TE Connectivity AMP Connectors 413996-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 413996-4 is an SMB Connector Receptacle designed for RF coaxial applications requiring 50 Ohm impedance matching. This component features a male pin configuration with right-angle through-hole solder termination for PCB integration. The part is currently Active in product status with 1148 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity while maintaining full functional compatibility in 50 Ohm RF circuit applications.

Substiute Parts

413996-4

TE Connectivity AMP ConnectorsIn Stock: 1167413996-4 Datasheet

Current PartRFQ

414026-3

TE Connectivity AMP ConnectorsIn Stock: 1139414026-3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of coaxial RF connectors in the SMB category is determined by strict equivalence across electrical and mechanical parameters. The 413996-4 and its identified substitute 414026-3 share identical specifications for connector style, impedance, mounting configuration, termination method, frequency rating, operating temperature range, voltage rating, mating cycle count, and insertion loss characteristics. Both parts maintain 50 Ohm impedance with solder contact and shield termination, right-angle through-hole mounting, and identical RF performance to 4 GHz. The critical substitution parameters are:

• Connector Style: SMB
• Impedance: 50 Ohms
• Mounting Type: Through Hole, Right Angle
• Contact and Shield Termination: Solder
• Frequency - Max: 4 GHz
• Operating Temperature: -65°C ~ 165°C
• Voltage Rating: 335 V
• Insertion Loss: 0.6 dB

Parameter Comparison

Engineering Selection Recommendations

Both the 413996-4 and 414026-3 are Active products from TE Connectivity AMP Connectors with full RoHS compliance and identical electrical performance specifications for 50 Ohm RF coaxial applications. Selection between these parts is based on availability and inventory status. The 413996-4 maintains higher stock levels at 1148 units, while the 414026-3 provides an alternative source with 1061 units available. Both parts satisfy identical functional requirements for SMB receptacle applications with right-angle through-hole solder termination, 4 GHz frequency capability, and -65°C to 165°C operating temperature range. The primary material difference is the center contact composition: 413996-4 uses Beryllium Copper while 414026-3 uses Brass. Both configurations deliver the specified 0.6 dB insertion loss and 500 mating cycle rating. Component selection should prioritize inventory availability and supply chain requirements while maintaining full electrical and mechanical compatibility.

Frequently Asked Questions (FAQ)

Q: Are the 413996-4 and 414026-3 fully interchangeable in PCB designs?

A: Yes. Both parts are SMB Receptacle connectors with identical electrical specifications including 50 Ohm impedance, 4 GHz frequency rating, 335 V voltage rating, and 0.6 dB insertion loss. Both feature right-angle through-hole solder termination and operate across the same -65°C to 165°C temperature range. Mechanical footprints and mating cycle ratings are identical at 500 cycles.

Q: What is the difference between the center contact materials in these parts?

A: The 413996-4 uses Beryllium Copper for the center contact, while the 414026-3 uses Brass. Both materials are plated with gold and deliver the same electrical performance and insertion loss characteristics specified at 0.6 dB.

Q: Can these connectors be used interchangeably in high-frequency RF applications?

A: Yes. Both parts maintain 50 Ohm impedance and support frequencies up to 4 GHz with identical insertion loss performance. The PTFE dielectric material and gold-plated contacts in both configurations ensure consistent RF performance across the specified frequency range.

Q: Are both parts RoHS compliant?

A: Yes. Both the 413996-4 and 414026-3 are RoHS Compliant and carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without special moisture control requirements.

Q: Which part should be selected based on current inventory?

A: The 413996-4 has higher current inventory at 1148 units compared to 414026-3 at 1061 units. Selection should be based on immediate availability requirements and supply chain planning.

Q: Are the solder termination specifications identical for both parts?

A: Yes. Both the 413996-4 and 414026-3 feature solder contact termination and solder shield termination with identical snap-on fastening type and through-hole right-angle mounting configuration.