352016RJT Equivalent & Substitute Parts

Part Overview

The 352016RJT is a 16 Ohms ±5% 1W thick film chip resistor manufactured by TE Connectivity Passive Product in the 2512 (6432 Metric) package format. This component is classified as Active product status and is supplied in Tape & Reel packaging. The 352016RJT serves as a general-purpose SMD resistor for applications requiring moderate power dissipation in compact form factors. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity across multiple manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

352016RJT

TE Connectivity Passive ProductIn Stock: 1206352016RJT Datasheet

Current PartRFQ

ERJ-1TYJ160U

Panasonic Electronic ComponentsIn Stock: 8356ERJ-1TYJ160U Datasheet

DirectRFQ

RMCF2512JT16R0

Stackpole Electronics IncIn Stock: 7906RMCF2512JT16R0 Datasheet

DirectRFQ

CRM2512-JW-160ELF

Bourns Inc.In Stock: 4289CRM2512-JW-160ELF Datasheet

UpgradeRFQ

CRCW251216R0JNEG

Vishay DaleIn Stock: 5149CRCW251216R0JNEG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 352016RJT is determined by strict equivalence across the following critical parameters: resistance value (16 Ohms), tolerance (±5%), power rating (1W), package format (2512), composition (thick film), temperature coefficient (±200ppm/°C), and termination count (2). All substitute parts listed maintain these core electrical and mechanical specifications, ensuring direct functional replacement without circuit redesign.

The substitute parts are categorized as follows:

Direct Equivalents (1W Rating): Parts maintaining identical 1W power rating with matching electrical characteristics and 2512 package dimensions.

Upgrade Option (2W Rating): CRM2512-JW-160ELF provides increased power handling capability while maintaining all other core parameters, suitable for applications requiring thermal margin or higher current capacity.

Substitution compatibility is further validated through compliance certifications (RoHS3, REACH status), moisture sensitivity ratings (MSL 1), and operating temperature ranges. Automotive-qualified variants (AEC-Q200) are identified where applicable, enabling use in regulated environments.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Direct 1W Equivalents):

ERJ-1TYJ160U, RMCF2512JT16R0, and CRCW251216R0JNEG are electrically and mechanically equivalent to the 352016RJT. All three maintain identical resistance, tolerance, power rating, package dimensions, and thermal characteristics. Selection among these direct equivalents is based on product status and application requirements:

RMCF2512JT16R0 (Stackpole Electronics) and CRCW251216R0JNEG (Vishay Dale) are both Active product status, supporting long-term design continuity and procurement stability. Both include AEC-Q200 automotive qualification, enabling deployment in regulated automotive applications.

ERJ-1TYJ160U (Panasonic) carries Not For New Designs status, limiting its application to legacy system support or existing design maintenance only.

Upgrade Option (2W Power Rating):

CRM2512-JW-160ELF (Bourns Inc.) provides increased power dissipation capability at 2W while maintaining all other core electrical parameters. This component is suitable for applications where thermal margin is required or where current-sense functionality is specified. The upgrade is mechanically compatible within the 2512 package envelope, though height increases from 0.70mm to 0.80mm maximum seated height.

Compliance Considerations:

All substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, ensuring compatibility with standard manufacturing and storage environments. Operating temperature ranges extend to 155°C for all substitutes except the main part (125°C), providing additional thermal margin in high-temperature applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-1TYJ160U replace 352016RJT in new designs?

A: ERJ-1TYJ160U carries Not For New Designs product status and is not recommended for new circuit implementations. Use RMCF2512JT16R0 or CRCW251216R0JNEG for new designs requiring equivalent 1W, 16 Ohm specifications.

Q: What is the difference between 1W and 2W rated substitutes?

A: CRM2512-JW-160ELF provides 2W power rating compared to 1W for the main part and other direct equivalents. This upgrade enables higher current handling and thermal dissipation. The 2W component has a maximum seated height of 0.80mm versus 0.70mm for 1W variants, which must be verified against PCB layout constraints.

Q: Are automotive-qualified versions available?

A: Yes. RMCF2512JT16R0 (Stackpole) and CRCW251216R0JNEG (Vishay Dale) both carry AEC-Q200 automotive qualification, enabling use in automotive applications requiring this certification.

Q: Do all substitutes maintain the same operating temperature range?

A: The main part 352016RJT operates from -55°C to 125°C. All substitute parts extend the upper limit to 155°C, providing additional thermal margin. This extended range does not affect compatibility in applications within the original -55°C to 125°C specification.

Q: Are there dimensional differences between substitute parts?

A: All parts use the 2512 (6432 Metric) package. Minor dimensional variations exist: length ranges from 0.248" to 0.252" (6.30mm to 6.40mm), and width ranges from 0.122" to 0.126" (3.10mm to 3.20mm). Maximum seated heights are 0.028" (0.70mm) for 1W variants and 0.031" (0.80mm) for the 2W upgrade. These variations remain within standard 2512 package tolerances and do not affect PCB footprint compatibility.

Q: What is the moisture sensitivity level for all parts?

A: All parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard storage and handling procedures apply without special desiccant or humidity control requirements.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant, meeting environmental and regulatory requirements for restricted substance use.