Amphenol CONEC 43-00097 Circular Connector Plug - Equivalent & Substitute Parts

Part Overview

The Amphenol CONEC 43-00097 is a 5-position circular connector plug with female sockets and screw termination. This component is classified as obsolete, which necessitates identification of active equivalent models to ensure design continuity and procurement availability. The 43-00098 serves as the direct active substitute, offering identical electrical and mechanical specifications with improved inventory availability.

Substiute Parts

43-00097

Amphenol CONECIn Stock: 71243-00097 Datasheet

Current PartRFQ

43-00098

Amphenol CONECIn Stock: 165343-00098 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of circular connector 43-00097 is determined by the following critical parameters:

• Connector Type and Position Count: Both the main part and substitute must maintain plug configuration with female sockets in 5-position arrangement
• Shell Size: M12-5 insert size ensures mechanical compatibility with mating receptacles
• Electrical Ratings: Current rating of 4A and voltage rating of 60V must be maintained
• Contact Finish: Gold plating on mating surfaces for corrosion resistance and signal integrity
• Ingress Protection: IP67 rating preservation for sealed applications
• Termination Method: Screw termination type for consistent installation procedures
• Material and Compliance: Polyamide shell material with ROHS3 compliance and RoHS3 certification

The Amphenol CONEC 43-00098 qualifies as a direct substitute based on identical conformance to these parameters, with the distinction that 43-00098 is active product status and features updated packaging (Bulk versus unspecified for 43-00097).

Parameter Comparison

Engineering Selection Recommendations

The Amphenol CONEC 43-00098 is the approved substitute for the obsolete 43-00097. Selection of 43-00098 is based on:

• Product Status Alignment: 43-00098 is active product status, ensuring continued availability and manufacturer support
• Regulatory Compliance: Both components maintain ROHS3 compliance and REACH Unaffected designation
• Electrical and Mechanical Equivalence: All critical parameters including current rating (4A), voltage rating (60V), connector configuration (5-position M12-5 plug), and ingress protection (IP67) are identical

The cable opening specification variance (43-00097: 4.00mm–6.00mm; 43-00098: 6.00mm–8.00mm) reflects the different packaging approaches and does not affect substitutability when mating with compatible receptacle inserts from the same series.

Frequently Asked Questions (FAQ)

Q: Can 43-00098 directly replace 43-00097 in existing designs? A: Yes. Both components share identical connector type, position count, shell size, electrical ratings, and contact finish. The difference in cable opening range requires verification that your cable gauge falls within the 43-00098 specification (6.00mm–8.00mm).

Q: What is the significance of the cable opening difference between these parts? A: Cable opening is the nominal diameter range for the wire bundle passing through the connector backshell. The 43-00098 accommodates larger diameter cables (6.00mm–8.00mm) compared to 43-00097 (4.00mm–6.00mm). Select based on your actual cable outer diameter.

Q: Are there any compliance or regulatory differences? A: No. Both components are ROHS3 compliant with Moisture Sensitivity Level 1 (unlimited shelf life) and REACH Unaffected status. Compliance profiles are equivalent.

Q: Why should I transition from 43-00097 to 43-00098? A: The 43-00097 is classified as obsolete product status. The 43-00098 offers the same electrical and mechanical functionality with active support and superior inventory availability (1601 units in stock versus 644 units for 43-00097).

Q: Does the packaging difference (Bulk versus unspecified) affect technical performance? A: No. Packaging designation indicates commercial availability format and does not affect connector electrical or mechanical characteristics.