TE Connectivity 3-794615-8 Rectangular Connector Plug Housing

Part Overview

The TE Connectivity 3-794615-8 is an 8-position rectangular connector plug housing from the Micro MATE-N-LOK series. This component serves as the housing assembly for male pin connectors in applications requiring panel-mount, snap-in connectivity with a 3.00mm pitch configuration. The part is classified as Active product status. Substitute parts are identified when inventory availability is limited, when alternative manufacturing batches are required, or when equivalent specifications from the same manufacturer series are needed to maintain supply chain continuity.

Substiute Parts

3-794615-8

TE Connectivity AMP ConnectorsIn Stock: 6563-794615-8 Datasheet

Current PartRFQ

794615-8

TE Connectivity AMP ConnectorsIn Stock: 5159794615-8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3-794615-8 is determined by strict equivalence across the following critical parameters:

• Connector Type: Must be Plug
• Number of Positions: Must be 8
• Pitch Configuration: Must be 0.118" (3.00mm)
• Number of Rows: Must be 2
• Row Spacing: Must be 0.118" (3.00mm)
• Mounting Type: Must be Panel Mount, Snap-In
• Contact Termination: Must be Crimp
• Fastening Type: Must be Locking Ramp
• Series: Must be Micro MATE-N-LOK
• Operating Temperature Range: Must be -40°C to 105°C

The substitute part 794615-8 meets all critical parameters and is therefore classified as a parametric equivalent. Both parts are manufactured by TE Connectivity AMP Connectors and share identical functional and mechanical specifications within the Micro MATE-N-LOK series.

Parameter Comparison

Engineering Selection Recommendations

Both the 3-794615-8 and 794615-8 are Active product status components manufactured by TE Connectivity AMP Connectors. The substitute part 794615-8 demonstrates full parametric equivalence across all critical mechanical and electrical specifications.

The insulation material specification for the substitute part (Polyamide PA66, Nylon 6/6) represents a refined material designation compared to the main part specification (Polyamide PA, Nylon). Both materials operate within the identical temperature range of -40°C to 105°C and maintain equivalent performance characteristics for this connector housing application.

The substitute part carries RoHS Compliant certification, which provides additional regulatory compliance assurance for applications subject to RoHS requirements. Both parts maintain identical Moisture Sensitivity Level (MSL) classification of 1 (Unlimited), indicating no special moisture handling requirements during storage or assembly.

Selection between these parts is based on inventory availability and regulatory compliance requirements of the end application. Both parts are suitable for direct substitution in Micro MATE-N-LOK series connector assemblies requiring 8-position, 3.00mm pitch plug housings with panel-mount snap-in configuration.

Frequently Asked Questions (FAQ)

Q: Can the 794615-8 substitute directly for the 3-794615-8 in existing designs?

A: Yes. The 794615-8 is a parametric equivalent with identical connector type, position count, pitch, row configuration, mounting type, contact termination, and fastening specifications. Both parts are from the Micro MATE-N-LOK series and operate within the same temperature range.

Q: What is the difference in insulation material between the two parts?

A: The main part specifies Polyamide (PA), Nylon, while the substitute specifies Polyamide (PA66), Nylon 6/6. PA66 (Nylon 6/6) is a specific formulation of polyamide that maintains equivalent performance within the -40°C to 105°C operating range. Both materials are suitable for this connector housing application.

Q: Does the RoHS Compliant status of the substitute part affect compatibility?

A: No. RoHS compliance is an additional regulatory certification that does not affect mechanical or electrical compatibility. The substitute part's RoHS Compliant status provides enhanced regulatory alignment for applications subject to RoHS requirements.

Q: Are contacts included with either part?

A: No. Both the 3-794615-8 and 794615-8 are connector housings only. Contacts are not included and must be sourced separately.

Q: What is the significance of the Moisture Sensitivity Level (MSL) rating?

A: Both parts carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions. These parts do not require special moisture-controlled storage or handling procedures during manufacturing or assembly.

Q: Can these parts be used interchangeably in the same assembly?

A: Yes. Both parts meet identical specifications for the Micro MATE-N-LOK series 8-position, 3.00mm pitch plug housing configuration. They are mechanically and functionally interchangeable.

Q: What mounting configurations are supported?

A: Both parts support Panel Mount and Snap-In mounting types, allowing installation directly onto circuit board panels with snap-fit engagement.