TE Connectivity AMP Connectors 413996-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 413996-2 is an SMB Connector Receptacle with male pin configuration, designed for 50 Ohm coaxial RF applications. This through-hole, right-angle solder connector operates at frequencies up to 4 GHz and is rated for 335 V with an operating temperature range of -65°C to 165°C. The connector features a snap-on fastening mechanism and gold-plated brass body with beryllium copper center contact material. The product maintains Active status and is RoHS Compliant with MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector specification, ensuring direct interchangeability in PCB assembly applications.

Substiute Parts

413996-2

TE Connectivity AMP ConnectorsIn Stock: 781413996-2 Datasheet

Current PartRFQ

414026-2

TE Connectivity AMP ConnectorsIn Stock: 5678414026-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 413996-2 are identified based on strict equivalence across critical electrical and mechanical parameters. The substitution criteria include:

Electrical Parameters: Impedance (50 Ohms), frequency maximum rating (4 GHz), voltage rating (335 V), insertion loss (0.6 dB), and mating cycle rating (500 cycles).

Mechanical Parameters: Connector style (SMB), connector type (Receptacle, Male Pin), mounting configuration (Through Hole, Right Angle), contact termination method (Solder), and shield termination method (Solder).

Environmental & Compliance Parameters: Operating temperature range (-65°C ~ 165°C), RoHS Compliance status, Moisture Sensitivity Level (MSL 1), and REACH Affected designation.

Material Specifications: Body material (Brass), body finish (Gold), center contact plating (Gold), and dielectric material (Polytetrafluoroethylene/PTFE).

The substitute part 414026-2 maintains equivalence across all critical parameters with one material variation: center contact material is Brass instead of Beryllium Copper. This material difference does not affect electrical performance or mechanical compatibility within the specified operating parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 413996-2 and 414026-2 are Active status products with full RoHS Compliance and REACH Affected designation. Selection between these parts is based on inventory availability and application-specific requirements.

The 413996-2 features beryllium copper center contact material and maintains 722 pieces in current inventory stock. The 414026-2 features brass center contact material with significantly higher inventory availability at 5,626 pieces in stock.

Both connectors satisfy identical electrical performance specifications including 50 Ohm impedance, 4 GHz maximum frequency, 335 V voltage rating, 0.6 dB insertion loss, and 500 mating cycle rating. Both operate across the -65°C to 165°C temperature range and maintain MSL 1 (Unlimited) moisture sensitivity classification.

The material difference in center contact composition does not alter the electrical or mechanical compatibility of either connector within the specified operating parameters. Both parts are suitable for direct substitution in PCB assembly applications requiring SMB receptacle connectors with right-angle through-hole solder termination.

Frequently Asked Questions (FAQ)

Q: Can the 414026-2 be used as a direct replacement for the 413996-2?

A: Yes. The 414026-2 is a parametric equivalent substitute for the 413996-2. Both connectors maintain identical electrical specifications (50 Ohm impedance, 4 GHz frequency rating, 335 V voltage rating, 0.6 dB insertion loss), mechanical configuration (SMB receptacle, male pin, through-hole right-angle solder termination), and environmental operating parameters (-65°C to 165°C). The center contact material differs (brass versus beryllium copper), but this does not affect performance within the specified operating range.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by equivalence across connector style (SMB), connector type (receptacle, male pin), impedance (50 Ohms), mounting configuration (through-hole, right-angle), termination method (solder), frequency rating (4 GHz), voltage rating (335 V), operating temperature range (-65°C to 165°C), mating cycle rating (500), and insertion loss (0.6 dB). Compliance status (RoHS, REACH, MSL) and material specifications (body material, plating, dielectric) must also remain equivalent.

Q: Are there inventory differences between these substitute parts?

A: Yes. The 413996-2 has 722 pieces in current stock, while the 414026-2 has 5,626 pieces available. Selection may be influenced by project timeline and inventory requirements.

Q: What is the difference in center contact material between these connectors?

A: The 413996-2 uses beryllium copper center contact material, while the 414026-2 uses brass center contact material. Both materials are plated with gold and maintain identical electrical performance within the specified operating parameters.

Q: Are both connectors RoHS Compliant?

A: Yes. Both the 413996-2 and 414026-2 are RoHS Compliant and carry REACH Affected designation with EAR99 ECCN classification.

Q: What is the maximum operating frequency for these connectors?

A: Both connectors are rated for maximum frequency operation up to 4 GHz with 50 Ohm impedance and 0.6 dB insertion loss.

Q: What is the moisture sensitivity level for these parts?

A: Both connectors carry MSL 1 (Unlimited) moisture sensitivity level classification, indicating no moisture sensitivity restrictions for storage or handling.