TE Connectivity AMP Connectors 415205-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 415205-1 is a BNC Connector Jack, Female Socket rated at 50 Ohms for panel mount, through-hole, right-angle applications. This coaxial RF connector features solder termination for both center contact and shield, with bayonet lock fastening. The part is currently active in production with 722 pieces in stock. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and support alternative sourcing strategies while maintaining electrical and mechanical compatibility.

Substiute Parts

415205-1

TE Connectivity AMP ConnectorsIn Stock: 757415205-1 Datasheet

Current PartRFQ

413515-7

TE Connectivity AMP ConnectorsIn Stock: 1124413515-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of coaxial RF connectors is determined by strict equivalence across electrical and mechanical parameters. The TE Connectivity AMP Connectors 413515-7 qualifies as a parametric equivalent to the 415205-1 based on the following criteria:

Electrical Equivalence:

• Identical impedance rating: 50 Ohms
• Identical maximum frequency: 4 GHz
• Identical voltage rating: 500 V
• Identical connector style and type: BNC Jack, Female Socket

Mechanical Equivalence:

• Identical mounting configuration: Panel Mount, Through Hole, Right Angle
• Identical fastening mechanism: Bayonet Lock
• Identical termination method: Solder for both center contact and shield
• Identical mounting feature: Bulkhead - Front Side Nut

Material and Environmental Equivalence:

• Identical operating temperature range: -55°C ~ 85°C
• Identical mating cycle rating: 500
• Identical dielectric material: Polymethylpentene (PMP)
• Identical center contact material: Phosphor Bronze
• Identical body material and finish: Zinc with Nickel plating
• Identical center contact plating: Gold

Both parts share identical features including Board Lock, Filter, and Isolated functionality. The 413515-7 is suitable for direct substitution in applications where the 415205-1 is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the 415205-1 and 413515-7 are active production parts from TE Connectivity AMP Connectors with identical electrical, mechanical, and environmental specifications. Selection between these parts may be based on the following factors:

Inventory Availability: The 413515-7 has 1036 pieces in stock compared to 722 pieces for the 415205-1, providing greater supply availability.

Compliance Status: The 415205-1 is marked as RoHS non-compliant, while the 413515-7 has RoHS status listed as Not applicable. Applications subject to RoHS requirements should reference the specific regulatory context and material composition documentation.

REACH Status: Both parts list REACH status as Vendor Undefined. Clarification on REACH compliance should be obtained directly from TE Connectivity for applications in regulated markets.

Packaging: The 415205-1 is specified as Bulk packaging, while the 413515-7 packaging is not specified in available data. Packaging requirements should be confirmed with the supplier.

Both parts are suitable for direct substitution in 50 Ohm BNC jack applications operating up to 4 GHz with panel mount, through-hole, right-angle configuration.

Frequently Asked Questions (FAQ)

Q: Can the 413515-7 be used as a direct replacement for the 415205-1?

A: Yes. The 413515-7 is a parametric equivalent with identical electrical impedance (50 Ohms), frequency rating (4 GHz), connector style (BNC Jack, Female Socket), mounting configuration (Panel Mount, Through Hole, Right Angle), termination method (Solder), and environmental specifications (Operating Temperature -55°C ~ 85°C, Voltage Rating 500 V, Mating Cycles 500).

Q: Are there any differences in material composition between these parts?

A: No. Both parts use identical materials: Phosphor Bronze center contact with Gold plating, Zinc body with Nickel finish, and Polymethylpentene (PMP) dielectric material.

Q: What is the maximum frequency rating for both connectors?

A: Both the 415205-1 and 413515-7 are rated for a maximum frequency of 4 GHz.

Q: Do both connectors support the same number of mating cycles?

A: Yes. Both connectors are rated for 500 mating cycles.

Q: What is the operating temperature range for these connectors?

A: Both connectors operate across the temperature range of -55°C to 85°C.

Q: Are there packaging differences between the two parts?

A: The 415205-1 is specified as Bulk packaging. The 413515-7 packaging specification is not provided in available data. Packaging requirements should be confirmed with the supplier.

Q: What is the voltage rating for these BNC connectors?

A: Both connectors are rated for 500 V.

Q: Do both parts include the same features?

A: Yes. Both parts include Board Lock, Filter, and Isolated features.

Q: What fastening mechanism do these connectors use?

A: Both connectors use Bayonet Lock fastening with a Bulkhead - Front Side Nut mounting feature.

Q: Are both parts currently in active production?

A: Yes. Both the 415205-1 and 413515-7 are listed as Active product status.