416WF25012IMR Equivalent & Substitute Parts

Part Overview

The 416WF25012IMR is a 25 MHz surface mount crystal oscillator manufactured by CTS-Frequency Controls. This component is designed for applications requiring precise frequency generation with tight tolerance specifications. The part is actively produced and widely used in consumer electronics, telecommunications, and industrial equipment. Substitute parts may be required due to supply chain considerations, regional availability, or design flexibility in component sourcing.

Substiute Parts

416WF25012IMR

CTS-Frequency ControlsIn Stock: 988416WF25012IMR Datasheet

Current PartRFQ

ABM12W-25.0000MHZ-4-D1X-T3

Abracon LLCIn Stock: 5824ABM12W-25.0000MHZ-4-D1X-T3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ABM12W-25.0000MHZ-4-D1X-T3 qualifies as a direct substitute for the 416WF25012IMR based on the following critical parameters:

Frequency matching: Both parts operate at 25 MHz with identical ±10ppm frequency tolerance and ±20ppm frequency stability specifications. Load capacitance is identical at 4pF, ensuring circuit compatibility without redesign. ESR values match at 150 Ohms, maintaining signal integrity and oscillation characteristics. Operating temperature range is identical (-40°C ~ 85°C), confirming thermal compatibility. Package configuration is identical (4-SMD, No Lead) with matching physical dimensions (1.60mm x 1.20mm), enabling direct PCB footprint compatibility. Both parts maintain ROHS3 compliance and EAR99 export classification.

Parameter Comparison

Engineering Selection Recommendations

Both the 416WF25012IMR and ABM12W-25.0000MHZ-4-D1X-T3 are active production parts with full ROHS3 compliance and REACH unaffected status. Selection between these parts may be based on supply availability, lead time, or procurement preferences. The ABM12W variant offers a slightly lower maximum seated height (0.40mm vs 0.45mm), which may provide marginal benefits in space-constrained applications. Both parts are suitable for direct substitution in existing designs without circuit modification.

Frequently Asked Questions (FAQ)

Q: Can the ABM12W-25.0000MHZ-4-D1X-T3 replace the 416WF25012IMR in existing designs?

A: Yes. Both parts share identical electrical specifications (frequency, tolerance, load capacitance, ESR) and physical package dimensions, enabling direct substitution without PCB redesign or circuit modification.

Q: Are there differences in moisture sensitivity between these parts?

A: The 416WF25012IMR specifies MSL 1 (Unlimited), while the ABM12W variant lists MSL as Not Applicable. Both classifications indicate minimal moisture sensitivity concerns for standard handling and storage.

Q: What is the significance of the height difference (0.45mm vs 0.40mm)?

A: The height difference is negligible for most applications. The ABM12W's lower profile may provide marginal benefits only in extremely space-constrained designs with tight clearance requirements.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes, meeting identical regulatory requirements.

Q: Which part should be selected for new designs?

A: Selection should be based on supply chain availability and procurement lead times. Both parts are functionally equivalent and suitable for new designs requiring 25 MHz crystals with 4pF load capacitance and 150 Ohm ESR specifications.