TE Connectivity 413476-2 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 413476-2 is an active BNC connector jack designed for RF coaxial applications requiring 50-ohm impedance. This female socket connector features panel mount through-hole solder termination with bayonet lock fastening, suitable for frequencies up to 4 GHz. The connector is supplied in tube packaging with 602 pieces in current inventory stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector's core functional specifications. Alternative part numbers may differ in packaging format, frequency rating, or regulatory compliance status while preserving the essential connector interface and termination characteristics.

Substiute Parts

413476-2

TE Connectivity AMP ConnectorsIn Stock: 613413476-2 Datasheet

Current PartRFQ

5413476-2

TE Connectivity AMP ConnectorsIn Stock: 18415413476-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 413476-2 is determined by strict equivalence in the following core parameters:

Mandatory Matching Parameters:

• Connector Style: BNC
• Connector Type: Jack, Female Socket
• Impedance: 50 Ohms
• Contact Termination: Solder
• Shield Termination: Solder
• Mounting Type: Panel Mount, Through Hole
• Mounting Feature: Bulkhead - Front Side Nut
• Fastening Type: Bayonet Lock
• Number of Ports: 1
• Operating Temperature Range: -55°C to 85°C
• Voltage Rating: 500 V
• Mating Cycles: 500

Parameters Permitted to Vary:

• Packaging format (Tube vs. Bulk)
• Frequency maximum rating
• RoHS compliance status
• REACH regulatory status
• Inventory availability

The substitute part 5413476-2 maintains all mandatory matching parameters while differing in packaging (Bulk vs. Tube), maximum frequency rating (1 GHz vs. 4 GHz), and regulatory compliance classifications.

Parameter Comparison

Engineering Selection Recommendations

413476-2 Selection Criteria:

• Applications requiring maximum frequency operation up to 4 GHz
• Designs where RoHS non-compliance is acceptable or required
• Tube packaging preferred for smaller quantity orders or component organization
• REACH Unaffected regulatory status suitable for specific supply chain requirements

5413476-2 Selection Criteria:

• Applications operating at frequencies up to 1 GHz where the lower frequency rating is sufficient
• Designs requiring RoHS compliance certification
• REACH Affected regulatory status for European market applications
• Bulk packaging suitable for high-volume production runs
• Higher inventory availability (1828 pieces vs. 602 pieces)

Both parts maintain identical mechanical interface, electrical impedance, termination method, and operating temperature specifications. Selection between these parts depends on frequency requirement ceiling and regulatory compliance obligations rather than functional connector performance.

Frequently Asked Questions (FAQ)

Q: Can 5413476-2 be used in place of 413476-2 in all applications?

A: The 5413476-2 substitute is mechanically and electrically compatible for applications operating at frequencies up to 1 GHz. If your application requires frequencies between 1 GHz and 4 GHz, the 413476-2 is the required part. Both connectors maintain identical 50-ohm impedance, solder termination, and panel mount through-hole specifications.

Q: What is the difference between Tube and Bulk packaging?

A: Tube packaging (413476-2) contains 602 pieces per tube, suitable for component traceability and smaller quantity distribution. Bulk packaging (5413476-2) contains 1828 pieces, optimized for high-volume manufacturing environments. Both packaging formats contain identical connector components with no functional difference.

Q: Are there RoHS compliance implications when substituting between these parts?

A: Yes. The 413476-2 is RoHS non-compliant, while the 5413476-2 is RoHS compliant. If your design or supply chain requires RoHS certification, the 5413476-2 must be selected. If RoHS non-compliance is acceptable, either part functions identically.

Q: Does the frequency rating difference affect connector performance?

A: The frequency rating indicates the maximum operating frequency specification. The 413476-2 is rated to 4 GHz, while the 5413476-2 is rated to 1 GHz. Both connectors maintain 50-ohm impedance and identical mechanical characteristics across their respective frequency ranges. Selection depends on your application's frequency requirements.

Q: Are the solder termination specifications identical between these parts?

A: Yes. Both the 413476-2 and 5413476-2 feature identical solder contact termination and solder shield termination specifications. PCB pad layouts and soldering procedures are equivalent for both parts.

Q: What is the REACH Affected vs. REACH Unaffected distinction?

A: REACH Affected (5413476-2) indicates the part is subject to European REACH chemical regulations and requires compliance documentation. REACH Unaffected (413476-2) indicates the part is not subject to these specific regulations. Selection depends on your supply chain and market destination requirements.