416WF32012IMR Crystal Oscillator - Equivalent & Substitute Parts

Part Overview

The 416WF32012IMR is a 32 MHz fundamental mode crystal oscillator manufactured by CTS-Frequency Controls, designed for surface mount applications requiring precise frequency stability. This Active product is specified for 4pF load capacitance with ±10ppm frequency tolerance and operates across the -40°C to 85°C temperature range. Substitute parts are identified to provide equivalent electrical and mechanical performance for applications where the original part is unavailable or inventory constraints require alternative sourcing.

Substiute Parts

416WF32012IMR

CTS-Frequency ControlsIn Stock: 1086416WF32012IMR Datasheet

Current PartRFQ

ABM12W-32.0000MHZ-4-D1X-T3

Abracon LLCIn Stock: 22575ABM12W-32.0000MHZ-4-D1X-T3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 416WF32012IMR is determined by strict equivalence across the following critical parameters:

• Frequency: 32 MHz (exact match required)
• Frequency Tolerance: ±10ppm (exact match required)
• Load Capacitance: 4pF (exact match required)
• ESR: 100 Ohms (exact match required)
• Operating Mode: Fundamental (exact match required)
• Package / Case: 4-SMD, No Lead (exact match required)
• Operating Temperature Range: -40°C to 85°C (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Regulatory Compliance: ROHS3 Compliant and REACH Unaffected (exact match required)

The ABM12W-32.0000MHZ-4-D1X-T3 meets all substitution criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the 416WF32012IMR and ABM12W-32.0000MHZ-4-D1X-T3 are Active products with identical electrical specifications and regulatory compliance status. The ABM12W-32.0000MHZ-4-D1X-T3 offers a marginal height advantage (0.016" versus 0.018" seated height), which may provide benefit in space-constrained applications. Both parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory alignment for current manufacturing standards. Selection between these parts should be based on availability, lead time, and procurement cost, as electrical and mechanical performance are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the ABM12W-32.0000MHZ-4-D1X-T3 be used as a direct replacement for the 416WF32012IMR?

A: Yes. Both parts share identical frequency (32 MHz), frequency tolerance (±10ppm), load capacitance (4pF), ESR (100 Ohms), operating mode (Fundamental), package type (4-SMD, No Lead), and temperature range (-40°C to 85°C). Electrical performance is equivalent.

Q: Are there any physical differences between these parts?

A: The seated height differs slightly: the 416WF32012IMR has a maximum seated height of 0.018" (0.45mm), while the ABM12W-32.0000MHZ-4-D1X-T3 is 0.016" (0.40mm). Both maintain identical length and width dimensions (0.063" x 0.047" or 1.60mm x 1.20mm). This difference is negligible for most applications.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory standards.

Q: What is the load capacitance specification, and why is it important for substitution?

A: Load capacitance is specified at 4pF for both parts. This parameter determines the crystal's frequency response in the circuit and must match exactly for proper oscillation and frequency accuracy. Mismatched load capacitance will result in frequency deviation.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes, provided the PCB footprint accommodates the 4-SMD, No Lead package. The marginal height difference (0.002" or 0.05mm) is within standard PCB assembly tolerances and does not affect interchangeability.