Equivalent & Substitute Parts for 3296X-1-102A

Part Overview

The Bourns 3296X-1-102A is a 1 kOhm, 0.5W through-hole trimmer potentiometer with PC pin termination, featuring 25-turn side adjustment and cermet resistive material. This component is classified as Active product status with full inventory availability. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when packaging or compliance requirements differ.

Substiute Parts

3296X-1-102A

Bourns Inc.In Stock: 11643296X-1-102A Datasheet

Current PartRFQ

PV36X102C01B00

Bourns Inc.In Stock: 3025PV36X102C01B00 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3296X-1-102A is determined by matching the following critical parameters:

• Resistance value: 1 kOhms
• Power rating: 0.5W (1/2W)
• Tolerance: ±10%
• Temperature coefficient: ±100ppm/°C
• Number of turns: 25
• Adjustment type: Side Adjustment
• Resistive material: Cermet
• Mounting type: Through Hole
• Termination style: PC Pins

The substitute part PV36X102C01B00 meets all electrical and mechanical criteria for direct substitution. Differences in packaging format (Tube versus Tape & Box) and physical dimensions (within tolerance) do not affect functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 3296X-1-102A and PV36X102C01B00 are electrically and mechanically equivalent for circuit applications requiring a 1 kOhm, 0.5W trimmer potentiometer with 25-turn side adjustment.

Selection between these parts should be based on:

• Packaging requirements: The 3296X-1-102A is supplied in Tape & Box format, while PV36X102C01B00 is supplied in Tube format. Choose based on assembly line compatibility and inventory management needs.
• Compliance requirements: The PV36X102C01B00 carries ROHS3 compliance certification, whereas the 3296X-1-102A is RoHS non-compliant. For applications subject to RoHS regulations, the PV36X102C01B00 is the appropriate selection.
• Inventory availability: Both parts maintain active stock status with sufficient quantities for production use.

Frequently Asked Questions (FAQ)

Q: Can PV36X102C01B00 be used as a direct replacement for 3296X-1-102A in existing designs?

A: Yes. Both parts share identical electrical specifications (1 kOhm resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 25-turn adjustment) and mechanical characteristics (through-hole mounting, PC pin termination, side adjustment). Physical dimensions are within acceptable tolerance for PCB footprint compatibility.

Q: What is the difference in packaging between these two parts?

A: The 3296X-1-102A is packaged in Tape & Box (TB) format, suitable for automated pick-and-place assembly. The PV36X102C01B00 is packaged in Tube format, typically used for manual assembly or alternative handling processes. Packaging selection depends on manufacturing workflow requirements.

Q: Does the RoHS compliance difference affect circuit performance?

A: No. RoHS compliance status reflects manufacturing and material sourcing standards, not electrical or functional performance. The ROHS3 compliance of PV36X102C01B00 indicates adherence to restricted substance directives and is relevant for regulatory and supply chain requirements, not circuit operation.

Q: Are the physical dimensions identical between these parts?

A: The parts have similar rectangular form factors with minor dimensional variations. The 3296X-1-102A has a face dimension of 0.395" x 0.190" (10.03mm x 4.83mm), while the PV36X102C01B00 measures 0.394" x 0.197" (10.00mm x 5.00mm). These differences are within standard PCB footprint tolerances and do not affect mounting compatibility.

Q: Which part should be selected for new designs?

A: Selection depends on specific project requirements. For applications requiring RoHS compliance, select PV36X102C01B00. For applications with no compliance constraints, either part is suitable. Verify packaging compatibility with your assembly process before finalizing the selection.