TE Connectivity Erni 354145 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Erni 354145 is a 95-position receptacle connector with female sockets, designed for backplane applications. This connector features a 2.00mm pitch, right-angle mounting configuration, and press-fit termination for through-hole installation. The part is classified as obsolete, necessitating identification of active equivalent components to maintain design continuity and ensure ongoing component availability for production and field service applications.

Substiute Parts

354145

TE Connectivity ErniIn Stock: 1168354145 Datasheet

Current PartRFQ

5352009-1

TE Connectivity AMP ConnectorsIn Stock: 9325352009-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity Erni 354145 is based on electrical and mechanical parameter alignment within the backplane connector category. The primary substitute, TE Connectivity AMP Connectors 5352009-1, maintains functional equivalence through the following critical parameters:

Matching Parameters:

• Connector type: Receptacle, Female Sockets
• Position count: 95 positions
• Pitch specification: 0.079" (2.00mm)
• Row configuration: 5 rows
• Termination method: Press-Fit
• Mounting orientation: Through Hole, Right Angle
• Operating temperature range: -55°C ~ 125°C
• RoHS3 compliance status
• Moisture sensitivity level: 1 (Unlimited)

The substitute part 5352009-1 is classified as active product status, providing long-term availability and supply chain continuity compared to the obsolete 354145.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 5352009-1 serves as the primary equivalent for the obsolete TE Connectivity Erni 354145. Selection of this substitute is supported by the following engineering criteria:

Product Status Alignment: The 5352009-1 maintains active product status, ensuring continued availability, manufacturing support, and compliance with current industry standards. The 354145 obsolete classification creates supply chain risk and limits access to technical support.

Compliance Certification: Both components maintain ROHS3 compliance and MSL Level 1 rating, confirming compatibility with current manufacturing and environmental regulations. The 5352009-1 provides specified electrical ratings (1.5 A current, 500Vrms voltage) that establish performance boundaries for circuit design applications.

Mechanical and Electrical Equivalence: Identical position count, pitch specification, row configuration, and termination method ensure direct functional replacement in backplane connector applications. Matching operating temperature range (-55°C ~ 125°C) confirms thermal performance equivalence across industrial and commercial operating environments.

Series Classification: The 5352009-1 belongs to the Z-PACK series and is designated for daughtercard connector applications, positioning it within the active TE Connectivity AMP Connectors portfolio for ongoing design support and component traceability.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity AMP 5352009-1 directly replace the TE Connectivity Erni 354145 in existing designs?

A: Yes. Both connectors share identical position count (95), pitch (2.00mm), row configuration (5), termination method (press-fit), and operating temperature range (-55°C ~ 125°C). The connector style designation (B 19) is identical for both parts. Direct mechanical and electrical substitution is supported by these matching parameters.

Q: What is the primary difference between these two connectors?

A: The 354145 is classified as obsolete, while the 5352009-1 is active product. The 5352009-1 provides specified electrical performance ratings (1.5 A current, 500Vrms voltage) and belongs to the Z-PACK series. The mounting designation includes "Board Edge" specification for the 5352009-1, whereas the 354145 specifies standard through-hole mounting.

Q: Are both connectors RoHS compliant?

A: Yes. Both the 354145 and 5352009-1 maintain ROHS3 compliance status, confirming compatibility with current environmental and regulatory requirements.

Q: What is the moisture sensitivity level for these connectors?

A: Both connectors are rated at MSL Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or manufacturing processes.

Q: Does the 5352009-1 provide electrical performance specifications?

A: Yes. The 5352009-1 specifies a current rating of 1.5 A and voltage rating of 500Vrms. The 354145 does not provide these electrical specifications in the available documentation.

Q: What is the packaging configuration for the substitute part?

A: The 5352009-1 is supplied in bulk packaging, consistent with standard backplane connector distribution for production environments.

Q: Are there any temperature operating limitations for these connectors?

A: Both connectors operate across the identical temperature range of -55°C ~ 125°C, confirming thermal performance equivalence for industrial and commercial applications.