 base product family (DC11.0021).

Q: Are the regulatory certifications equivalent across all three parts?

A: The substitute parts carry cULus certification in place of the original CSA and UL certifications. Both cULus and the original certifications meet North American safety standards. All three parts maintain CCC, ENEC, UL94 V-0, and ROHS3 compliance.

Q: What is the significance of the panel cutout dimension difference?

A: The substitute parts require panel cutout dimensions of 27.60mm x 31.60mm versus the original 27.50mm x 31.50mm. This 0.10mm increase per axis is standard tolerance variation in connector design and does not affect mechanical fit or functional performance in typical panel installations.

Q: Are both substitute parts available in the same packaging as the original?

A: The original 4302.0102 packaging is listed as unspecified. Both DC11.0021.201 and DC11.0021.206 are supplied in bulk packaging, which is standard for OEM component procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message