Phoenix Contact 3232011 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3232011 is a 4-position feed-through terminal block connector rated for 10-24 AWG wire gauges and 630V IEC voltage. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing system maintenance and new designs. The CLIPLINE UDK series provides screw termination with polyamide insulation suitable for industrial control and distribution applications.

Substiute Parts

3232011

Phoenix ContactIn Stock: 7733232011 Datasheet

Current PartRFQ

2775249

Phoenix ContactIn Stock: 11282775249 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 2775249 qualifies as a direct substitute based on the following critical parameters:

• Series Compatibility: Both parts belong to the CLIPLINE UDK series
• Electrical Ratings: Identical 630V IEC voltage rating and 4-position configuration
• Mechanical Interface: Matching 6.2mm terminal width, screw termination, and 8mm stripping length
• Insulation Material: Both use Polyamide (PA) Nylon construction
• Wire Capacity: Both accommodate 0.2-6mm² wire cross-sections
• Color: Identical gray housing

The primary distinction is product status: the 3232011 is obsolete while the 2775249 is active, with improved compliance certifications (ROHS3 vs. RoHS Compliant).

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 2775249 is the designated substitute for the obsolete 3232011 based on functional equivalence within the CLIPLINE UDK series. The 2775249 maintains all critical electrical and mechanical parameters required for direct replacement in 4-position, 630V feed-through applications.

The 2775249 carries ROHS3 compliance, representing current regulatory alignment compared to the legacy RoHS Compliant status of the 3232011. Both parts meet industrial-grade insulation standards, though the 3232011 carries a UL94 V-0 rating while the 2775249 is rated UL94 V-2. This difference reflects material formulation changes in the active product line and does not affect functional compatibility in standard terminal block applications.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 2775249 directly replace the 3232011 in existing installations?

A: Yes. Both parts share identical electrical ratings (630V IEC), mechanical dimensions (6.2mm terminal width, 4 positions), termination method (screw), and wire capacity (0.2-6mm²). The 2775249 is the active equivalent within the same CLIPLINE UDK series.

Q: What is the significance of the different flammability ratings (UL94 V-0 vs. V-2)?

A: The 3232011 carries UL94 V-0 (highest flame resistance), while the 2775249 carries UL94 V-2. Both ratings meet industrial safety standards for terminal block applications. The difference reflects material composition changes in the current product generation.

Q: Why is the 3232011 listed as obsolete?

A: Obsolete status indicates the part is no longer manufactured by Phoenix Contact. The 2775249 represents the active continuation within the CLIPLINE UDK series with equivalent functionality and improved compliance certifications.

Q: Are there packaging differences between these parts?

A: The 3232011 packaging specification is not provided. The 2775249 is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: What wire gauges are compatible with both parts?

A: Both the 3232011 and 2775249 accommodate 0.2-6mm² wire cross-sections, with a standard stripping length of 8mm for both parts.