TE Connectivity 4-2176092-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 4-2176092-9 is a 2.37 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified when alternative manufacturers produce resistors with matching or compatible electrical specifications and mechanical form factors. Substitute parts with lower power ratings remain functionally equivalent when the application circuit does not require the full 0.25W dissipation capacity.

Substiute Parts

4-2176092-9

TE Connectivity Passive ProductIn Stock: 8554-2176092-9 Datasheet

Current PartRFQ

ERA-6AEB2371V

Panasonic Electronic ComponentsIn Stock: 14359ERA-6AEB2371V Datasheet

DirectRFQ

RT0805BRD072K37L

YAGEOIn Stock: 11686RT0805BRD072K37L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 4-2176092-9 are qualified based on the following criteria:

Matching Parameters (Required for Substitution):

• Resistance value: 2.37 kOhms
• Tolerance: ±0.1%
• Composition: Thin Film
• Package / Case: 0805 (2012 Metric)
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Compatible Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) are compatible with the main part. The lower power rating does not affect substitution validity when circuit design does not demand the full 0.25W dissipation capacity. Both ratings operate within the same thermal and electrical envelope for the 0805 package.

The identified substitutes maintain identical electrical performance characteristics and mechanical compatibility with the original part.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 4-2176092-9 (Primary Part)

The TE Connectivity 4-2176092-9 remains the primary specification when 0.25W power dissipation capacity is required. This part is ROHS3 compliant and maintains Active product status with established supply chain availability.

Panasonic ERA-6AEB2371V (Substitute)

The Panasonic ERA-6AEB2371V is a direct substitute with identical electrical specifications and mechanical compatibility. This part carries AEC-Q200 automotive qualification, which provides additional reliability assurance for applications requiring automotive-grade components. The 0.125W power rating is suitable for circuits where power dissipation does not exceed this threshold. REACH Unaffected status is confirmed.

YAGEO RT0805BRD072K37L (Substitute)

The YAGEO RT0805BRD072K37L is a direct substitute with identical electrical specifications and mechanical compatibility. This part is ROHS3 compliant with REACH Unaffected status. The 0.125W power rating is suitable for circuits where power dissipation does not exceed this threshold.

All three parts are Active products with confirmed availability and comply with environmental regulations.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB2371V or YAGEO RT0805BRD072K37L be used as direct replacements for the TE Connectivity 4-2176092-9?

A: Yes. Both substitute parts match the critical electrical parameters: 2.37 kOhms resistance, ±0.1% tolerance, thin film composition, ±25ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. All three parts are housed in identical 0805 (2012 Metric) packages with compatible mechanical dimensions. The lower power rating of the substitutes (0.125W versus 0.25W) does not prevent substitution when circuit design does not require the full 0.25W dissipation capacity.

Q: What is the difference in power rating between the main part and the substitutes?

A: The TE Connectivity 4-2176092-9 is rated at 0.25W (1/4W), while the Panasonic ERA-6AEB2371V and YAGEO RT0805BRD072K37L are rated at 0.125W (1/8W). Both power ratings are valid for the 0805 package form factor. Selection between them depends on the actual power dissipation requirements of the application circuit. If the circuit dissipates less than 0.125W through the resistor, either part is suitable.

Q: Are there any height differences between these parts?

A: The TE Connectivity 4-2176092-9 has a maximum seated height of 0.026" (0.65mm), while both substitute parts have a maximum seated height of 0.024" (0.60mm). This 0.002" (0.05mm) difference is within typical PCB assembly tolerances and does not affect mechanical compatibility or board-level integration.

Q: Does the Panasonic ERA-6AEB2371V offer any additional benefits?

A: The Panasonic ERA-6AEB2371V carries AEC-Q200 automotive qualification, which indicates compliance with automotive reliability and quality standards. This certification is beneficial for applications requiring automotive-grade component assurance. The part maintains identical electrical specifications to the main part and is REACH Unaffected.

Q: What is the packaging difference between these parts?

A: The TE Connectivity 4-2176092-9 is supplied in Tape & Reel (TR) packaging. The Panasonic ERA-6AEB2371V is supplied in Cut Tape (CT) & Digi-Reel® packaging. The YAGEO RT0805BRD072K37L is supplied in Tape & Reel (TR) packaging. Packaging format does not affect component electrical or mechanical performance; it relates to supply and handling logistics.

Q: Are all three parts RoHS compliant?

A: Yes. The TE Connectivity 4-2176092-9, Panasonic ERA-6AEB2371V, and YAGEO RT0805BRD072K37L are all ROHS3 compliant. All three parts maintain MSL 1 (Unlimited) moisture sensitivity rating.

Q: Can these parts be used interchangeably in high-precision applications?

A: Yes. All three parts share identical tolerance specifications (±0.1%) and temperature coefficients (±25ppm/°C), making them suitable for high-precision applications requiring tight resistance accuracy and stable performance across the -55°C ~ 155°C operating range.