3362F-1-201LF Trimmer Potentiometer Equivalent & Substitute Parts

Part Overview

The Bourns 3362F-1-201LF is a 200 Ohm, 0.5W through-hole trimmer potentiometer with cermet resistive material, top adjustment, and PC pin termination. This component is part of the Trimpot® 3362 sealed series and maintains active product status. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and regulatory compliance to support procurement flexibility and supply chain continuity.

Substiute Parts

3362F-1-201LF

Bourns Inc.In Stock: 9923362F-1-201LF Datasheet

Current PartRFQ

25PR200LF

TT Electronics/BIIn Stock: 512025PR200LF Datasheet

SimilarRFQ

CT-6EP201

Nidec Components CorporationIn Stock: 11759CT-6EP201 Datasheet

SimilarRFQ

FT-63EP201

Nidec Components CorporationIn Stock: 1419FT-63EP201 Datasheet

SimilarRFQ

FT-63EV201

Nidec Components CorporationIn Stock: 1183FT-63EV201 Datasheet

SimilarRFQ

T73YP201KT20

Vishay SferniceIn Stock: 2061T73YP201KT20 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters: resistance value (200 Ohms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1), adjustment type (top adjustment), resistive material (cermet), mounting type (through hole), and termination style (PC pins). All identified substitute parts match these core electrical and mechanical specifications. Physical dimensions vary within acceptable tolerances for through-hole mounting applications. Packaging format and inventory availability do not affect functional substitutability.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status and comply with ROHS3 or equivalent RoHS standards. The 3362F-1-201LF, CT-6EP201, FT-63EP201, FT-63EV201, and T73YP201KT20 are ROHS3 compliant. The 25PR200LF carries RoHS compliance. Physical dimension variations (ranging from 6.86mm to 7.00mm) are within acceptable tolerances for standard through-hole PCB layouts and do not impact electrical performance or functional compatibility. Selection should prioritize inventory availability and lead time requirements, as all parts are electrically and mechanically equivalent for this application.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the 3362F-1-201LF? A: Substitution requires matching resistance value (200 Ohms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1), adjustment type (top adjustment), resistive material (cermet), mounting type (through hole), and termination style (PC pins). All listed parts meet these criteria.

Q: Are there physical dimension differences between the main part and substitutes? A: Yes. The 3362F-1-201LF has a rectangular face of 6.99mm x 6.60mm. Substitutes range from 6.86mm x 6.86mm (25PR200LF) to 7.00mm x 7.00mm (CT-6EP201, FT-63EP201, FT-63EV201). These variations are within acceptable tolerances for through-hole mounting and do not affect electrical performance.

Q: Do packaging differences affect substitutability? A: No. The 3362F-1-201LF is supplied in tube packaging, while CT-6EP201, FT-63EP201, and FT-63EV201 are supplied in bulk. Packaging format does not impact functional compatibility or electrical characteristics.

Q: Are all substitutes RoHS compliant? A: Yes. The 3362F-1-201LF, CT-6EP201, FT-63EP201, FT-63EV201, and T73YP201KT20 are ROHS3 compliant. The 25PR200LF is RoHS compliant. All parts meet regulatory requirements for restricted substance use.

Q: Can I use these parts interchangeably in my circuit design? A: Yes, provided your PCB layout accommodates the physical dimension variations noted in the parameter comparison table. All parts are electrically equivalent and will perform identically within the specified tolerance and temperature coefficient ranges.