Equivalent & Substitute Parts for TE Connectivity 414410-1 BNC Connector

Part Overview

The TE Connectivity AMP Connectors 414410-1 is a BNC Connector Jack, Female Socket rated at 75 Ohms for panel mount, through-hole, right-angle solder applications. This connector operates at frequencies up to 2 GHz with a bayonet lock fastening mechanism and supports 500 mating cycles. The part is currently obsolete, making equivalent and substitute components necessary for ongoing system maintenance and new design implementations. The connector features a silver housing with nickel-plated zinc body, gold-plated phosphor bronze center contact, and polymethylpentene dielectric material.

Key Parameters

Parameter	Value
Connector Style	BNC
Connector Type	Jack, Female Socket
Impedance	75 Ohms
Mounting Type	Panel Mount, Through Hole, Right Angle
Mounting Feature	Bulkhead - Front Side Nut
Contact Termination	Solder
Shield Termination	Solder
Fastening Type	Bayonet Lock
Frequency - Max	2 GHz
Voltage Rating	500 V
Mating Cycles	500
Operating Temperature	-55°C ~ 85°C
Number of Ports	1

Substitute Part Grouping Explanation

Substitution of the 414410-1 is determined by strict equivalence across the following critical parameters: BNC connector style, jack female socket type, 75 Ohm impedance, panel mount through-hole right-angle configuration with bulkhead front side nut mounting feature, solder contact and shield termination, bayonet lock fastening, 2 GHz maximum frequency, 500 V voltage rating, 500 mating cycles, and operating temperature range of -55°C to 85°C.

Parametric equivalents maintain all these specifications identically. Similar parts may deviate in frequency rating, dielectric material, body material composition, center contact material, or operating temperature range while preserving the core BNC jack 75 Ohm panel mount right-angle solder configuration. Parts are grouped as parametric equivalents when all electrical and mechanical parameters match the main part. Parts are grouped as similar when they share the same connector style, type, impedance, mounting configuration, and termination method but differ in one or more secondary parameters such as frequency capability, material composition, or temperature rating.

Parameter Comparison

Part Number	Manufacturer	Product Status	Connector Style	Impedance	Frequency Max	Mounting Type	Contact Termination	Voltage Rating	Operating Temperature	Mating Cycles	Center Contact Material	Body Material	Dielectric Material
414410-1	TE Connectivity AMP Connectors	Obsolete	BNC	75 Ohms	2 GHz	Panel Mount, Through Hole, Right Angle	Solder	500 V	-55°C ~ 85°C	500	Phosphor Bronze	Zinc	Polymethylpentene (PMP)
1274084-1	TE Connectivity AMP Connectors	Active	BNC	75 Ohms	2 GHz	Panel Mount, Through Hole, Right Angle	Solder	500 V	-55°C ~ 85°C	500	Phosphor Bronze	Zinc	Polymethylpentene (PMP)
222092-1	TE Connectivity AMP Connectors	Active	BNC	75 Ohms	2 GHz	Panel Mount, Through Hole, Right Angle	Solder	500 V	-55°C ~ 85°C	500	Beryllium Copper	Zinc	Polymethylpentene (PMP)
5414907-3	TE Connectivity AMP Connectors	Active	BNC	75 Ohms	2 GHz	Panel Mount, Through Hole, Right Angle	Solder	500 V	-55°C ~ 85°C	500	Beryllium Copper	Zinc	Polymethylpentene (PMP)
031-71043	Amphenol RF	Active	BNC	75 Ohms	1 GHz	Panel Mount, Through Hole, Right Angle	Solder	500 V	-55°C ~ 85°C	500	Phosphor Bronze	Zinc Die Cast	Polypropylene (PP)
364A795C	Winchester Interconnect	Active	BNC	75 Ohms	1 GHz	Panel Mount, Through Hole, Right Angle	Solder	500 V	-40°C ~ 165°C	500	Phosphor Bronze	Brass	Polypropylene (PP)
364M795M	Winchester Interconnect	Active	BNC	75 Ohms	4 GHz	Not Specified	Not Specified	500 V	-40°C ~ 165°C	500	Brass	Brass	Polytetrafluoroethylene (PTFE)
0731711980	Molex	Active	BNC	75 Ohms	2 GHz	Panel Mount, Through Hole, Right Angle	Solder	500 V	Not Specified	500	Beryllium Copper	Brass	Polytetrafluoroethylene (PTFE)

Engineering Selection Recommendations

Parametric Equivalents (Direct Replacements):

The TE Connectivity 1274084-1 is the primary parametric equivalent to 414410-1. Both parts maintain identical electrical and mechanical specifications including 2 GHz frequency rating, -55°C to 85°C operating temperature, and polymethylpentene dielectric. The 1274084-1 carries Active product status and is available in higher inventory quantities (928 pcs). This part is recommended as the first choice for direct replacement in applications requiring no design modification.

The TE Connectivity 222092-1 and 5414907-3 are parametric equivalents with identical core specifications. The 222092-1 differs only in center contact material (Beryllium Copper versus Phosphor Bronze) and includes mounting hardware (lockwasher and nut). The 5414907-3 also uses Beryllium Copper center contact and carries ROHS3 compliance certification, making it suitable for applications with RoHS requirements. The 5414907-3 offers the highest inventory availability (1420 pcs).

The Molex 0731711980 maintains 2 GHz frequency capability and identical mounting configuration with solder termination. It uses Beryllium Copper center contact and brass body with PTFE dielectric, offering ROHS3 compliance and REACH unaffected status.

Similar Parts (Frequency or Material Deviations):

The Amphenol RF 031-71043 operates at 1 GHz maximum frequency, which is lower than the 414410-1 specification of 2 GHz. This part is suitable only for applications operating below 1 GHz. It features phosphor bronze center contact and polypropylene dielectric with ROHS3 compliance.

The Winchester Interconnect 364A795C operates at 1 GHz maximum frequency and features an extended operating temperature range of -40°C to 165°C compared to the 414410-1 range of -55°C to 85°C. This part is suitable for high-temperature applications below 1 GHz operation.

The Winchester Interconnect 364M795M operates at 4 GHz maximum frequency, exceeding the 414410-1 specification. However, mounting type and contact termination specifications are not provided for this part, limiting its direct substitution applicability. This part is suitable only when higher frequency capability is required and mounting configuration compatibility is verified.

Frequently Asked Questions (FAQ)

Q: Can the 1274084-1 be used as a direct replacement for the obsolete 414410-1?

A: Yes. The 1274084-1 is a parametric equivalent with identical electrical and mechanical specifications. All parameters including impedance, frequency rating, mounting configuration, termination method, voltage rating, operating temperature, and mating cycles match the 414410-1. The 1274084-1 carries Active product status and is available in production quantities.

Q: What is the difference between the 222092-1 and 5414907-3?

A: Both parts are parametric equivalents to 414410-1 with identical core specifications. The primary difference is that 5414907-3 carries ROHS3 compliance certification while 222092-1 is RoHS non-compliant. The 222092-1 includes mounting hardware (lockwasher and nut) in its package. For applications requiring RoHS compliance, the 5414907-3 is the appropriate selection.

Q: Can the Amphenol RF 031-71043 replace the 414410-1 in all applications?

A: No. The 031-71043 operates at a maximum frequency of 1 GHz, while the 414410-1 is rated for 2 GHz. The 031-71043 is suitable only for applications operating at frequencies below 1 GHz. All other electrical and mechanical parameters are compatible.

Q: What is the advantage of the Winchester Interconnect 364A795C?

A: The 364A795C provides an extended operating temperature range of -40°C to 165°C compared to the 414410-1 range of -55°C to 85°C. However, it operates at a maximum frequency of 1 GHz. This part is suitable for high-temperature applications below 1 GHz operation.

Q: Why does the Winchester Interconnect 364M795M have incomplete specifications?

A: The 364M795M is listed with incomplete mounting type and contact termination data. While it offers 4 GHz frequency capability and PTFE dielectric material, the missing specifications prevent confirmation of full compatibility with the 414410-1 mounting and termination requirements. Verification of mounting configuration and termination method is required before selection.

Q: What does ROHS3 compliance mean for connector selection?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting the use of specific hazardous materials. Parts carrying ROHS3 certification (such as 5414907-3 and 0731711980) are required for applications subject to RoHS regulations. The 414410-1 is RoHS non-compliant, making ROHS3-compliant equivalents necessary for regulated applications.

Q: Are there packaging differences between substitute parts?

A: Yes. The 222092-1 and 5414907-3 are supplied in Bulk packaging. The 222092-1 includes three pieces per package (1 connector, 1 lockwasher, 1 nut). Other parts are supplied without specified packaging details. Packaging requirements should be verified against procurement specifications.

Q: Can the Molex 0731711980 be used in place of the 414410-1?

A: Yes. The 0731711980 maintains identical 2 GHz frequency capability, 75 Ohm impedance, panel mount through-hole right-angle configuration, and solder termination. It carries ROHS3 compliance and REACH unaffected status. Operating temperature is not specified for the Molex part, which should be verified against application requirements.

Q: What is the primary reason to select an active product over the obsolete 414410-1?

A: Active products ensure ongoing availability, production support, and supply chain continuity. The 414410-1 is obsolete, meaning it is no longer manufactured and inventory is limited. Selecting an active parametric equivalent such as 1274084-1, 222092-1, 5414907-3, or 0731711980 ensures long-term component availability and design sustainability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message