Ohmite 41J220 Equivalent & Substitute Parts

Part Overview

The Ohmite 41J220 is a 220 Ohm, 1W axial wirewound resistor from the Ohmicone® 40 series. This through-hole component is designed for general-purpose applications requiring precise resistance values with tight tolerance specifications. The part is currently active in production with 1,130 units in stock. Substitute parts are identified when packaging configurations differ or when RoHS compliance requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

41J220

OhmiteIn Stock: 116741J220 Datasheet

Current PartRFQ

41J220E

OhmiteIn Stock: 92541J220E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 41J220 is determined by matching the following critical parameters:

• Resistance value: 220 Ohms
• Tolerance: ±5%
• Power rating: 1W
• Composition: Wirewound
• Package configuration: Axial
• Temperature coefficient: ±20ppm/°C
• Physical dimensions: 0.126" Dia x 0.437" L (3.20mm x 11.10mm)
• Termination count: 2

The 41J220E qualifies as a parametric equivalent because it maintains identical electrical characteristics and mechanical form factor. The primary distinction is packaging configuration (Bulk versus standard packaging) and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the 41J220 and 41J220E are active production components from Ohmite's Ohmicone® 40 series with identical electrical and mechanical specifications. Selection between these parts should be based on the following criteria:

41J220 is appropriate for applications where RoHS non-compliant components are acceptable and standard packaging is required.

41J220E is the preferred choice for applications subject to ROHS3 compliance requirements or when bulk packaging aligns with procurement workflows. The bulk packaging configuration does not affect electrical performance or mechanical compatibility.

Both parts carry the same ECCN (EAR99) and HTSUS (8533.21.0080) classifications, indicating equivalent regulatory treatment for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can 41J220E be used as a direct replacement for 41J220?

A: Yes. The 41J220E is electrically and mechanically identical to the 41J220. The only differences are packaging configuration (Bulk) and RoHS compliance status (ROHS3 Compliant versus non-compliant). Both parts are pin-compatible and functionally interchangeable in circuit applications.

Q: What is the significance of the RoHS compliance difference?

A: RoHS3 compliance indicates the 41J220E meets Restriction of Hazardous Substances regulations, making it suitable for applications in regulated markets or end-use categories requiring compliance documentation. The 41J220 is not RoHS compliant and should be used only where such compliance is not mandated.

Q: Does packaging type affect electrical performance?

A: No. Bulk packaging is a procurement and logistics consideration only. It does not alter the electrical characteristics, tolerance, power rating, or temperature coefficient of the resistor.

Q: Are both parts available in the same quantities?

A: Inventory levels differ. The 41J220 has 1,130 units in stock, while the 41J220E has 903 units in stock. Availability should be confirmed at the time of procurement.

Q: What are the key parameters that must match for substitution?

A: Resistance value (220 Ohms), tolerance (±5%), power rating (1W), composition (Wirewound), package type (Axial), temperature coefficient (±20ppm/°C), and physical dimensions (0.126" Dia x 0.437" L) must all remain constant for a valid substitution.