416MA101P Equivalent & Substitute Parts

Part Overview

The 416MA101P is a through-hole trimmer potentiometer manufactured by TE Connectivity Passive Product, part of the 416 and Citec series. This component is a 100 Ohm, 0.2W (1/5W) cermet trimmer with PC pin termination and top adjustment capability. The 416MA101P is classified as obsolete, making identification of equivalent substitute parts essential for ongoing production support, repair operations, and design continuity. Active equivalent models from Bourns Inc. provide direct functional replacement with identical electrical and mechanical specifications.

Substiute Parts

416MA101P

TE Connectivity Passive ProductIn Stock: 1053416MA101P Datasheet

Current PartRFQ

3306F-1-101

Bourns Inc.In Stock: 29603306F-1-101 Datasheet

SimilarRFQ

3306P-1-101

Bourns Inc.In Stock: 15643306P-1-101 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 416MA101P is based on strict equivalence across all critical electrical and mechanical parameters. The substitute parts 3306F-1-101 and 3306P-1-101 from Bourns Inc. are qualified as direct replacements because they match the following parameters without deviation:

• Resistance value: 100 Ohms
• Power rating: 0.2W (1/5W)
• Tolerance: ±25%
• Temperature coefficient: ±250ppm/°C
• Number of turns: 1 Turn
• Adjustment type: Top Adjustment
• Resistive material: Cermet
• Mounting type: Through Hole
• Termination style: PC Pins
• Physical dimensions: Rectangular - 0.319" x 0.268" Face (8.10mm x 6.80mm)
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Both substitute parts are manufactured by Bourns Inc. as part of the Trimpot® 3306 Open Frame series and maintain active product status, ensuring continued availability and supply chain reliability.

Parameter Comparison

Engineering Selection Recommendations

The 416MA101P is obsolete and no longer supported by TE Connectivity Passive Product. Both substitute parts, 3306F-1-101 and 3306P-1-101, are active products from Bourns Inc. with confirmed availability and full compliance certifications.

3306F-1-101 is the primary substitute option. This part maintains all electrical and mechanical equivalence to the 416MA101P and carries ROHS3 compliance with REACH Unaffected status. Current inventory of 2900 pieces supports immediate procurement.

3306P-1-101 is an alternative substitute with identical specifications to 3306F-1-101. The difference between these two Bourns parts lies in the base product designation (3306F versus 3306P), which reflects internal Bourns product line categorization. Both parts are functionally equivalent for the 416MA101P application. Current inventory of 1490 pieces is available.

Selection between 3306F-1-101 and 3306P-1-101 depends on supply chain preference and inventory availability. Both parts satisfy all regulatory and compliance requirements for direct substitution.

Frequently Asked Questions (FAQ)

Q: Can 3306F-1-101 and 3306P-1-101 be used interchangeably as substitutes for 416MA101P?

A: Yes. Both parts are direct equivalents to the 416MA101P. They share identical electrical specifications (100 Ohms, 0.2W, ±25% tolerance, ±250ppm/°C), mechanical dimensions (0.319" x 0.268" face), and functional characteristics (1-turn top adjustment, cermet resistive material, PC pin termination, through-hole mounting). The difference between 3306F-1-101 and 3306P-1-101 is internal product line designation within Bourns; both are functionally identical for this application.

Q: What is the difference between 3306F-1-101 and 3306P-1-101?

A: Both parts are manufactured by Bourns Inc. as part of the Trimpot® 3306 Open Frame series. The designations 3306F and 3306P represent different base product lines within Bourns' product portfolio. All electrical, mechanical, and performance specifications are identical. Selection between them is based on supply chain availability and inventory preference.

Q: Are the physical dimensions identical between the 416MA101P and substitute parts?

A: Yes. All three parts share identical rectangular dimensions of 0.319" x 0.268" face (8.10mm x 6.80mm). Direct board-level substitution is supported without mechanical redesign or PCB layout modification.

Q: Do the substitute parts meet the same compliance standards as the 416MA101P?

A: Yes. Both 3306F-1-101 and 3306P-1-101 are ROHS3 compliant and carry REACH Unaffected status. The 416MA101P lists REACH status as Vendor Undefined; the substitute parts provide confirmed REACH compliance documentation.

Q: Why is the 416MA101P classified as obsolete?

A: The 416MA101P is an obsolete product from TE Connectivity Passive Product. Active equivalent models from Bourns Inc. provide continued support for this functional requirement. The Bourns Trimpot® 3306 series represents the current industry standard for 100 Ohm, 0.2W cermet trimmer potentiometers with PC pin termination.

Q: What is the moisture sensitivity level for these parts?

A: All three parts carry Moisture Sensitivity Level (MSL) 1, which indicates unlimited shelf life without moisture control requirements. No special storage or handling procedures are necessary.

Q: Are there any electrical performance differences between the parts?

A: No. The 416MA101P, 3306F-1-101, and 3306P-1-101 are electrically identical. Resistance value, power rating, tolerance, temperature coefficient, and adjustment characteristics are identical across all three parts.