3M 3626-6000 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The 3M 3626-6000 is a 24-position rectangular receptacle connector designed for IDC (Insulation Displacement Contact) termination with ribbon cable. This connector features gold-plated contacts rated for 26-28 AWG wire gauges and is configured as a feed-through receptacle in a dual-row arrangement with 0.100" pitch spacing. The part is actively manufactured and RoHS compliant, making it suitable for applications requiring reliable ribbon cable interconnection in industrial and commercial equipment.

Equivalent and substitute parts are identified when design requirements change, inventory constraints occur, or when alternative manufacturers offer compatible solutions meeting the same electrical and mechanical specifications.

Substiute Parts

3626-6000

3MIn Stock: 12813626-6000 Datasheet

Current PartRFQ

D89124-0031HK

3MIn Stock: 2086D89124-0031HK Datasheet

MFR RecommendedRFQ

SFH213-PPPC-D12-ID-BK

Sullins Connector SolutionsIn Stock: 2377SFH213-PPPC-D12-ID-BK Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 3626-6000 is determined by the following critical parameters:

• Connector Type: Must be Receptacle to maintain mating compatibility with existing header connectors
• Number of Positions: Must be 24 to ensure pin-count compatibility
• Pitch and Row Configuration: Must maintain 0.100" (2.54mm) pitch and 2-row arrangement for mechanical fit
• Cable Termination Method: Must support IDC termination for ribbon cable compatibility
• Wire Gauge Compatibility: Must accommodate 26-28 AWG wire range
• Contact Finish: Gold plating required for electrical performance and corrosion resistance

Two substitute parts meet these criteria:

D89124-0031HK (3M manufacturer) - Maintains identical electrical and mechanical specifications within the 3M product portfolio, offering an alternative series designation.

SFH213-PPPC-D12-ID-BK (Sullins Connector Solutions) - Provides cross-manufacturer compatibility with equivalent functional parameters, though configured as a header connector type rather than receptacle, requiring verification of mating interface requirements.

Parameter Comparison

Engineering Selection Recommendations

D89124-0031HK is the primary substitute within the 3M product family. Both parts maintain identical connector type, position count, pitch, and row configuration. The difference in contact finish thickness (15.0µin versus 30.0µin) represents a variation within acceptable gold plating specifications for IDC receptacles. Both parts carry RoHS compliance and unlimited moisture sensitivity ratings, ensuring equivalent environmental performance.

SFH213-PPPC-D12-ID-BK from Sullins Connector Solutions provides cross-manufacturer substitution with equivalent mechanical and electrical parameters. The connector type designation as "Header" rather than "Receptacle" requires circuit board layout verification to confirm mating compatibility with existing receptacle connectors. The wire gauge specification of 28 AWG (versus 26-28 AWG range) represents a narrower specification within the acceptable range. Additional features including polarizing key and strain relief provide enhanced mechanical robustness. ROHS3 compliance exceeds the RoHS requirement of the main part.

Selection between substitutes depends on supply chain requirements, existing inventory constraints, and circuit board design compatibility with header versus receptacle connector types.

Frequently Asked Questions (FAQ)

Q: Can D89124-0031HK be used as a direct replacement for 3626-6000?

A: Yes. Both parts are 3M-manufactured 24-position receptacles with identical pitch, row configuration, and IDC termination specifications. The contact finish thickness difference does not affect functional compatibility for standard ribbon cable applications.

Q: What is the key difference between the 3626-6000 and SFH213-PPPC-D12-ID-BK?

A: The primary difference is connector type designation: 3626-6000 is a receptacle, while SFH213-PPPC-D12-ID-BK is a header. Both maintain 24-position, 0.100" pitch, dual-row configuration with IDC termination. Mating compatibility depends on the corresponding connector type in the circuit design.

Q: Does the contact finish thickness difference between 3626-6000 and D89124-0031HK affect performance?

A: Both contact finish thicknesses (30.0µin and 15.0µin) fall within acceptable gold plating specifications for IDC connectors. The difference does not impact electrical conductivity or corrosion resistance for standard operating conditions.

Q: Is the 28 AWG specification of SFH213-PPPC-D12-ID-BK compatible with 26-28 AWG ribbon cable?

A: The SFH213-PPPC-D12-ID-BK is rated for 28 AWG wire gauge. The 3626-6000 accommodates the broader 26-28 AWG range. For applications using 26 AWG ribbon cable, the narrower specification of the Sullins part requires verification of IDC contact force compatibility.

Q: What is the packaging difference between these parts?

A: The 3626-6000 and D89124-0031HK are supplied in Bulk packaging. The SFH213-PPPC-D12-ID-BK is supplied in Tray packaging. Packaging format may affect handling, storage, and integration into assembly processes.

Q: Are all three parts RoHS compliant?

A: Yes. The 3626-6000 and D89124-0031HK carry RoHS Compliant status. The SFH213-PPPC-D12-ID-BK carries ROHS3 Compliant status, which represents an enhanced compliance standard. All three parts are REACH Unaffected.