416F32013IAT 32 MHz Crystal Equivalent & Substitute Parts

Part Overview

The 416F32013IAT is a 32 MHz fundamental mode crystal manufactured by CTS-Frequency Controls, designed for surface mount applications in 4-SMD, No Lead packaging. This part operates across the -40°C to 85°C temperature range with ±10ppm frequency tolerance and 10pF load capacitance. The product is discontinued at DiGi Electronics, making equivalent and substitute parts necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value
Frequency	32 MHz
Frequency Tolerance	±10ppm
Load Capacitance	10pF
ESR (Equivalent Series Resistance)	80 Ohms
Operating Temperature Range	-40°C to 85°C
Mounting Type	Surface Mount
Package / Case	4-SMD, No Lead
Size / Dimension	0.063" L x 0.047" W (1.60mm x 1.20mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 416F32013IAT is determined by the following critical parameters:

Primary Substitution Criteria:

Frequency: 32 MHz (exact match required)
Frequency Tolerance: ±10ppm (exact match required)
Operating Temperature Range: -40°C to 85°C (exact match required)
Mounting Type: Surface Mount (exact match required)
Package / Case: 4-SMD, No Lead (exact match required)

Secondary Substitution Parameters (with allowable variation):

Load Capacitance: 10pF ±2pF (8pF to 12pF acceptable within circuit design margins)
ESR: 80 Ohms ±20 Ohms (80 to 100 Ohms acceptable)
Frequency Stability: ±20ppm to ±30ppm (tighter stability acceptable)

Substitute parts are grouped into three categories:

Direct Substitutes (Load Capacitance Variants): Parts with identical frequency, tolerance, temperature range, and package, but different load capacitance values (8pF or 12pF). These are interchangeable when circuit load capacitance design permits.
Parametric Equivalents (CTS-Frequency Controls): Parts with identical electrical specifications but different product status or packaging format. These maintain the same ESR and frequency stability characteristics.
Cross-Manufacturer Equivalents: Parts from alternative manufacturers (Abracon LLC, EPSON) meeting all primary criteria with minor ESR variations (100 Ohms vs. 80 Ohms).

Parameter Comparison

Part Number	Manufacturer	Frequency	Frequency Tolerance	Load Capacitance	ESR (Ohms)	Frequency Stability	Package	Product Status
416F32013IAT	CTS-Frequency Controls	32 MHz	±10ppm	10pF	80	±30ppm	4-SMD, No Lead	Discontinued
416F32013IKR	CTS-Frequency Controls	32 MHz	±10ppm	8pF	80	±30ppm	4-SMD, No Lead	Active
416F32013ILR	CTS-Frequency Controls	32 MHz	±10ppm	12pF	80	±30ppm	4-SMD, No Lead	Active
416F32012IAR	CTS-Frequency Controls	32 MHz	±10ppm	10pF	80	±20ppm	4-SMD, No Lead	Active
416F32013IAR	CTS-Frequency Controls	32 MHz	±10ppm	10pF	80	±30ppm	4-SMD, No Lead	Active
ABM13W-32.0000MHZ-7-D1Y-T5	Abracon LLC	32 MHz	±10ppm	7pF	100	±30ppm	4-SMD, No Lead	Active
FA-118T 32.0000MA30X-K3	EPSON	32 MHz	±10ppm	10pF	100	±30ppm	4-SMD, No Lead	Active

Engineering Selection Recommendations

First Priority - Direct Replacement: 416F32013IAR (CTS-Frequency Controls) is the primary substitute. It maintains identical electrical specifications to the 416F32013IAT with matching 10pF load capacitance, 80 Ohms ESR, and ±30ppm frequency stability. Product status is Active with current inventory availability.

Second Priority - Load Capacitance Variants: 416F32013IKR (8pF) and 416F32013ILR (12pF) are suitable when circuit design accommodates load capacitance variation. Both maintain 80 Ohms ESR and ±30ppm stability. Selection depends on oscillator circuit design specifications.

Third Priority - Enhanced Stability: 416F32012IAR offers tighter frequency stability (±20ppm vs. ±30ppm) with identical 10pF load capacitance and 80 Ohms ESR. This part is applicable when improved frequency accuracy is required.

Cross-Manufacturer Options: FA-118T 32.0000MA30X-K3 (EPSON) provides direct parameter equivalence with 10pF load capacitance and ±30ppm stability. ESR is 100 Ohms (20 Ohms higher than CTS parts), which may require circuit evaluation depending on oscillator design margins.

ABM13W-32.0000MHZ-7-D1Y-T5 (Abracon LLC) operates with 7pF load capacitance and 100 Ohms ESR. This part is suitable only when circuit design explicitly supports 7pF load capacitance.

All recommended substitutes maintain ROHS3 compliance, MSL 1 rating, and -40°C to 85°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can I use 416F32013IKR (8pF) or 416F32013ILR (12pF) as direct replacements for the 416F32013IAT (10pF)?

A: Load capacitance variants are interchangeable only when the oscillator circuit design accommodates the different load capacitance value. The crystal frequency and stability remain identical, but the circuit's load capacitance network must match the crystal specification. Verify your circuit schematic load capacitance before substitution.

Q: What is the difference between 416F32013IAT and 416F32013IAR?

A: Both parts share identical electrical specifications: 32 MHz, ±10ppm tolerance, 10pF load capacitance, 80 Ohms ESR, and ±30ppm stability. The primary difference is product status: 416F32013IAT is discontinued, while 416F32013IAR is active with current inventory. 416F32013IAR is the recommended replacement.

Q: Can I substitute the CTS-Frequency Controls 416F32013IAT with the EPSON FA-118T 32.0000MA30X-K3?

A: Yes, the EPSON part meets all primary substitution criteria with matching 32 MHz frequency, ±10ppm tolerance, 10pF load capacitance, and -40°C to 85°C operating range. The ESR is 100 Ohms compared to 80 Ohms in the CTS part. Verify that your oscillator circuit design accommodates the 20 Ohms ESR difference before implementation.

Q: Does the Abracon ABM13W-32.0000MHZ-7-D1Y-T5 work as a substitute?

A: The Abracon part matches frequency, tolerance, and temperature range but operates with 7pF load capacitance instead of 10pF. Substitution is only valid if your circuit design explicitly supports 7pF load capacitance. The ESR is also 100 Ohms. Confirm circuit compatibility before use.

Q: Are all substitute parts ROHS3 compliant?

A: Yes, all listed substitute parts maintain ROHS3 compliance and MSL 1 rating, matching the environmental and regulatory status of the original 416F32013IAT.

Q: What does frequency stability ±30ppm vs. ±20ppm mean for my application?

A: Frequency stability defines the maximum frequency drift over the operating temperature range. ±30ppm allows greater drift than ±20ppm. If your application requires tighter frequency accuracy across temperature variations, select 416F32012IAR (±20ppm). For general applications, ±30ppm is typically sufficient.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message