3296W-1-201ALF Trimmer Potentiometer - Equivalent & Substitute Parts

Part Overview

The 3296W-1-201ALF is a 200 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. as part of the Trimpot® 3296 Sealed series. This component features cermet resistive material, 25-turn top adjustment, and PC pin termination for printed circuit board applications. The part maintains Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility requirements are met within the same product category.

Substiute Parts

3296W-1-201ALF

Bourns Inc.In Stock: 12333296W-1-201ALF Datasheet

Current PartRFQ

PV36W201C01B00

Bourns Inc.In Stock: 4223PV36W201C01B00 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3296W-1-201ALF is determined by strict equivalence across the following critical parameters:

• Resistance value: 200 Ohms
• Power rating: 0.5W (1/2W)
• Tolerance: ±10%
• Temperature coefficient: ±100ppm/°C
• Number of turns: 25
• Adjustment type: Top Adjustment
• Resistive material: Cermet
• Mounting type: Through Hole
• Termination style: PC Pins
• Regulatory compliance: RoHS3 Compliant

The substitute part PV36W201C01B00 meets all electrical and mechanical criteria for direct substitution. Packaging differences (Tape & Box versus Tube) do not affect functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 3296W-1-201ALF and PV36W201C01B00 are Active products from Bourns Inc. with identical electrical specifications and RoHS3 compliance. Selection between these parts should be based on:

• Packaging requirements: 3296W-1-201ALF is supplied in Tape & Box format; PV36W201C01B00 is supplied in Tube format
• Inventory availability: PV36W201C01B00 has higher stock levels (4176 pcs versus 1130 pcs)
• Dimensional tolerance: Face dimensions differ by approximately 0.003" to 0.007" across both axes, remaining within typical PCB layout tolerances for through-hole applications

Both parts satisfy REACH and EAR99 export compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can PV36W201C01B00 be used as a direct replacement for 3296W-1-201ALF?

A: Yes. Both parts share identical electrical specifications (200 Ohms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient, 25-turn cermet construction) and mechanical compatibility (through-hole PC pin termination, top adjustment). Minor dimensional variations (approximately 0.003" to 0.007" difference in face dimensions) do not affect PCB mounting or functional performance.

Q: What is the difference between Tape & Box and Tube packaging?

A: Packaging format affects component handling and storage but not electrical or mechanical function. Tape & Box packaging is suitable for automated assembly processes; Tube packaging is typical for manual assembly or lower-volume applications. Both formats contain identical components.

Q: Are there any compliance differences between these parts?

A: No. Both parts are RoHS3 compliant, REACH affected, and classified under ECCN EAR99 with identical HTSUS codes (8533.40.8050).

Q: What determines substitution eligibility for this trimmer potentiometer?

A: Substitution is valid when resistance value, power rating, tolerance, temperature coefficient, number of turns, adjustment type, resistive material, mounting type, termination style, and regulatory compliance are identical. Packaging format and minor dimensional variations do not affect substitution eligibility.