TE Connectivity 3-2176094-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 3-2176094-7 is a 287 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package format with 0.25W power rating. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility exist across different manufacturers, enabling procurement flexibility and supply chain continuity.

Substiute Parts

3-2176094-7

TE Connectivity Passive ProductIn Stock: 9623-2176094-7 Datasheet

Current PartRFQ

ERA-6AEB2873V

Panasonic Electronic ComponentsIn Stock: 19874ERA-6AEB2873V Datasheet

DirectRFQ

RT0805BRD07287KL

YAGEOIn Stock: 1918RT0805BRD07287KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 3-2176094-7 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 287 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS3 Compliance

Allowable Variation:

• Power rating may be equal to or greater than 0.25W
• Physical dimensions within 0805 package specification
• Moisture Sensitivity Level 1 or equivalent

The identified substitute parts meet all mandatory parameters. Power rating variations reflect different manufacturer designs while maintaining electrical performance within the specified operating conditions.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 3-2176094-7 (Primary Part)

• Recommended for applications requiring 0.25W power dissipation capacity
• Active product status with established supply chain
• RoHS3 compliant with MSL 1 rating
• Suitable for standard industrial and commercial applications

Panasonic ERA-6AEB2873V (Substitute)

• Automotive AEC-Q200 qualified component
• 0.125W power rating suitable for lower power dissipation requirements
• Active product status with high inventory availability (19,822 pcs)
• REACH Unaffected status
• Recommended for automotive-grade applications or where AEC-Q200 qualification is required

YAGEO RT0805BRD07287KL (Substitute)

• Standard industrial-grade thin film resistor
• 0.125W power rating suitable for lower power dissipation requirements
• Active product status with moderate inventory availability (1,830 pcs)
• REACH Unaffected status
• Recommended for cost-optimized applications with lower power requirements

All three parts maintain identical electrical specifications (287 kOhms ±0.1%, ±25ppm/°C, -55°C ~ 155°C operating range) and package compatibility (0805 2012 Metric). Selection between substitute parts depends on application power requirements, automotive qualification needs, and supply chain preferences.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB2873V or YAGEO RT0805BRD07287KL be used as direct replacements for the TE Connectivity 3-2176094-7?

A: Both substitute parts are electrically compatible with identical resistance (287 kOhms), tolerance (±0.1%), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C ~ 155°C). Physical dimensions and package format (0805 2012 Metric) are identical. The primary difference is power rating: substitute parts are rated at 0.125W versus the original 0.25W. Substitution is valid when circuit power dissipation does not exceed 0.125W.

Q: What is the significance of the power rating difference between the main part and substitutes?

A: The TE Connectivity 3-2176094-7 is rated at 0.25W (1/4W), while both substitute parts are rated at 0.125W (1/8W). This difference reflects thermal dissipation capacity. In applications where the resistor dissipates less than 0.125W, either substitute part operates within safe limits. Applications requiring power dissipation between 0.125W and 0.25W require the original TE Connectivity part.

Q: Are there any compliance or certification differences between these parts?

A: The Panasonic ERA-6AEB2873V carries AEC-Q200 automotive qualification, making it suitable for automotive applications. The TE Connectivity 3-2176094-7 and YAGEO RT0805BRD07287KL do not list automotive qualification. All three parts are RoHS3 compliant with MSL 1 rating. The Panasonic and YAGEO parts have REACH Unaffected status, while the TE Connectivity part lists REACH status as Vendor Undefined.

Q: Do the substitute parts fit the same PCB footprint?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Height differences are minimal (0.026" maximum for TE Connectivity versus 0.024" maximum for substitutes), well within standard PCB assembly tolerances and reflow profile specifications.

Q: What inventory considerations should guide part selection?

A: The Panasonic ERA-6AEB2873V has the highest inventory availability at 19,822 pieces. The YAGEO RT0805BRD07287KL has 1,830 pieces available. The TE Connectivity 3-2176094-7 has 906 pieces in stock. Inventory levels may influence procurement decisions for high-volume production or long-term supply chain planning.

Q: Can the substitute parts be used in high-temperature applications?

A: All three parts share identical operating temperature range specifications (-55°C ~ 155°C) and temperature coefficient (±25ppm/°C). Thermal performance is equivalent across the full operating range. Part selection for high-temperature applications should be based on power dissipation requirements rather than temperature rating differences.