Bourns 3362M-1-502 Trimmer Potentiometer - Equivalent & Substitute Parts

Part Overview

The Bourns 3362M-1-502 is a sealed Trimpot® 3362 series trimmer potentiometer rated at 5 kOhms, 0.5W with PC pin termination and side adjustment. This component is designed for through-hole mounting applications requiring precision resistance adjustment in compact rectangular form factor. The part is currently active in production with 628 units in stock. Finding equivalent substitute parts may be necessary due to inventory availability, lead time requirements, or specific compliance certifications needed for end-application deployment.

Substiute Parts

3362M-1-502

Bourns Inc.In Stock: 7283362M-1-502 Datasheet

Current PartRFQ

3362M-1-502LF

Bourns Inc.In Stock: 11573362M-1-502LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3362M-1-502 is determined by strict equivalence across the following critical parameters:

• Resistance value: 5 kOhms
• Power rating: 0.5W (1/2W)
• Tolerance: ±10%
• Temperature coefficient: ±100ppm/°C
• Number of turns: 1
• Adjustment type: Side Adjustment
• Resistive material: Cermet
• Mounting type: Through Hole
• Termination style: PC Pins
• Physical dimensions: Rectangular - 0.275" x 0.260" Face (6.99mm x 6.60mm)
• Series: Trimpot® 3362 - Sealed

The 3362M-1-502LF qualifies as a direct substitute based on identical electrical and mechanical specifications across all parameters listed above. Variations in RoHS compliance status do not affect functional substitutability.

Parameter Comparison

Engineering Selection Recommendations

Both the 3362M-1-502 and 3362M-1-502LF are active production components from Bourns Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on compliance requirements:

The 3362M-1-502LF carries ROHS3 compliance certification, making it the appropriate choice for applications subject to RoHS Directive 2011/65/EU requirements. The 3362M-1-502 is RoHS non-compliant and should be selected only when RoHS compliance is not a regulatory requirement for the end application.

Both parts are REACH Affected and carry identical export classification (EAR99) and tariff codes (HTSUS 8533.40.8050).

Frequently Asked Questions (FAQ)

Q: Can the 3362M-1-502LF be used as a direct replacement for the 3362M-1-502?

A: Yes. The 3362M-1-502LF is electrically and mechanically identical to the 3362M-1-502. All functional parameters including resistance, power rating, tolerance, temperature coefficient, adjustment type, and physical dimensions are equivalent. The primary difference is RoHS compliance status.

Q: What is the difference between these two part numbers?

A: The "LF" suffix in 3362M-1-502LF indicates ROHS3 compliance. The base electrical and mechanical specifications are identical. Both parts use Cermet resistive material, feature 1-turn side adjustment, and are housed in the same rectangular form factor.

Q: Are there any packaging differences between these parts?

A: Both parts are supplied in tube packaging. No packaging format differences exist between the 3362M-1-502 and 3362M-1-502LF.

Q: Which part should I select for a new design?

A: Selection depends on regulatory requirements. If RoHS compliance is mandatory for your application or market, specify the 3362M-1-502LF. If RoHS compliance is not required, either part is functionally suitable.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts have identical through-hole PC pin termination, matching physical dimensions, and equivalent electrical performance. No PCB layout modifications are required when substituting between these parts.