Bourns 4116R-2-102 Resistor Network Array - Equivalent & Substitute Parts

Part Overview

The Bourns 4116R-2-102 is a 15-resistor network array in 16-DIP packaging, featuring 1kΩ resistors with ±2% tolerance and 125mW power per element. This bussed resistor array is designed for through-hole mounting applications requiring integrated resistor networks. The part is currently active in production. Substitute parts are identified to address component availability, compliance requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

4116R-2-102

Bourns Inc.In Stock: 12654116R-2-102 Datasheet

Current PartRFQ

4116R-2-102LF

Bourns Inc.In Stock: 13224116R-2-102LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 4116R-2-102 is determined by strict equivalence across the following parameters:

• Resistance value: 1kΩ
• Tolerance: ±2%
• Number of resistors: 15
• Circuit configuration: Bussed
• Power per element: 125mW
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 125°C
• Package: 16-DIP (0.300", 7.62mm)
• Mounting type: Through Hole
• Pin count: 16
• Resistor-ratio-drift: 50ppm/°C

The identified substitute part maintains all electrical specifications and mechanical dimensions, with the primary distinction being RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the 4116R-2-102 and 4116R-2-102LF are active production parts from Bourns Inc. with identical electrical and mechanical specifications. Selection between these parts is determined by regulatory and compliance requirements:

• 4116R-2-102: Select for applications where RoHS non-compliant components are acceptable or required by design specifications.
• 4116R-2-102LF: Select for applications requiring ROHS3 compliance. The "LF" designation indicates lead-free construction, meeting RoHS3 requirements while maintaining all electrical performance parameters.

Both parts are REACH Affected and classified under ECCN EAR99. Inventory availability should be evaluated based on project timeline and supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Are the 4116R-2-102 and 4116R-2-102LF electrically interchangeable?

A: Yes. Both parts have identical electrical specifications including resistance value, tolerance, power rating, temperature coefficient, and operating temperature range. They are direct functional equivalents.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. The 4116R-2-102LF is ROHS3 compliant with lead-free construction, while the 4116R-2-102 is RoHS non-compliant. All other specifications are identical.

Q: Can I use the 4116R-2-102LF as a drop-in replacement for the 4116R-2-102?

A: Yes. Both parts share identical 16-DIP package dimensions, pin configuration, and electrical characteristics. No circuit modifications or PCB layout changes are required.

Q: Are there any performance differences between these parts?

A: No. Both parts maintain the same temperature coefficient (±100ppm/°C), resistor-ratio-drift (50ppm/°C), and operating temperature range (-55°C to 125°C).

Q: Which part should I specify for new designs?

A: Selection depends on your regulatory requirements. For applications requiring RoHS3 compliance, specify the 4116R-2-102LF. For applications without RoHS requirements, either part is acceptable based on availability.

Q: Are both parts currently in production?

A: Yes. Both the 4116R-2-102 and 4116R-2-102LF are active production parts from Bourns Inc.