TE Connectivity 413194-1 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 413194-1 is a BNC connector jack designed for 75-ohm coaxial RF applications. This female socket connector features right-angle panel mount configuration with through-hole solder termination and bulkhead mounting capability. The connector operates across a frequency range up to 2 GHz and is rated for 500 mating cycles. The product is currently active in the TE Connectivity AMP Connectors portfolio. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector specification, enabling direct functional replacement in PCB-based RF circuit designs.

Substiute Parts

413194-1

TE Connectivity AMP ConnectorsIn Stock: 1133413194-1 Datasheet

Current PartRFQ

5413194-1

TE Connectivity AMP ConnectorsIn Stock: 15995413194-1 Datasheet

DirectRFQ

5414459-1

TE Connectivity AMP ConnectorsIn Stock: 23005414459-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 413194-1 are identified based on strict electrical and mechanical parameter equivalence. The following parameters determine substitution eligibility:

Critical Matching Parameters:

• Connector Style: BNC
• Connector Type: Jack, Female Socket
• Impedance: 75 Ohms
• Mounting Type: Panel Mount, Through Hole, Right Angle
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 2 GHz
• Voltage Rating: 500 V
• Operating Temperature: -55°C ~ 85°C
• Mating Cycles: 500
• Center Contact Material: Beryllium Copper
• Body Material: Zinc
• Body Finish: Nickel
• Center Contact Plating: Gold
• Dielectric Material: Polymethylpentene (PMP)
• Fastening Type: Bayonet Lock
• Number of Ports: 1
• Features: Board Guide, Isolated
• Mounting Feature: Bulkhead - Front Side Nut

All identified substitute parts maintain complete parameter alignment with the main part across electrical performance, mechanical configuration, and material composition. Substitutes differ only in base product number designation and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

413194-1 (Main Part): This part is active and suitable for applications where RoHS non-compliance is acceptable. Current inventory is 1118 pieces.

5413194-1 (Direct Substitute): This part is functionally identical to the main part across all electrical and mechanical parameters. It carries RoHS Compliant certification, making it suitable for applications requiring RoHS compliance. Current inventory is 1497 pieces. Selection of this substitute is appropriate when regulatory requirements mandate RoHS compliance.

5414459-1 (Parametric Equivalent): This part maintains complete electrical and mechanical equivalence to the main part and carries ROHS3 Compliant certification, representing the highest level of RoHS compliance. Current inventory is 2250 pieces. Selection of this substitute is appropriate for applications requiring ROHS3 compliance or when maximum regulatory alignment is required.

All three parts share identical electrical performance characteristics, mechanical configuration, and material specifications. Selection between them is determined by regulatory compliance requirements and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can 5413194-1 be used as a direct replacement for 413194-1?

A: Yes. The 5413194-1 maintains complete electrical and mechanical equivalence to 413194-1 across all specified parameters including impedance, frequency response, voltage rating, operating temperature range, and physical mounting configuration. The primary difference is RoHS compliance status.

Q: What is the difference between 5413194-1 and 5414459-1?

A: Both parts are electrically and mechanically equivalent to 413194-1 and to each other. The difference lies in RoHS certification level: 5413194-1 carries RoHS Compliant certification, while 5414459-1 carries ROHS3 Compliant certification. All other specifications remain identical.

Q: Are these connectors suitable for 75-ohm RF applications?

A: Yes. All three parts are specified for 75-ohm impedance and operate at frequencies up to 2 GHz, making them suitable for standard 75-ohm coaxial RF circuit applications.

Q: What is the operating temperature range for these connectors?

A: All three parts operate across the temperature range of -55°C to 85°C, providing performance across industrial and commercial temperature environments.

Q: Can these connectors be used in applications requiring RoHS compliance?

A: The main part 413194-1 is RoHS non-compliant. For RoHS-compliant applications, use 5413194-1 (RoHS Compliant) or 5414459-1 (ROHS3 Compliant).

Q: What is the mating cycle rating for these connectors?

A: All three parts are rated for 500 mating cycles, indicating the expected number of connection and disconnection operations before performance degradation.

Q: Are the solder termination specifications identical across all three parts?

A: Yes. All three parts feature solder termination for both center contact and shield, with identical contact materials (Beryllium Copper), body materials (Zinc), and plating specifications (Gold center contact plating, Nickel body finish).

Q: What mounting configuration do these connectors use?

A: All three parts use panel mount, through-hole, right-angle configuration with bulkhead mounting capability via front-side nut fastening. The bayonet lock fastening type is consistent across all parts.