Ohmite 41J200 Equivalent & Substitute Parts

Part Overview

The Ohmite 41J200 is a 200 Ohm, 1W through-hole axial wirewound resistor from the Ohmicone® 40 series. This component is designed for applications requiring precision resistive elements with wirewound construction and tight tolerance specifications. The part maintains active product status with 836 units in current inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained within the specified tolerances and packaging configurations.

Substiute Parts

41J200

OhmiteIn Stock: 87141J200 Datasheet

Current PartRFQ

41J200E

OhmiteIn Stock: 89141J200E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 41J200 are qualified based on the following critical parameters:

• Resistance value: 200 Ohms (exact match required)
• Tolerance: ±5% (equivalent or tighter tolerance acceptable)
• Power rating: 1W (exact match required)
• Composition: Wirewound (exact match required)
• Package type: Axial through-hole (exact match required)
• Temperature coefficient: ±20ppm/°C (equivalent or better performance acceptable)
• Number of terminations: 2 (exact match required)

The Ohmite 41J200E qualifies as a parametric equivalent based on matching all critical electrical and mechanical parameters within the allowed substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

Both the Ohmite 41J200 and 41J200E maintain active product status and identical regulatory classifications (RoHS non-compliant, EAR99, HTSUS 8533.21.0080). Selection between these parts should be based on:

• Packaging requirements: The 41J200 is supplied in standard packaging, while the 41J200E is available in bulk packaging
• Inventory availability: 41J200 has 836 units in stock; 41J200E has 873 units in stock
• Application-specific compliance needs: Both parts carry identical RoHS and export control designations

The 41J200E represents a direct parametric equivalent suitable for applications where the 41J200 is specified, provided packaging and procurement requirements align with bulk supply options.

Frequently Asked Questions (FAQ)

Q: Can the 41J200E be used as a direct replacement for the 41J200?

A: Yes. The 41J200E matches all critical electrical parameters (200 Ohms, ±5% tolerance, 1W power rating, wirewound composition) and mechanical specifications (axial package, 2 terminations). The primary difference is packaging format: bulk versus standard.

Q: What are the key parameters that determine substitutability?

A: Resistance value, tolerance, power rating, composition type, package configuration, and termination count must match exactly. Temperature coefficient and regulatory compliance should be equivalent or superior.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (bulk versus standard) does not affect the electrical or mechanical performance of the resistor. Selection should be based on procurement and assembly requirements.

Q: Are there compliance differences between the main part and substitute?

A: No. Both the 41J200 and 41J200E carry identical RoHS non-compliant status, EAR99 export classification, and HTSUS coding.

Q: What should be verified before substitution in production?

A: Confirm that bulk packaging (41J200E) is compatible with your assembly process and procurement workflow. Verify that inventory levels meet production schedules for both options.