3LP01M-TL-E Equivalent & Substitute Parts

Part Overview

The 3LP01M-TL-E is a P-Channel MOSFET manufactured by onsemi, rated for 30V drain-to-source voltage with 100mA continuous drain current at 25°C. This device is packaged in SC-70/SOT-323 surface mount configuration and is designed for low-power switching applications requiring compact form factors.

The 3LP01M-TL-E has reached obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this component.

Substiute Parts

3LP01M-TL-E

onsemiIn Stock: 1001153LP01M-TL-E Datasheet

Current PartRFQ

BSS84LT1G

onsemiIn Stock: 272131BSS84LT1G Datasheet

SimilarRFQ

NX3008PBKW,115

Nexperia USA Inc.In Stock: 92542NX3008PBKW,115 Datasheet

SimilarRFQ

RSC002P03T316

Rohm SemiconductorIn Stock: 19182RSC002P03T316 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3LP01M-TL-E is determined by the following electrical and mechanical parameters:

Primary Substitution Criteria:

• FET Type: P-Channel MOSFET (Metal Oxide Semiconductor)
• Drain to Source Voltage (Vdss): Minimum 30V (equal or greater rating required)
• Continuous Drain Current (Id): Minimum 100mA at 25°C (equal or greater rating required)
• Power Dissipation: Minimum 150mW (equal or greater rating required)
• Mounting Type: Surface Mount
• Package Compatibility: SC-70, SOT-323, or equivalent compact surface mount packages

Secondary Compatibility Factors:

• Gate charge characteristics
• Input capacitance
• On-resistance (Rds On) performance
• Gate voltage rating (Vgs Max)
• Operating temperature range
• Moisture sensitivity level
• RoHS and REACH compliance status

Substitute parts must satisfy all primary criteria. Secondary factors influence performance optimization but do not disqualify a part from functional substitution.

Parameter Comparison

Engineering Selection Recommendations

RSC002P03T316 (Rohm Semiconductor)

The RSC002P03T316 is an active product with ROHS3 compliance. It meets all primary substitution criteria with a 30V Vdss rating, 250mA continuous drain current, and 200mW power dissipation. The SST3 package is mechanically compatible with SC-70/SOT-323 footprints. This part provides superior on-resistance performance (1.4 Ohm @ 250mA, 10V) and higher current capability, making it suitable for applications requiring enhanced performance margins. The ±20V gate voltage rating provides additional design flexibility.

NX3008PBKW,115 (Nexperia USA Inc.)

The NX3008PBKW,115 is an active product with ROHS3 compliance and AEC-Q101 automotive qualification. It maintains the 30V Vdss rating and SC-70/SOT-323 package compatibility. With 200mA continuous drain current and 260mW power dissipation (Ta), this part exceeds the minimum requirements of the 3LP01M-TL-E. The TrenchMOS™ series technology delivers improved on-resistance (4.1 Ohm @ 200mA, 4.5V) and lower gate charge (0.72 nC @ 4.5V). Extended operating temperature range (-55°C ~ 150°C) and automotive qualification support applications requiring higher reliability standards.

BSS84LT1G (onsemi)

The BSS84LT1G is an active product with extended operating temperature range (-55°C ~ 150°C). It exceeds the 30V Vdss requirement with a 50V rating and provides 130mA continuous drain current with 225mW power dissipation. The TO-236-3/SOT-23-3 package requires PCB layout modification compared to the SC-70/SOT-323 footprint. This part is suitable for applications where higher voltage margin and extended temperature operation are beneficial, though package migration is necessary.

Frequently Asked Questions (FAQ)

Q: Can the 3LP01M-TL-E be directly replaced with any of these substitute parts?

A: Direct replacement depends on PCB layout and package compatibility. The NX3008PBKW,115 and RSC002P03T316 maintain SC-70/SOT-323 package compatibility for direct footprint substitution. The BSS84LT1G uses a TO-236-3/SOT-23-3 package, requiring PCB layout modification. All three parts satisfy the electrical requirements for functional substitution.

Q: What is the primary difference between the substitute parts?

A: The RSC002P03T316 offers the highest current capability (250mA) and lowest on-resistance. The NX3008PBKW,115 provides automotive qualification and extended temperature range with TrenchMOS™ technology. The BSS84LT1G offers the highest voltage rating (50V) but requires package migration.

Q: Are all substitute parts RoHS compliant?

A: The RSC002P03T316 and NX3008PBKW,115 are explicitly ROHS3 compliant. RoHS status for the BSS84LT1G is not specified in the provided data.

Q: Which substitute part is best for high-temperature applications?

A: The NX3008PBKW,115 and BSS84LT1G both support extended operating temperature range (-55°C ~ 150°C) compared to the 3LP01M-TL-E (150°C maximum). The RSC002P03T316 maintains the same 150°C maximum operating temperature as the original part.

Q: Can I use a substitute part with higher voltage rating in a 30V application?

A: Yes. The BSS84LT1G with a 50V Vdss rating is electrically compatible with 30V applications. Higher voltage ratings provide additional design margin and do not compromise functionality in lower voltage circuits.

Q: What is the impact of package differences on circuit design?

A: The SC-70/SOT-323 package (3LP01M-TL-E, NX3008PBKW,115, RSC002P03T316) and TO-236-3/SOT-23-3 package (BSS84LT1G) have different pin configurations and PCB footprints. Parts with matching packages enable direct substitution without layout changes. Package migration requires PCB redesign and verification of thermal performance.

Q: Are there automotive-qualified alternatives?

A: The NX3008PBKW,115 carries AEC-Q101 automotive qualification. The RSC002P03T316 and BSS84LT1G do not specify automotive qualification in the provided data.