Equivalent & Substitute Parts for 336TLS035M

Part Overview

The 336TLS035M is a 33 µF, 35 V aluminum electrolytic capacitor in axial configuration, manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active and suitable for general-purpose applications requiring through-hole mounting. The part is ROHS3 compliant and REACH unaffected, meeting current environmental standards.

Substitute parts are identified when electrical and mechanical parameters align within the allowed specifications for this product category. The primary substitute maintains identical capacitance and tolerance while offering enhanced voltage rating and improved ripple current handling.

Substiute Parts

336TLS035M

Cornell Dubilier / Illinois CapacitorIn Stock: 934336TLS035M Datasheet

Current PartRFQ

336TTA050M

Cornell Dubilier / Illinois CapacitorIn Stock: 7133336TTA050M Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for aluminum electrolytic capacitors is determined by the following criteria:

Mandatory Matching Parameters:

• Capacitance value: 33 µF
• Tolerance: ±20%
• Package / Case: Axial, Can
• Mounting Type: Through Hole
• Physical dimensions: 0.248" Dia x 0.630" L (6.30mm x 16.00mm)
• Polarization: Polar

Allowable Variation Parameters:

• Voltage - Rated: Equal or higher than 35 V
• ESR @ 120 Hz: Equal or lower than 6.0286 Ohm
• Ripple Current: Equal or higher than 105 mA @ 120 Hz
• Operating Temperature Range: Must encompass -40°C to 85°C
• Lifetime @ 85°C: Equal or greater than 2000 Hrs

The substitute part 336TTA050M meets all mandatory matching criteria and provides enhanced electrical performance within allowable variation parameters.

Parameter Comparison

Engineering Selection Recommendations

336TLS035M Selection Criteria:

• Applications requiring exactly 35 V rated voltage
• Space-constrained designs where voltage margin is not required
• Cost-sensitive applications where lower voltage rating is sufficient

336TTA050M Selection Criteria:

• Applications operating at or near 35 V where voltage margin improves reliability
• Circuits with potential transient overvoltage conditions
• Applications requiring higher ripple current handling (115 mA @ 120 Hz vs. 105 mA)
• General-purpose designs benefiting from enhanced electrical performance

Both parts are Active status products with ROHS3 compliance and REACH unaffected designation. Both maintain identical physical dimensions, mounting configuration, and thermal characteristics. The substitute part provides superior electrical performance specifications while maintaining full mechanical and environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can 336TTA050M directly replace 336TLS035M in existing designs?

A: Yes. Both parts share identical capacitance (33 µF), tolerance (±20%), physical dimensions (0.248" Dia x 0.630" L), mounting type (Through Hole), and package configuration (Axial, Can). The substitute operates within the same temperature range (-40°C to 85°C) and maintains identical ESR and lifetime specifications.

Q: What is the primary difference between these parts?

A: The rated voltage differs: 336TLS035M is rated 35 V, while 336TTA050M is rated 50 V. The substitute also provides higher ripple current capacity (115 mA @ 120 Hz vs. 105 mA). Both maintain identical ESR at 6.0286 Ohm @ 120 Hz.

Q: Are there any mechanical compatibility concerns?

A: No. Both parts are identical in physical dimensions and mounting configuration. They are both through-hole axial capacitors with 0.248" diameter and 0.630" length (6.30mm x 16.00mm).

Q: Do both parts meet current environmental standards?

A: Yes. Both 336TLS035M and 336TTA050M are ROHS3 compliant and REACH unaffected, meeting current environmental regulations.

Q: What is the moisture sensitivity level for both parts?

A: Both parts have Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without moisture control requirements.

Q: Can 336TLS035M replace 336TTA050M?

A: No. The main part has a lower voltage rating (35 V vs. 50 V) and lower ripple current capacity (105 mA vs. 115 mA @ 120 Hz). Substitution in the reverse direction is not recommended for applications designed for the higher-rated substitute.