TE Connectivity 350782-1 Rectangular Connector Housing – Equivalent & Substitute Parts

Part Overview

The TE Connectivity 350782-1 is a 9-position receptacle housing for the Universal MATE-N-LOK connector series. This rectangular connector housing is designed for panel mount, snap-in applications with crimp contact termination and locking ramp fastening. The part is currently active in production with 1963 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required for applications where the primary part number is unavailable or when inventory constraints necessitate alternative sourcing.

Substiute Parts

350782-1

TE Connectivity AMP ConnectorsIn Stock: 1977350782-1 Datasheet

Current PartRFQ

1-480707-0

TE Connectivity AMP ConnectorsIn Stock: 20031-480707-0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 350782-1 are identified based on strict equivalence across the following critical parameters:

• Connector Type: Receptacle housing configuration
• Position Count: 9 positions
• Row Configuration: 3 rows with 0.250" (6.35mm) row spacing
• Mounting Interface: Panel mount with snap-in capability
• Contact System: Crimp termination with locking ramp fastening
• Material Composition: Polyamide (PA) nylon insulation
• Thermal Performance: -55°C to 105°C operating range
• Series Compatibility: Universal MATE-N-LOK series

All substitute parts listed maintain identical electrical and mechanical specifications within these parameters, ensuring direct functional equivalence for applications requiring 9-position rectangular connector housings in the MATE-N-LOK series.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 350782-1 and 1-480707-0 are active production parts with full regulatory compliance. The 350782-1 carries RoHS Compliant certification, while the 1-480707-0 carries ROHS3 Compliant certification. Both parts maintain identical electrical and mechanical specifications and are classified under the same ECCN (EAR99) and HTSUS code (8538.90.6000).

Selection between these parts should be based on:

• Inventory Availability: The 350782-1 has 1963 units in stock; the 1-480707-0 has 1900 units in stock
• Regulatory Requirements: Confirm whether RoHS or ROHS3 compliance is required for the application
• Supply Chain Continuity: Both parts are active and available for procurement

No technical performance differentiation exists between these parts for standard rectangular connector housing applications within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Are the 350782-1 and 1-480707-0 directly interchangeable?

A: Yes. Both parts are 9-position receptacle housings in the Universal MATE-N-LOK series with identical row spacing (0.250"), mounting configuration (panel mount, snap-in), contact termination (crimp), and fastening type (locking ramp). They operate across the same temperature range (-55°C to 105°C) and use identical insulation material (polyamide nylon).

Q: What is the difference between RoHS and ROHS3 compliance?

A: Both certifications indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the current version of the directive. Both parts meet hazardous substance restrictions and are suitable for applications requiring RoHS compliance.

Q: Do these housings include contacts?

A: No. Both the 350782-1 and 1-480707-0 are housings only. Contacts are not included and must be sourced separately. Ensure selected contacts are compatible with crimp termination and the 9-position, 3-row configuration.

Q: What mounting applications are supported?

A: Both housings support panel mount applications with snap-in installation. The locking ramp fastening type provides secure mating with compatible plug connectors in the MATE-N-LOK series.

Q: Are there any moisture sensitivity concerns?

A: Both parts carry Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without special moisture control measures during storage or handling.

Q: What is the row spacing specification?

A: Row spacing is 0.250 inches (6.35 millimeters) for both parts. This specification is critical for ensuring compatibility with mating connector plugs and PCB layout design.