TE Connectivity 415024-1 F Type Coaxial Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 415024-1 is an F Type Connector Jack with female socket configuration, designed for 75 Ohm coaxial applications. This component functions as a panel-mount, through-hole, right-angle solder termination connector suitable for RF and coaxial cable interconnections. The part carries an obsolete product status, necessitating identification of active equivalent alternatives to ensure continued design support and procurement availability for new production builds and field replacements.

Substiute Parts

415024-1

TE Connectivity AMP ConnectorsIn Stock: 812415024-1 Datasheet

Current PartRFQ

5415276-2

TE Connectivity AMP ConnectorsIn Stock: 9425415276-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity 415024-1 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Connector style (F Type)
• Connector type (Jack, Female Socket)
• Impedance (75 Ohms)
• Frequency maximum rating (1 GHz)
• Voltage rating (500 V)
• Operating temperature range (-65°C ~ 85°C)

Mechanical Equivalence Criteria:

• Mounting type (Panel Mount, Through Hole, Right Angle)
• Mounting feature (Bulkhead - Front Side Nut)
• Contact termination method (Solder)
• Shield termination method (Solder)
• Fastening type (Threaded)
• Number of ports (1)

The substitute part TE Connectivity 5415276-2 satisfies all electrical and mechanical equivalence requirements. Material composition differences (center contact material, body material, body finish, and dielectric material) do not affect functional compatibility within the specified electrical and thermal operating parameters.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5415276-2 is the direct functional equivalent for the obsolete TE Connectivity 415024-1. Selection of the substitute part is based on the following engineering factors:

Product Status Consideration: The 415024-1 carries obsolete status, limiting long-term procurement viability. The 5415276-2 maintains active product status, ensuring continued availability and manufacturing support.

Compliance Enhancement: The 5415276-2 achieves RoHS Compliant certification, whereas the original part is RoHS non-compliant. This compliance improvement aligns with current regulatory requirements and supply chain standards.

Electrical and Mechanical Compatibility: All critical electrical parameters (impedance, frequency rating, voltage rating, operating temperature) and mechanical parameters (mounting configuration, termination method, connector geometry) are identical between the two parts. The substitute maintains full functional equivalence within specified operating conditions.

Material Composition: Differences in center contact material (Beryllium Copper versus Phosphor Bronze), body material (Zinc versus Brass), body finish (Tin versus Nickel), and dielectric material (PMP/POM Acetal versus Polypropylene) do not compromise electrical performance or mechanical compatibility within the defined electrical and thermal operating envelope.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5415276-2 be used as a direct replacement for the 415024-1 in existing designs?

A: Yes. The 5415276-2 is electrically and mechanically equivalent to the 415024-1 across all critical parameters including impedance, frequency rating, voltage rating, operating temperature, mounting configuration, and termination method. The substitute part maintains identical connector geometry and solder termination compatibility.

Q: What is the primary reason for substituting the 415024-1?

A: The 415024-1 carries obsolete product status. The 5415276-2 is an active product offering continued procurement availability, manufacturing support, and improved RoHS compliance.

Q: Are there differences in material composition between these parts?

A: Yes. The 5415276-2 uses Beryllium Copper for the center contact (versus Phosphor Bronze), Zinc body material (versus Brass), Tin body finish (versus Nickel), and PMP/POM Acetal dielectric (versus Polypropylene). These material differences do not affect electrical performance or mechanical compatibility within the specified operating parameters.

Q: What is the packaging difference between the two parts?

A: The 415024-1 packaging specification is not provided. The 5415276-2 is supplied in Bulk packaging. Confirm packaging requirements with procurement specifications for your application.

Q: Are both parts rated for the same frequency and impedance?

A: Yes. Both parts are rated for 1 GHz maximum frequency and 75 Ohm impedance, ensuring RF signal integrity and compatibility in coaxial cable applications.

Q: What is the operating temperature range for both connectors?

A: Both the 415024-1 and 5415276-2 operate across the identical temperature range of -65°C to 85°C, supporting applications across industrial and commercial thermal environments.

Q: Does the RoHS compliance difference affect functional performance?

A: No. RoHS compliance is a regulatory and supply chain requirement, not a functional performance parameter. The 5415276-2 RoHS Compliant status provides regulatory alignment without altering electrical or mechanical characteristics.

Q: Are the solder termination methods identical?

A: Yes. Both parts use solder termination for both contact and shield connections, maintaining identical PCB assembly and rework procedures.