SCHURTER 4302.0101 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The SCHURTER 4302.0101 is a Power Entry Connector Receptacle module featuring IEC 320-C14 configuration with panel mount flange design. This component is classified as Obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements. The connector accommodates 10A at 250VAC with integrated switch-on-off illuminated functionality and unfiltered commercial design suitable for AC power applications.

Substiute Parts

4302.0101

SCHURTER Inc.In Stock: 9664302.0101 Datasheet

Current PartRFQ

DC11.0021.001

SCHURTER Inc.In Stock: 4800DC11.0021.001 Datasheet

SimilarRFQ

DC11.0021.006

SCHURTER Inc.In Stock: 865DC11.0021.006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 4302.0101 is determined by strict equivalence across the following critical parameters:

• Connector Style & Type: IEC 320-C14 Receptacle, Male Blades - Module configuration
• Electrical Ratings: 10A current and 250VAC voltage at appliance inlet
• Mechanical Interface: Panel Mount, Flange with Quick Connect 0.189" (4.8mm) termination
• Functional Features: Switch On-Off, Illuminated capability
• Safety & Compliance: UL94 V-0 flammability rating, IP40 ingress protection, and regulatory approvals (CCC, CSA/cULus, ENEC)
• Filter Configuration: Unfiltered - Commercial design

The substitute parts DC11.0021.001 and DC11.0021.006 maintain full equivalence across all critical parameters while offering Active product status and enhanced availability.

Parameter Comparison

Engineering Selection Recommendations

Both DC11.0021.001 and DC11.0021.006 are direct functional equivalents to the obsolete SCHURTER 4302.0101. Selection between these active alternatives should be based on the following criteria:

Product Status: The substitute parts maintain Active status, ensuring continued availability and manufacturing support compared to the Obsolete 4302.0101.

Regulatory Compliance: All three parts maintain ROHS3 compliance and REACH Unaffected status. The substitute parts carry CCC, cULus, and ENEC approvals, providing comprehensive regulatory coverage for global applications.

Panel Cutout Compatibility: The substitute parts feature panel cutout dimensions of 27.60mm x 31.60mm, compared to the main part's 27.50mm x 31.50mm specification. This 0.1mm tolerance increase on each dimension accommodates standard panel mounting practices without functional impact.

Inventory Availability: DC11.0021.001 offers the highest stock level at 4738 pieces, while DC11.0021.006 maintains 814 pieces, both substantially exceeding the 875 pieces available for the obsolete 4302.0101.

Frequently Asked Questions (FAQ)

Q: Are DC11.0021.001 and DC11.0021.006 electrically identical to the 4302.0101?

A: Yes. Both substitute parts maintain identical electrical specifications: 10A current rating, 250VAC voltage rating, 3-position configuration, and illuminated switch-on-off functionality. All three parts are unfiltered commercial designs with UL94 V-0 flammability rating and IP40 ingress protection.

Q: What is the difference between DC11.0021.001 and DC11.0021.006?

A: Both parts are functionally equivalent with identical electrical and mechanical specifications. The primary distinction is inventory availability, with DC11.0021.001 offering significantly higher stock levels (4738 vs. 814 pieces). Both share the same base product number DC11.0021 and Active product status.

Q: Will the substitute parts fit existing panel cutouts designed for the 4302.0101?

A: The substitute parts feature panel cutout dimensions of 27.60mm x 31.60mm compared to the 4302.0101's 27.50mm x 31.50mm. This represents a 0.1mm increase on each dimension. Existing panel cutouts designed for the 4302.0101 may require minor enlargement to accommodate the substitute parts. Verify panel cutout dimensions before installation.

Q: Are the termination interfaces compatible?

A: Yes. All three parts utilize identical Quick Connect termination at 0.189" (4.8mm), ensuring direct compatibility with existing wiring harnesses and connector interfaces.

Q: What regulatory approvals apply to the substitute parts?

A: DC11.0021.001 and DC11.0021.006 carry CCC, cULus, and ENEC approvals. The original 4302.0101 includes CSA and UL approvals in addition to CCC and ENEC. Verify that the substitute part approvals meet your specific regional regulatory requirements.

Q: Is packaging a consideration for part selection?

A: The 4302.0101 is supplied in unspecified packaging, while both substitute parts are supplied in Bulk packaging. Confirm bulk packaging compatibility with your procurement and assembly processes.