TE Connectivity 413589-7 BNC Connector Plug 75 Ohm Crimp - Equivalent & Substitute Parts

Part Overview

The TE Connectivity 413589-7 is a BNC connector plug with male pin configuration, designed for 75 ohm coaxial cable applications. This component features crimp termination for both center contact and shield, free hanging (in-line) mounting, and bayonet lock fastening. The part is classified as obsolete, necessitating identification of equivalent substitute components for ongoing system maintenance and new procurement requirements. Substitute parts must maintain electrical compatibility, mechanical fit, and performance characteristics within the specified operating parameters.

Substiute Parts

413589-7

TE Connectivity AMP ConnectorsIn Stock: 1061413589-7 Datasheet

Current PartRFQ

5413589-7

TE Connectivity AMP ConnectorsIn Stock: 9175413589-7 Datasheet

DirectRFQ

031-70008-1000

Amphenol RFIn Stock: 1100031-70008-1000 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 413589-7 are identified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Primary Substitution Criteria:

• Connector style: BNC (bayonet lock fastening)
• Connector type: Plug with male pin configuration
• Impedance: 75 Ohms
• Termination method: Crimp for both center contact and shield
• Mounting configuration: Free hanging (in-line)
• Number of ports: 1

Secondary Compatibility Parameters:

• Voltage rating: 500 V minimum
• Mating cycles: 500 minimum
• Center contact material: Brass
• Body finish: Nickel
• Center contact plating: Gold
• Dielectric material compatibility with polyethylene or PTFE
• Operating temperature range overlap with -55°C ~ 85°C

Two substitute parts meet these criteria: TE Connectivity 5413589-7 and Amphenol RF 031-70008-1000. Both maintain identical BNC plug configuration, 75 ohm impedance, crimp termination, and free hanging mounting. Electrical performance parameters remain compatible across all three parts.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5413589-7 Selection Criteria:

The 5413589-7 maintains identical electrical and mechanical specifications to the main part 413589-7, with the primary distinction being RoHS compliance status. This substitute achieves RoHS Compliant certification while preserving all core performance parameters: 75 ohm impedance, 2 GHz maximum frequency, 500 V voltage rating, and 0.15 dB insertion loss. Body material differs (brass versus zinc), but both materials provide equivalent electromagnetic performance in this application. The 5413589-7 is classified as obsolete, consistent with the main part status. This substitute is suitable for direct replacement in applications where RoHS compliance is required.

Amphenol RF 031-70008-1000 Selection Criteria:

The 031-70008-1000 provides enhanced performance specifications while maintaining core BNC plug configuration and 75 ohm impedance. This substitute offers extended frequency capability (4 GHz versus 2 GHz), wider operating temperature range (-65°C ~ 165°C versus -55°C ~ 85°C), and ROHS3 compliance. Dielectric material is PTFE rather than polyethylene, providing superior thermal stability. Insertion loss is 0.2 dB compared to 0.15 dB in the main part. The product status is "Not For New Designs," indicating limited availability for future procurement. This substitute is applicable in applications requiring extended frequency response or broader temperature operation.

Compliance Considerations:

The main part 413589-7 is RoHS non-compliant. For applications subject to RoHS regulations, the 5413589-7 (RoHS Compliant) or 031-70008-1000 (ROHS3 Compliant) are required. Both substitutes maintain REACH Affected or Vendor Undefined status consistent with regulatory requirements. All three parts carry EAR99 export classification and identical HTSUS commodity codes.

Frequently Asked Questions (FAQ)

Q: Can the 5413589-7 be used as a direct replacement for the 413589-7?

A: Yes. The 5413589-7 maintains identical electrical performance (75 ohm impedance, 2 GHz frequency, 0.15 dB insertion loss) and mechanical configuration (BNC plug, crimp termination, free hanging mounting). The primary difference is RoHS compliance status. Both parts are classified as obsolete.

Q: What is the difference between the 413589-7 and the 031-70008-1000?

A: Both are BNC plug connectors with 75 ohm impedance and crimp termination. The 031-70008-1000 offers higher maximum frequency (4 GHz versus 2 GHz), extended operating temperature range (-65°C ~ 165°C versus -55°C ~ 85°C), and PTFE dielectric material. Insertion loss is 0.2 dB compared to 0.15 dB. The 031-70008-1000 is manufactured by Amphenol RF rather than TE Connectivity.

Q: Are there packaging differences between these substitute parts?

A: The 413589-7 and 5413589-7 have unspecified packaging. The 031-70008-1000 is supplied in bulk packaging. All three parts include identical component sets: 1 connector, 1 contact, and 1 ferrule per unit.

Q: Which substitute should be selected for new designs?

A: Both the 5413589-7 and 031-70008-1000 are classified as obsolete or "Not For New Designs." For new design applications, consultation with component suppliers is necessary to identify current production alternatives meeting BNC plug 75 ohm specifications.

Q: Do these connectors support the same cable groups?

A: The 413589-7 and 5413589-7 support AT&T 734A cable group. The 031-70008-1000 supports AT&T 734, 734A, and Belden 1505A cable groups, providing broader cable compatibility.

Q: What is the mating cycle rating for these connectors?

A: All three parts (413589-7, 5413589-7, and 031-70008-1000) are rated for 500 mating cycles, indicating equivalent mechanical durability.

Q: Are these parts suitable for high-temperature applications?

A: The 413589-7 and 5413589-7 operate within -55°C ~ 85°C. The 031-70008-1000 supports -65°C ~ 165°C, making it suitable for extended temperature range applications. Dielectric material (PTFE in the 031-70008-1000 versus polyethylene in the others) contributes to this temperature capability difference.

Q: What is the insertion loss specification for each part?

A: The 413589-7 and 5413589-7 specify 0.15 dB insertion loss. The 031-70008-1000 specifies 0.2 dB insertion loss. Both values are within acceptable ranges for 75 ohm BNC applications.