35HDBAUSPKG Equivalent & Substitute Parts

Part Overview

The 35HDBAUSPKG is a 4.6mm stereo phone plug connector manufactured by Switchcraft Inc., designed for headphone and audio applications. This male connector features three conductors (TRS configuration) with solder termination and free-hanging in-line mounting. The part is currently active in production with 1000 units in stock. Alternative part numbers may be required due to packaging preferences, inventory availability, or specific application requirements while maintaining identical electrical and mechanical compatibility.

Substiute Parts

35HDBAUSPKG

Switchcraft Inc.In Stock: 110435HDBAUSPKG Datasheet

Current PartRFQ

35HDBAUS

Switchcraft Inc.In Stock: 128135HDBAUS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 35HDBAUS serves as a direct substitute for the 35HDBAUSPKG based on the following critical parameters:

Matching Electrical Characteristics:

• Identical mating diameter: 4.60mm (0.141", 1/8", Mini Plug)
• Identical signal configuration: Stereo (3 Conductor, TRS)
• Identical connector type: Phone Plug, Male gender
• Identical number of contacts: 3 Conductors, 3 Contacts
• Identical termination method: Solder
• Identical mounting type: Free Hanging (In-Line)
• Identical shielding: Unshielded

Matching Mechanical Characteristics:

• Identical body material: Brass
• Identical housing material: Brass
• Identical actual diameter: 0.138" (4.60mm)
• Identical package contents: 3 pcs (1 Connector, 1 Handle, 1 Insulator Tube)

Compliance Equivalence:

• Both ROHS3 Compliant
• Both REACH Unaffected
• Both classified under ECCN: EAR99
• Both assigned HTSUS: 8536.69.8000

The primary difference is packaging format: 35HDBAUSPKG uses standard packaging while 35HDBAUS uses bulk packaging. This distinction does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 35HDBAUSPKG and 35HDBAUS are active production parts from Switchcraft Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability:

35HDBAUSPKG is appropriate when standard packaging is required for distribution, retail, or applications where individual connector packaging is preferred.

35HDBAUS is appropriate when bulk packaging is acceptable, offering higher inventory availability (1183 units versus 1000 units) and potential cost efficiency for high-volume applications.

Both parts maintain full ROHS3 compliance and REACH compliance status, ensuring regulatory equivalence for all applications. The identical connector specifications, contact configuration, and termination method guarantee direct functional interchangeability in 4.6mm stereo audio applications.

Frequently Asked Questions (FAQ)

Q: Can 35HDBAUS be used as a direct replacement for 35HDBAUSPKG?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (standard versus bulk). They are functionally interchangeable in all applications requiring a 4.6mm stereo phone plug connector with solder termination.

Q: What determines compatibility between these two part numbers?

A: Compatibility is determined by matching specifications in mating diameter (4.60mm), signal configuration (Stereo TRS, 3 Conductor), connector type (Phone Plug, Male), number of contacts (3), termination method (Solder), mounting type (Free Hanging In-Line), and body material (Brass). Both parts meet these criteria identically.

Q: Are there any electrical performance differences between 35HDBAUSPKG and 35HDBAUS?

A: No electrical performance differences exist. Both connectors are rated for identical operating conditions and comply with the same regulatory standards (ROHS3, REACH, EAR99).

Q: What is the significance of the packaging difference?

A: The packaging difference reflects distribution format only. 35HDBAUSPKG uses standard packaging suitable for individual or small-quantity distribution. 35HDBAUS uses bulk packaging for high-volume orders. The connector itself is identical in both cases.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on procurement requirements: choose 35HDBAUSPKG for standard packaging needs or 35HDBAUS for bulk packaging applications. Both maintain active production status and full compliance certification.