Winchester Interconnect 364M095 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The Winchester Interconnect 364M095 is a BNC connector jack designed for RF coaxial applications requiring 50-ohm impedance. This female socket connector features right-angle through-hole mounting with solder termination for both center contact and shield. The part is currently active in production with 1001 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative manufacturers are preferred for supply chain diversification, or when specific compliance certifications are required for particular applications.

Key Parameters

Parameter	Value
Connector Style	BNC
Connector Type	Jack, Female Socket
Impedance	50 Ohms
Mounting Type	Through Hole, Right Angle
Contact Termination	Solder
Shield Termination	Solder
Fastening Type	Bayonet Lock
Frequency - Max	4 GHz
Number of Ports	1
Voltage Rating	500 V
Mating Cycles	500

Substitute Part Grouping Explanation

Substitution eligibility for the Winchester Interconnect 364M095 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Style: BNC
Connector Type: Jack, Female Socket
Impedance: 50 Ohms
Mounting Type: Through Hole, Right Angle
Contact Termination: Solder
Shield Termination: Solder
Fastening Type: Bayonet Lock
Frequency - Max: 4 GHz
Number of Ports: 1
Voltage Rating: 500 V

All five substitute parts listed below meet these mandatory parameters and are therefore electrically and mechanically compatible with the 364M095 for PCB-mounted RF applications requiring 50-ohm coaxial connectivity.

Parameter Comparison

Parameter	364M095 (Winchester)	413631-2 (TE Connectivity)	414373-1 (TE Connectivity)	4788 (Pomona)	5413631-1 (TE Connectivity)	85_BNC-50-0-1/133_NE (Huber+Suhner)
Connector Style	BNC	BNC	BNC	BNC	BNC	BNC
Connector Type	Jack, Female Socket	Jack, Female Socket	Jack, Female Socket	Jack, Female Socket	Jack, Female Socket	Jack, Female Socket
Impedance	50 Ohms	50 Ohms	50 Ohms	50 Ohms	50 Ohms	50 Ohms
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Contact Termination	Solder	Solder	Solder	Solder	Solder	Solder
Shield Termination	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Bayonet Lock	Bayonet Lock	Bayonet Lock	Bayonet Lock	Bayonet Lock	Bayonet Lock
Frequency - Max	4 GHz	4 GHz	4 GHz	4 GHz	4 GHz	4 GHz
Number of Ports	1	1	1	1	1	1
Voltage Rating	500 V	500 V	500 V	500 V	500 V	500 V
Mating Cycles	500	500	500	Not specified	500	500
Housing Color	Silver	Silver	Silver	Silver	Silver	Silver
Center Contact Plating	Gold	Gold	Gold	Gold	Gold	Gold
Product Status	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All substitute parts are active products with current manufacturing status. Selection among the available equivalents should be based on the following considerations:

Compliance Requirements:

Pomona Electronics 4788 carries ROHS3 compliance and REACH Unaffected status, suitable for applications with strict environmental compliance mandates.
TE Connectivity 5413631-1 carries ROHS3 compliance and REACH Affected status, appropriate for regulated markets requiring full compliance documentation.
Huber+Suhner 85_BNC-50-0-1/133_NE carries ROHS3 compliance and REACH Unaffected status.
TE Connectivity 413631-2 and 414373-1 have undefined or non-compliant status and should be evaluated against specific application requirements.

Operating Temperature Range:

Pomona Electronics 4788 and Huber+Suhner 85_BNC-50-0-1/133_NE support -65°C to 165°C, matching the Winchester 364M095 range.
TE Connectivity parts (413631-2, 414373-1, 5413631-1) support -55°C to 85°C, a narrower range suitable for standard industrial applications.

Inventory Availability:

TE Connectivity 5413631-1: 2230 units
Pomona Electronics 4788: 1047 units
TE Connectivity 414373-1: 881 units
Huber+Suhner 85_BNC-50-0-1/133_NE: 870 units
TE Connectivity 413631-2: 727 units

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitute parts as a direct replacement for the Winchester 364M095?

A: Yes. All five substitute parts meet the mandatory electrical and mechanical parameters: BNC connector style, female jack configuration, 50-ohm impedance, through-hole right-angle mounting, solder termination, bayonet fastening, 4 GHz maximum frequency, and 500 V voltage rating. They are electrically and mechanically interchangeable for PCB assembly.

Q: What are the differences between these substitute parts?

A: The primary differences lie in material composition, operating temperature range, compliance certifications, and dielectric materials. The Winchester 364M095 uses brass body with PTFE dielectric and operates from -40°C to 165°C. TE Connectivity parts use zinc bodies with either PTFE or PMP dielectrics and operate from -55°C to 85°C. Pomona 4788 uses brass body with PTFE and operates from -65°C to 165°C. Huber+Suhner uses brass body with PFA/PTFE dielectrics and operates from -65°C to 165°C.

Q: Which substitute should I choose if my application requires extended temperature operation?

A: For applications requiring the full -40°C to 165°C range of the original part, select either Pomona Electronics 4788 (-65°C to 165°C) or Huber+Suhner 85_BNC-50-0-1/133_NE (-65°C to 165°C). TE Connectivity parts are limited to -55°C to 85°C.

Q: Are there RoHS compliance differences I should consider?

A: Yes. Pomona 4788 is ROHS3 compliant with REACH Unaffected status. TE Connectivity 5413631-1 is ROHS3 compliant with REACH Affected status. TE Connectivity 413631-2 and 414373-1 have undefined or non-compliant status. Huber+Suhner 85_BNC-50-0-1/133_NE is ROHS3 compliant with REACH Unaffected status. Select based on your regulatory requirements.

Q: Do all parts have the same insertion loss specification?

A: The Winchester 364M095 specifies 0.20 dB insertion loss. Insertion loss data is not provided for the substitute parts in the available documentation. For applications where insertion loss is critical, contact the manufacturer for detailed specifications.

Q: What is the difference between the TE Connectivity part numbers 413631-2, 5413631-1, and 414373-1?

A: These parts differ in center contact material (beryllium copper versus phosphor bronze), body material composition (zinc), body finish (tin-lead versus nickel), and dielectric material (PTFE versus PMP). All three maintain the same electrical specifications and are functionally equivalent for the 50-ohm BNC application.

Q: Can I mix these parts in the same assembly?

A: Yes. All parts are electrically and mechanically equivalent and can be used interchangeably within the same PCB assembly. However, for consistency in manufacturing records and traceability, it is standard practice to use a single part number per assembly revision.

Q: Which part has the highest inventory availability?

A: TE Connectivity 5413631-1 has the highest inventory with 2230 units in stock, followed by Pomona 4788 with 1047 units.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message