TE Connectivity AMP Connectors 3-917241-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 3-917241-8 is a rectangular connector housing designed for plug applications in the Dynamic D-3500 series. This component is a 20-position connector housing with 0.200" (5.08mm) pitch configuration, featuring a 2-row layout and panel mount installation. The part is classified as Active product status with full RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

3-917241-8

TE Connectivity AMP ConnectorsIn Stock: 9273-917241-8 Datasheet

Current PartRFQ

917241-8

TE Connectivity AMP ConnectorsIn Stock: 6106917241-8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity AMP Connectors 3-917241-8 is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish the substitution criteria:

Electrical Parameters:

• Connector Type: Plug
• Contact Type: Male Pin
• Number of Positions: 20
• Pitch: 0.200" (5.08mm)

Mechanical Parameters:

• Number of Rows: 2
• Row Spacing: 0.200" (5.08mm)
• Mounting Type: Panel Mount
• Contact Termination: Crimp
• Insulation Material: Thermoplastic, Polyester, Glass Filled

Environmental & Compliance Parameters:

• Operating Temperature Range: -55°C ~ 105°C
• RoHS Status: RoHS Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• Series: Dynamic D-3500

Substitute parts must match all parameters listed above to ensure functional and mechanical compatibility within the intended application circuit or assembly.

Parameter Comparison

Engineering Selection Recommendations

Both the primary part number 3-917241-8 and the substitute part number 917241-8 are classified as Active products from TE Connectivity AMP Connectors within the Dynamic D-3500 series. Both parts maintain full RoHS compliance and REACH unaffected status, meeting current regulatory requirements for electronic component manufacturing and distribution.

The substitute part 917241-8 demonstrates higher inventory availability with 6066 pieces in stock compared to 878 pieces for the primary part number 3-917241-8. Both parts are functionally and mechanically equivalent across all specified parameters, including electrical configuration, mechanical dimensions, termination method, and environmental operating specifications.

Selection between these equivalent parts should be based on inventory availability, lead time requirements, and supply chain considerations. Both parts are suitable for direct substitution in applications requiring a 20-position rectangular connector housing with 0.200" pitch, 2-row configuration, and panel mount installation in the Dynamic D-3500 series.

Frequently Asked Questions (FAQ)

Q: Are the part numbers 3-917241-8 and 917241-8 fully interchangeable?

A: Yes. Both part numbers are parametrically equivalent across all electrical, mechanical, and environmental specifications. They share identical connector type, position count, pitch, row configuration, mounting type, contact termination method, insulation material, and operating temperature range. Both maintain identical RoHS compliance and moisture sensitivity ratings.

Q: What is the significance of the different part number formats?

A: The part numbers 3-917241-8 and 917241-8 represent different manufacturer designations for the same connector housing within the Dynamic D-3500 series. The base product number 917241 is common to both variants. The numerical prefix or suffix variations do not indicate functional or mechanical differences.

Q: Can these connector housings be used in applications requiring different operating temperatures?

A: No. Both parts are rated for identical operating temperature ranges of -55°C to 105°C. Applications requiring different temperature specifications require alternative part numbers outside this series.

Q: Are contacts included with these connector housings?

A: No. Both part numbers are connector housings only. Contacts are not included and must be sourced separately as required for the specific application.

Q: What is the significance of the Moisture Sensitivity Level (MSL) rating of 1?

A: MSL 1 indicates unlimited moisture sensitivity, meaning these components have no moisture sensitivity restrictions and do not require special handling, storage, or baking procedures prior to assembly.

Q: Are there any restrictions on the use of these parts in regulated industries?

A: Both parts maintain RoHS compliance and REACH unaffected status. The ECCN classification is EAR99, indicating these components are not subject to export control restrictions. Compliance with specific industry regulations depends on the end-use application and should be verified independently.

Q: What termination method is required for these connector housings?

A: Both parts utilize crimp termination. Contacts must be crimped into the housing positions using appropriate crimping tools and techniques specified by TE Connectivity for the Dynamic D-3500 series.

Q: Can these 20-position housings be configured with different row spacing?

A: No. Both parts feature fixed 2-row configuration with 0.200" (5.08mm) row spacing. This dimension is not adjustable and is integral to the connector housing design.