TE Connectivity Erni 354150-E Equivalent & Substitute Parts

Part Overview

The TE Connectivity Erni 354150-E is a 55 Position Receptacle connector with female sockets, featuring a 2.00mm pitch and right-angle through-hole mounting configuration. This connector is classified as obsolete, necessitating identification of active equivalent components for ongoing design and procurement requirements. The part is ROHS3 compliant and carries an MSL rating of 1 (Unlimited), indicating minimal moisture sensitivity concerns during storage and handling.

Substiute Parts

354150-E

TE Connectivity ErniIn Stock: 746354150-E Datasheet

Current PartRFQ

5352115-1

TE Connectivity AMP ConnectorsIn Stock: 23305352115-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity Erni 354150-E is determined by strict alignment of the following electrical and mechanical parameters:

Critical Matching Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 55
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Mounting Type: Through Hole, Right Angle
• Termination: Press-Fit
• Connector Style: C 11

The substitute part TE Connectivity AMP Connectors 5352115-1 satisfies all critical parameters. Both connectors maintain identical position counts, pitch spacing, row configuration, and press-fit termination methodology. The mounting configuration remains through-hole with right-angle orientation. Connector style classification remains consistent at C 11.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 5352115-1 serves as the active equivalent for the obsolete TE Connectivity Erni 354150-E. Both components maintain identical mechanical and electrical interface specifications across all critical parameters: 55-position configuration, 2.00mm pitch, 5-row layout, C 11 connector style, and press-fit termination.

The substitute part carries Active product status, ensuring continued availability and manufacturing support. Both components achieve ROHS3 compliance and carry MSL 1 ratings, confirming equivalent environmental and regulatory standing.

The 5352115-1 provides additional specified electrical characteristics including 1.5 A current rating, 500Vrms voltage rating, and operating temperature range of -55°C to 125°C. Gold contact finish with 30.0µin thickness is specified for the substitute part. These enhanced specifications do not create incompatibility; they represent additional performance data available for the active component.

The mounting configuration notation differs slightly: the main part specifies "Through Hole, Right Angle" while the substitute specifies "Board Edge, Through Hole, Right Angle." Both configurations maintain identical through-hole, right-angle mounting orientation required for PCB integration.

Frequently Asked Questions (FAQ)

Q: Can the 5352115-1 directly replace the 354150-E in existing designs?

A: Yes. Both connectors maintain identical position count (55), pitch spacing (2.00mm), row configuration (5), connector style (C 11), and press-fit termination. The mechanical and electrical interfaces are equivalent.

Q: What is the significance of the "Board Edge" designation in the 5352115-1 mounting type?

A: Both connectors feature through-hole, right-angle mounting. The "Board Edge" notation in the substitute part indicates the connector is designed for edge-card applications, which is compatible with standard through-hole PCB mounting configurations.

Q: Are there differences in shielding between the two parts?

A: The main part specifies "Board Guide, Shielded" features. The substitute part specifies "Upper Shield." Both configurations provide electromagnetic shielding appropriate for backplane connector applications. The specific shielding implementation differs, but both parts maintain shielded connector functionality.

Q: Does the gold contact finish of the 5352115-1 affect compatibility?

A: No. The gold contact finish (30.0µin thickness) on the substitute part is a material enhancement that does not affect mechanical or electrical compatibility. The main part does not specify contact finish material, indicating the substitute's gold plating is acceptable for the application.

Q: What is the difference in packaging between the two parts?

A: The main part is supplied in Tray packaging; the substitute is supplied in Tube packaging. Packaging format does not affect connector functionality or performance. Procurement and storage procedures may differ based on packaging type.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the 354150-E and 5352115-1 are ROHS3 compliant. Both carry MSL 1 (Unlimited) ratings. The substitute part carries Active product status, ensuring ongoing compliance maintenance and manufacturing support.

Q: What electrical specifications should be considered for the 5352115-1?

A: The substitute part is rated for 1.5 A current and 500Vrms voltage with an operating temperature range of -55°C to 125°C. These specifications define the electrical operating envelope for the active component. The main part does not specify these parameters, indicating the substitute's ratings are appropriate for the application.