Ohmite 41J22R Equivalent & Substitute Parts

Part Overview

The Ohmite 41J22R is a 22 Ohm, 1W through-hole axial wirewound resistor from the Ohmicone® 40 series. This component is designed for general-purpose resistive applications requiring precise resistance values with tight tolerance specifications. The part is currently active in production with 696 pieces available in new original stock. Equivalent and substitute parts are identified when identical electrical and mechanical parameters are maintained across alternative packaging configurations or compliance certifications.

Substiute Parts

41J22R

OhmiteIn Stock: 72441J22R Datasheet

Current PartRFQ

41J22RE

OhmiteIn Stock: 119341J22RE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 41J22R is determined by matching the following critical parameters: resistance value (22 Ohms), tolerance (±5%), power rating (1W), composition (wirewound), package type (axial), temperature coefficient (±20ppm/°C), and physical dimensions (0.126" Dia x 0.437" L). The identified substitute part maintains all electrical and mechanical specifications while differing in packaging configuration and regulatory compliance status. This substitution is valid for applications where the alternative packaging and compliance certifications are acceptable.

Parameter Comparison

Engineering Selection Recommendations

The 41J22RE serves as a direct parametric equivalent to the 41J22R, with all electrical and mechanical specifications identical. The primary distinction is the RoHS compliance status: the 41J22RE is ROHS3 compliant, while the 41J22R is RoHS non-compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. For applications requiring RoHS3 compliance, the 41J22RE is the appropriate choice. For applications without RoHS compliance mandates, either part is functionally equivalent. Both parts are active in production and available in stock.

Frequently Asked Questions (FAQ)

Q: Can the 41J22RE replace the 41J22R in all applications? A: The 41J22RE is electrically and mechanically identical to the 41J22R. Substitution is valid provided the application does not have specific packaging requirements that distinguish between standard and bulk packaging configurations. The primary consideration is RoHS compliance status.

Q: What is the difference between the 41J22R and 41J22RE? A: Both parts are 22 Ohm, 1W wirewound axial resistors from the Ohmicone® 40 series with identical electrical specifications. The 41J22R is supplied in standard packaging and is RoHS non-compliant. The 41J22RE is supplied in bulk packaging and is ROHS3 compliant.

Q: Are there any dimensional differences between these parts? A: No. Both the 41J22R and 41J22RE have identical physical dimensions of 0.126" diameter by 0.437" length (3.20mm x 11.10mm).

Q: Which part should I select for a new design? A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance, specify the 41J22RE. For applications without RoHS compliance requirements, either part is suitable based on availability and packaging needs.

Q: Are both parts currently available? A: Yes. The 41J22R has 696 pieces in stock, and the 41J22RE has 1088 pieces in stock as new original inventory.