TE Connectivity 406206-2 Modular Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 406206-2 is an 8p8c (RJ45) modular jack connector with right-angle orientation and shielded design for Cat5 Ethernet applications. This through-hole solder-terminated connector features EMI finger shielding and is designed for board-mounted installations requiring 90-degree cable entry. The part is currently active in production with 1108 units in stock inventory.

Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across connector type, contact configuration, mounting orientation, termination method, and shielding characteristics. Alternative part numbers may be required due to inventory availability, supply chain considerations, or specific manufacturing lot requirements.

Substiute Parts

406206-2

TE Connectivity AMP ConnectorsIn Stock: 1180406206-2 Datasheet

Current PartRFQ

5406206-2

TE Connectivity AMP ConnectorsIn Stock: 8875406206-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 406206-2 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Contact configuration: 8p8c (RJ45, Ethernet)
• Shielding type: Shielded with EMI finger
• Category rating: Cat5
• Contact material and finish: Phosphor Bronze with Gold plating (50.0µin minimum)

Mechanical Equivalence Requirements:

• Connector type: Jack
• Mounting type: Through Hole
• Orientation: 90° Angle (Right)
• Termination method: Solder
• Housing material: Polyamide (PA), Nylon
• Tab direction: Down
• Number of ports: 6

Compliance Requirements:

• RoHS compliance status
• Moisture Sensitivity Level: 1 (Unlimited)
• ECCN and HTSUS classifications

The substitute part 5406206-2 maintains full equivalence across all electrical, mechanical, and compliance parameters, with the addition of specified operating temperature range documentation.

Parameter Comparison

Engineering Selection Recommendations

Both the 406206-2 and 5406206-2 are active production parts manufactured by TE Connectivity AMP Connectors and maintain full electrical and mechanical equivalence for 8p8c modular jack connector applications.

Compliance Status: The 406206-2 carries RoHS Compliant certification, while the 5406206-2 carries ROHS3 Compliant certification. ROHS3 represents an updated compliance framework and is fully backward compatible with RoHS requirements. Both parts meet the same environmental and hazardous substance restrictions.

Operational Characteristics: The substitute part 5406206-2 provides documented operating temperature range of -40°C to 85°C. The main part 406206-2 does not specify operating temperature in the provided data. For applications requiring explicit temperature range documentation, the 5406206-2 provides this specification.

Inventory Considerations: The main part 406206-2 has 1108 units in current stock inventory. The substitute part 5406206-2 has 781 units available. Selection between these parts should be based on immediate availability requirements and supply chain lead time considerations.

Direct Substitution: The 5406206-2 is a direct functional substitute for the 406206-2 in all Cat5 Ethernet modular jack applications requiring through-hole solder termination with right-angle orientation and EMI shielding.

Frequently Asked Questions (FAQ)

Q: Can the 5406206-2 be used as a direct replacement for the 406206-2 in existing designs?

A: Yes. The 5406206-2 maintains identical electrical and mechanical specifications across all critical parameters including contact configuration, mounting type, orientation, termination method, and shielding characteristics. Both parts are manufactured by TE Connectivity AMP Connectors and are fully interchangeable for 8p8c modular jack applications.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: ROHS3 represents the updated Restriction of Hazardous Substances Directive (2011/65/EU as amended by 2015/863/EU). ROHS3 compliance includes all RoHS requirements plus additional restrictions on phthalates. Both certifications meet environmental and hazardous substance restrictions. ROHS3 is the current standard and is fully backward compatible with RoHS applications.

Q: Are both parts suitable for Cat5 Ethernet installations?

A: Yes. Both the 406206-2 and 5406206-2 are rated for Cat5 Ethernet applications. Both feature 8p8c (RJ45) contact configuration, shielded design with EMI finger, and phosphor bronze gold-plated contacts meeting Cat5 performance requirements.

Q: What is the significance of the 90° right-angle orientation?

A: The 90° right-angle (right) orientation indicates the connector is mounted perpendicular to the circuit board with the cable entry pointing to the right. This orientation is used in space-constrained applications where vertical board mounting is required. Both parts maintain identical right-angle orientation.

Q: Can these connectors be used in high-temperature environments?

A: The substitute part 5406206-2 specifies an operating temperature range of -40°C to 85°C. The main part 406206-2 does not provide operating temperature specification in the available data. For applications requiring operation outside standard room temperature ranges, the 5406206-2 provides documented thermal specifications.

Q: What does "EMI Finger" shielding mean?

A: EMI finger shielding refers to conductive fingers or contacts integrated into the connector housing that provide electromagnetic interference protection. These fingers make contact with the shielded cable or mating connector to establish a continuous ground path, reducing electromagnetic noise and crosstalk in high-speed data transmission applications.

Q: Are both parts RoHS compliant for export?

A: Yes. Both parts carry RoHS or ROHS3 compliance certification and are classified under ECCN EAR99, indicating they are not subject to export licensing requirements. Both parts are suitable for international distribution.

Q: What is the Moisture Sensitivity Level (MSL) 1 rating?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and does not require special moisture control during storage or handling. No baking or desiccant storage is required prior to assembly.

Q: How many ports does each connector provide?

A: Both the 406206-2 and 5406206-2 provide 6 ports in a single-row configuration. Each port accommodates an 8p8c (RJ45) modular jack connector.

Q: What is the contact finish thickness specification?

A: Both parts specify a gold contact finish thickness of 50.0µin (1.27µm). This thickness ensures adequate wear resistance and electrical conductivity for repeated mating cycles in Ethernet applications.