Equivalent & Substitute Parts for TE Connectivity 4-1393486-2 D-Sub Connector

Part Overview

The TE Connectivity AMP Connectors 4-1393486-2 is a 9 Position D-Sub Plug connector with male pins, designed for IDC ribbon cable termination in free-hanging inline applications. This connector features a DE shell size (Size 1) with tin-plated steel housing and gold-plated contacts. The product is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing system support and new designs requiring compatible D-Sub connector solutions.

Substiute Parts

4-1393486-2

TE Connectivity AMP ConnectorsIn Stock: 9634-1393486-2 Datasheet

Current PartRFQ

1658613-4

TE Connectivity AMP ConnectorsIn Stock: 11421658613-4 Datasheet

SimilarRFQ

301A10099X

Amphenol CONECIn Stock: 726301A10099X Datasheet

SimilarRFQ

301A10109X

Amphenol CONECIn Stock: 1268301A10109X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of D-Sub connectors is determined by alignment of critical parameters: connector style, connector type (plug with male pins), number of positions, shell size designation, mounting configuration, and termination method. The main part 4-1393486-2 is a 9-position free-hanging inline D-Sub plug with IDC ribbon cable termination and DE shell size.

Substitute parts are grouped based on the following criteria:

Direct Functional Equivalent (Same Position Count and Mounting):

• Part 1658613-4 maintains identical position count (9), connector type (plug, male pins), shell size (DE, Size 1), mounting type (free-hanging inline), and termination method (IDC ribbon cable). This part represents the closest functional equivalent with active product status.

Alternative Position Configurations (Different Position Counts):

• Parts 301A10099X and 301A10109X are D-Sub plugs with male pins and IDC ribbon cable termination but differ in position count (15 and 25 positions respectively) and shell size designations (DA Size 2 and DB Size 3). These parts also feature panel mount configuration rather than free-hanging inline mounting. These alternatives are applicable only when system redesign accommodates different connector footprints and mounting requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity 1658613-4

Part 1658613-4 is the recommended substitute for direct replacement applications. This connector maintains identical electrical and mechanical specifications: 9-position configuration, DE shell size, free-hanging inline mounting, and IDC ribbon cable termination. The part is classified as active product status, ensuring ongoing availability and supply chain continuity. Both the main part and this substitute are ROHS3 compliant with MSL 1 (Unlimited) rating, supporting equivalent environmental and reliability requirements.

Alternative Substitutes: Amphenol CONEC 301A10099X and 301A10109X

These parts are applicable only when system architecture permits modification to accommodate different connector positions and panel mount configuration. Part 301A10099X provides 15-position capacity with DA shell size, while 301A10109X provides 25-position capacity with DB shell size. Both alternatives are active products with ROHS3 compliance and REACH Unaffected status. Selection of these alternatives requires mechanical redesign of connector mounting interfaces and electrical reconfiguration of signal routing.

Frequently Asked Questions (FAQ)

Q: Can 1658613-4 be used as a direct replacement for 4-1393486-2?

A: Yes. Part 1658613-4 is a direct functional equivalent. Both connectors share identical position count (9), shell size (DE, Size 1), mounting type (free-hanging inline), and termination method (IDC ribbon cable). The substitute is active product status, providing supply continuity for the obsolete main part.

Q: What are the key differences between 1658613-4 and the main part 4-1393486-2?

A: The primary difference is product status: 1658613-4 is active while 4-1393486-2 is obsolete. Electrical and mechanical parameters are equivalent. Part 1658613-4 includes additional specifications: operating temperature range (-55°C to 105°C), current rating (1.25A), and dielectric material (Thermoplastic). The main part does not specify these parameters.

Q: Can 301A10099X or 301A10109X replace 4-1393486-2?

A: These parts are not direct replacements. They differ in position count (15 and 25 versus 9), shell size designation (DA and DB versus DE), and mounting type (panel mount versus free-hanging inline). Substitution requires mechanical redesign of the connector interface and electrical reconfiguration of the circuit board layout.

Q: What is the significance of the shell size designation?

A: Shell size determines the physical footprint and pin density of the D-Sub connector. Size 1 (DE) accommodates 9 positions, Size 2 (DA) accommodates 15 positions, and Size 3 (DB) accommodates 25 positions. Connectors of different shell sizes are not mechanically interchangeable and require different mating receptacles.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The main part 4-1393486-2 and all substitute parts (1658613-4, 301A10099X, 301A10109X) are ROHS3 compliant, meeting environmental and hazardous substance restrictions.

Q: What is the difference between free-hanging inline and panel mount configurations?

A: Free-hanging inline connectors are mounted directly to cables without fixed mechanical attachment to a panel or chassis. Panel mount connectors are secured to a panel or enclosure through a flange or mounting bracket. These configurations require different mechanical interfaces and are not interchangeable without redesign.

Q: Does the packaging type affect connector functionality?

A: No. Packaging type (bulk, box, or other formats) affects logistics and inventory management but does not alter electrical or mechanical connector specifications. Selection should be based on functional parameters and supply requirements.