335MABA02KHS Film Capacitor Equivalent & Substitute Parts

Part Overview

The 335MABA02KHS is a 3.3 µF film capacitor manufactured by Cornell Dubilier / Illinois Capacitor, rated for 600V DC operation with polypropylene metallized dielectric construction. This component is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing procurement and design applications. The radial through-hole configuration and motor run application profile define the functional requirements for suitable alternatives.

Substiute Parts

335MABA02KHS

Cornell Dubilier / Illinois CapacitorIn Stock: 862335MABA02KHS Datasheet

Current PartRFQ

B32924B4335K000

EPCOS - TDK ElectronicsIn Stock: 1109B32924B4335K000 Datasheet

SimilarRFQ

MABA024330KHL

NichiconIn Stock: 866MABA024330KHL Datasheet

Parametric EquivalentRFQ

MABA024330KHS

NichiconIn Stock: 1043MABA024330KHS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 335MABA02KHS is determined by strict equivalence across the following critical parameters:

Parametric Equivalents (MABA024330KHL, MABA024330KHS): These Nichicon parts maintain identical electrical specifications including 3.3 µF capacitance, ±10% tolerance, 600V DC rating, 320V AC rating, and polypropylene metallized dielectric. Physical dimensions, lead spacing, and mounting configuration are identical. Both parts are active products with current manufacturing status, providing direct functional replacement capability.

Functional Substitute (B32924B4335K000): The EPCOS TDK Electronics part shares the same 3.3 µF capacitance and ±10% tolerance with elevated voltage ratings (650V DC, 350V AC). Operating temperature extends to 110°C versus 100°C maximum for the main part. Physical dimensions differ slightly in width and height, though lead spacing remains at 1.083" (27.50mm). This part is classified as active and ROHS3 compliant. Application profile differs (EMI/RFI suppression versus motor run), and X2 rating indicates different regulatory classification.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes: MABA024330KHL and MABA024330KHS (Nichicon) are direct parametric equivalents to the 335MABA02KHS. Both parts maintain identical electrical and mechanical specifications with active product status, ensuring long-term availability. Selection between these two Nichicon variants depends on specific packaging and inventory requirements, as electrical performance is equivalent.

Secondary Substitute: B32924B4335K000 (EPCOS - TDK Electronics) provides functional substitution with enhanced voltage ratings and extended operating temperature range. This part is suitable for applications where higher voltage margins or elevated temperature operation are beneficial. The X2 rating and EMI/RFI suppression designation indicate different regulatory and application context compared to the motor run profile of the main part. Physical dimensions differ slightly, requiring PCB layout verification.

All substitute parts maintain ROHS3 compliance and REACH unaffected status, consistent with the original component's regulatory classification.

Frequently Asked Questions (FAQ)

Q: Can MABA024330KHL and MABA024330KHS be used interchangeably with 335MABA02KHS?

A: Yes. Both Nichicon parts are parametric equivalents with identical capacitance (3.3 µF), tolerance (±10%), voltage ratings (600V DC / 320V AC), dielectric material (polypropylene metallized), operating temperature range (-40°C ~ 100°C), and physical dimensions. Lead spacing and termination type are identical at 1.083" (27.50mm) with PC pins. Direct substitution is supported.

Q: What are the key differences between the Nichicon equivalents and the EPCOS B32924B4335K000?

A: The EPCOS part provides higher voltage ratings (650V DC / 350V AC versus 600V DC / 320V AC) and extended operating temperature to 110°C. Physical dimensions differ slightly in width and height. The EPCOS part carries X2 rating and is specified for EMI/RFI suppression applications, whereas the main part and Nichicon equivalents are designated for motor run applications. Capacitance and tolerance remain identical at 3.3 µF ±10%.

Q: Are all substitute parts through-hole radial components with matching lead spacing?

A: Yes. All substitute parts maintain through-hole radial mounting configuration with 1.083" (27.50mm) lead spacing and PC pin termination, ensuring compatibility with existing PCB designs. Physical dimensions vary slightly between the Nichicon equivalents and EPCOS part, with the Nichicon parts providing exact dimensional match to the original component.

Q: What is the product status of available substitutes?

A: MABA024330KHL and MABA024330KHS are both active products with current manufacturing status. B32924B4335K000 is also active. The original 335MABA02KHS is classified as obsolete, making these active alternatives necessary for ongoing procurement.

Q: Do all parts meet current regulatory compliance standards?

A: Yes. All substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory status of the original 335MABA02KHS component.