33TS3010NF-88B

Part Overview

The 33TS3010NF-88B is an active modular connector (jack) manufactured by Amphenol CONEC. This 8p8c (RJ45, Ethernet) connector features a 90° right angle unshielded design with through-hole solder termination and board lock functionality. The part is ROHS3 compliant and currently in active production with 752 units available in inventory. Alternative models may be required to accommodate application-specific requirements such as shielding, operating temperature ranges, or packaging constraints.

Substiute Parts

33TS3010NF-88B

Amphenol CONECIn Stock: 80733TS3010NF-88B Datasheet

Current PartRFQ

FRJAE-418

Amphenol ICC (Commercial Products)In Stock: 1254FRJAE-418 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters that must align with the 33TS3010NF-88B:

• Connector Type: Jack (modular RJ45)
• Contact Configuration: 8p8c (RJ45, Ethernet standard)
• Orientation: 90° right angle
• Mounting Type: Through hole, solder termination
• Tab Direction: Down
• Contact Material & Finish: Phosphor bronze with gold finish
• Mechanical Form Factor: Single port, single row

The FRJAE-418 qualifies as a substitute despite incorporating shielding and alternative housing material, as these are permitted design variations within the modular connector category that do not compromise the core electrical interface or mechanical mounting compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 33TS3010NF-88B and FRJAE-418 are active products in compliance with RoHS standards and carry unlimited moisture sensitivity ratings. The 33TS3010NF-88B features ROHS3 compliance and incorporates ferrite suppression. The FRJAE-418 provides shielding and includes a filter feature, with an operating temperature range of -55°C to 85°C and thicker gold contact finish (50.0µin vs 6.00µin). Selection between these connectors should be based on electromagnetic interference requirements, thermal operating conditions, and specific application signal integrity needs.

Frequently Asked Questions (FAQ)

Q: Can FRJAE-418 directly replace 33TS3010NF-88B in existing designs? A: Yes. Both connectors share identical RJ45 8p8c contact configuration, 90° right-angle orientation, through-hole solder mounting, and down tab direction. Pin-to-pin compatibility is maintained across all termination points.

Q: What are the key differences between these connectors? A: The primary differences are shielding (unshielded vs. shielded), housing material (polyester glass-filled vs. thermoplastic), and ferrite versus filter supplementary features. The FRJAE-418 also specifies an operating temperature range and features thicker gold plating on contacts.

Q: When should shielding be considered in connector selection? A: Shielded connectors reduce electromagnetic interference susceptibility. The FRJAE-418 shielded variant is appropriate for noise-sensitive applications or environments with high electromagnetic field exposure. The 33TS3010NF-88B unshielded design is suitable for standard signal integrity requirements.

Q: Are there packaging differences affecting inventory or procurement? A: The 33TS3010NF-88B is supplied in box packaging (752 units in stock), while the FRJAE-418 is supplied in tray packaging (1232 units in stock). Packaging format does not affect connector functionality or mechanical compatibility.

Q: What compliance standards apply to these connectors? A: Both connectors are RoHS compliant with MSL rating 1 (unlimited moisture sensitivity). The 33TS3010NF-88B is ROHS3 compliant. Both carry ECCN EAR99 classification and HTSUS code 8536.69.4040.