3296W-1-504ALF Equivalent & Substitute Parts

Part Overview

The 3296W-1-504ALF is a 500 kOhms, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. as part of the Trimpot® 3296 sealed series. This component features a cermet resistive element, 25-turn top adjustment, and PC pin termination for printed circuit board mounting. The part maintains active product status and is RoHS3 compliant.

Substitute parts become necessary when the original packaging format (Tape & Box) is unavailable, when alternative series options provide equivalent electrical performance, or when inventory constraints require sourcing from alternative product lines that meet identical electrical and mechanical specifications.

Substiute Parts

3296W-1-504ALF

Bourns Inc.In Stock: 8023296W-1-504ALF Datasheet

Current PartRFQ

PV36W504C01B00

Bourns Inc.In Stock: 4310PV36W504C01B00 Datasheet

SimilarRFQ

PV36Y504C01B00

Bourns Inc.In Stock: 1150PV36Y504C01B00 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3296W-1-504ALF is determined by strict equivalence across the following parameters:

• Resistance value: 500 kOhms
• Power rating: 0.5W (1/2W)
• Tolerance: ±10%
• Temperature coefficient: ±100ppm/°C
• Number of turns: 25
• Adjustment type: Top Adjustment
• Resistive material: Cermet
• Mounting type: Through Hole
• Termination style: PC Pins
• Regulatory compliance: RoHS3 and REACH status

The substitute parts PV36W504C01B00 and PV36Y504C01B00 meet all electrical and mechanical criteria for direct substitution. Both parts are manufactured by Bourns Inc., belong to the PV36 series, and maintain identical electrical specifications and through-hole PC pin configuration. Dimensional variations remain within acceptable tolerances for standard PCB mounting applications.

Parameter Comparison

Engineering Selection Recommendations

Both PV36W504C01B00 and PV36Y504C01B00 are qualified substitutes for the 3296W-1-504ALF based on electrical equivalence and regulatory compliance. All three parts maintain active product status, RoHS3 compliance, and REACH affected designation.

Selection between substitute options should be based on packaging availability and inventory requirements. The PV36W504C01B00 and PV36Y504C01B00 are supplied in tube packaging rather than tape and box format. Dimensional tolerances between the main part and substitute parts are minimal and do not affect standard through-hole PCB mounting compatibility.

Frequently Asked Questions (FAQ)

Q: Can PV36W504C01B00 and PV36Y504C01B00 be used interchangeably with 3296W-1-504ALF?

A: Yes. Both substitute parts meet all electrical specifications, mechanical mounting requirements, and regulatory compliance standards. The primary difference is packaging format and minor dimensional variation within acceptable tolerances.

Q: What is the difference between PV36W504C01B00 and PV36Y504C01B00?

A: Both parts are electrically and mechanically identical. The difference lies in the series designation (PV36W versus PV36Y). Both maintain the same resistance, power rating, tolerance, temperature coefficient, and through-hole PC pin configuration.

Q: Are there dimensional compatibility concerns when substituting?

A: The substitute parts have face dimensions of 0.378" x 0.197" (9.60mm x 5.00mm) compared to the original 0.375" x 0.190" (9.53mm x 4.83mm). These variations are within standard manufacturing tolerances and do not affect through-hole PCB mounting compatibility.

Q: Do the substitute parts maintain the same regulatory compliance?

A: Yes. PV36W504C01B00 and PV36Y504C01B00 are both RoHS3 compliant and REACH affected, matching the compliance status of the 3296W-1-504ALF.

Q: What packaging formats are available for each part?

A: The 3296W-1-504ALF is supplied in Tape & Box (TB) format. Both substitute parts PV36W504C01B00 and PV36Y504C01B00 are supplied in tube packaging.