TE Connectivity AMP Connectors 415632-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 415632-1 is a BNC Connector Jack with female socket configuration, rated for 75 Ohms impedance and designed for panel mount through-hole solder applications. This connector operates at frequencies up to 2 GHz and is classified as Active product status. Alternative equivalent parts may be required due to inventory constraints, supply chain considerations, or specific packaging requirements while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

415632-1

TE Connectivity AMP ConnectorsIn Stock: 1191415632-1 Datasheet

Current PartRFQ

0731317003

MolexIn Stock: 11930731317003 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 415632-1 with the Molex 0731317003 is valid based on the following alignment of critical parameters:

Electrical Compatibility:

• Both connectors maintain 75 Ohms impedance specification
• Identical frequency maximum rating of 2 GHz
• Matching voltage rating of 500 V
• Equivalent mating cycle rating of 500 cycles

Mechanical Compatibility:

• Both utilize BNC connector style with female socket (jack) configuration
• Identical panel mount, through-hole mounting type
• Matching bayonet lock fastening mechanism
• Both feature bulkhead front-side nut mounting feature
• Solder contact and shield termination on both parts

Material and Environmental Compatibility:

• Both parts are ROHS3 compliant
• Identical Moisture Sensitivity Level rating of 1 (Unlimited)
• Both feature gold-plated center contacts and nickel body finish
• Phosphor bronze center contact material on both parts

Functional Equivalence:

• Single port configuration on both connectors
• Isolated feature present on both parts
• Housing color options (Black, Silver) available on both

Parameter Comparison

Engineering Selection Recommendations

Primary Selection - TE Connectivity 415632-1: Select the TE Connectivity AMP Connectors 415632-1 when the original specification is required. This part maintains Active product status and carries ROHS3 compliance certification. The part includes board guide feature and is available with 1179 pieces in current inventory.

Equivalent Substitute - Molex 0731317003: The Molex 0731317003 serves as a direct functional equivalent for the TE Connectivity 415632-1. Both connectors satisfy identical electrical performance requirements at 75 Ohms impedance and 2 GHz maximum frequency. Both maintain ROHS3 compliance and equivalent environmental ratings. The Molex part is supplied in tray packaging with included lockwasher and nut components, with 1167 pieces available in inventory.

Compliance Basis: Both parts maintain ROHS3 compliance status and Moisture Sensitivity Level 1 (Unlimited) rating, supporting deployment in standard industrial and commercial applications without additional handling restrictions.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0731317003 directly replace the TE Connectivity 415632-1 in existing designs?

A: Yes. Both connectors share identical BNC jack female socket configuration, 75 Ohms impedance, panel mount through-hole solder termination, and bayonet lock fastening. Electrical and mechanical performance characteristics are equivalent across all specified parameters.

Q: What is the difference in packaging between these two parts?

A: The TE Connectivity 415632-1 packaging specification is not provided in the technical data. The Molex 0731317003 is supplied in tray packaging and includes three components per connector: the connector body, one lockwasher, and one nut. Verify packaging requirements for your specific assembly process.

Q: Are there temperature or frequency limitations when substituting the Molex part?

A: The TE Connectivity 415632-1 specifies operating temperature range of -55°C to 85°C and maximum frequency of 2 GHz. The Molex 0731317003 does not provide these specifications in the available technical data. Both parts maintain identical voltage rating of 500 V and mating cycle rating of 500 cycles.

Q: Do both connectors meet the same compliance standards?

A: Yes. Both the TE Connectivity 415632-1 and Molex 0731317003 are ROHS3 compliant and carry Moisture Sensitivity Level 1 (Unlimited) rating. Both parts are classified as Active product status.

Q: What is the difference in included components?

A: The Molex 0731317003 includes three components per connector: the connector body, one lockwasher, and one nut. The TE Connectivity 415632-1 component inclusion is not specified in the technical data provided.

Q: Are the dielectric materials equivalent between these connectors?

A: The TE Connectivity 415632-1 uses Polymethylpentene (PMP) dielectric material. The Molex 0731317003 uses Polypropylene (PP) dielectric material. Both materials support the specified 75 Ohms impedance and electrical performance requirements.

Q: Can these connectors be used interchangeably in RF applications up to 2 GHz?

A: Both connectors are rated for BNC jack female socket configuration with 75 Ohms impedance. The TE Connectivity 415632-1 explicitly specifies 2 GHz maximum frequency. The Molex 0731317003 frequency specification is not provided. Verify frequency requirements against available technical documentation for the Molex part before final selection.