TE Connectivity 3-2176093-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 3-2176093-8 is a 23.2 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.25W (1/4W) power dissipation. This component is manufactured by TE Connectivity Passive Product under the RP73P series and is classified as Active product status. The part is packaged in Tape & Reel (TR) format and is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design specifications allow for alternative manufacturers meeting identical electrical and mechanical parameters. Substitute parts listed herein maintain compatibility with the original design through matching resistance value, tolerance, package configuration, and operating temperature range.

Substiute Parts

3-2176093-8

TE Connectivity Passive ProductIn Stock: 12323-2176093-8 Datasheet

Current PartRFQ

ERA-6AEB2322V

Panasonic Electronic ComponentsIn Stock: 830ERA-6AEB2322V Datasheet

DirectRFQ

RG2012P-2322-B-T5

SusumuIn Stock: 5644RG2012P-2322-B-T5 Datasheet

DirectRFQ

RT0805BRD0723K2L

YAGEOIn Stock: 3310RT0805BRD0723K2L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the TE Connectivity 3-2176093-8 is based on the following critical parameters that must remain constant across all equivalent parts:

Mandatory Matching Parameters:

• Resistance value: 23.2 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C to 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Status: ROHS3 Compliant

Allowable Variation:

• Power rating may be equal to or greater than the original 0.25W specification. Substitute parts rated at 0.125W (1/8W) are acceptable in applications where the circuit design does not require the full 0.25W dissipation capacity, as the lower power rating represents a conservative design margin.

All substitute parts listed maintain identical electrical characteristics (resistance, tolerance, temperature coefficient) and physical package dimensions, ensuring direct mechanical and electrical compatibility with the original design.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are Active status components, ensuring continued availability and manufacturing support. Selection among equivalent parts should be based on the following criteria:

ERA-6AEB2322V (Panasonic Electronic Components): This substitute carries AEC-Q200 automotive qualification, indicating compliance with automotive industry reliability standards. The part is suitable for applications requiring automotive-grade components. REACH status is documented as Unaffected, providing regulatory clarity for international applications.

RG2012P-2322-B-T5 (Susumu): This substitute includes both AEC-Q200 automotive qualification and Anti-Sulfur feature specification. The Anti-Sulfur characteristic provides enhanced resistance to sulfur-containing environmental contaminants. This part offers the lowest seated height at 0.020" (0.50mm), which may be advantageous in space-constrained PCB layouts. REACH status is documented as Unaffected.

RT0805BRD0723K2L (YAGEO): This substitute provides a standard thin film 0805 resistor without automotive qualification. It is suitable for general industrial and consumer applications. REACH status is documented as Unaffected, providing regulatory clarity for international applications.

All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard PCB assembly processes and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB2322V be used as a direct replacement for 3-2176093-8?

A: Yes. Both parts share identical resistance (23.2 kOhms), tolerance (±0.1%), package (0805), composition (thin film), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C to 155°C). The ERA-6AEB2322V is rated at 0.125W (1/8W) compared to the original 0.25W (1/4W), which is acceptable when circuit power dissipation does not exceed the lower rating.

Q: What is the difference between RG2012P-2322-B-T5 and the other substitutes?

A: RG2012P-2322-B-T5 includes Anti-Sulfur feature specification and has the lowest seated height at 0.020" (0.50mm) compared to 0.024" (0.60mm) for ERA-6AEB2322V and RT0805BRD0723K2L, and 0.026" (0.65mm) for the original 3-2176093-8. The Anti-Sulfur feature provides enhanced environmental protection in corrosive atmospheres.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All substitute parts listed are supplied in Tape & Reel (TR) packaging format, matching the original component packaging specification.

Q: Do the substitute parts require different PCB assembly processes?

A: No. All substitute parts maintain identical 0805 (2012 Metric) package dimensions and two-terminal configuration, requiring no changes to PCB design, footprint, or standard SMD assembly processes.

Q: Which substitute part is recommended for automotive applications?

A: Both ERA-6AEB2322V and RG2012P-2322-B-T5 carry AEC-Q200 automotive qualification. RG2012P-2322-B-T5 additionally includes Anti-Sulfur feature specification for enhanced environmental protection.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including the original 3-2176093-8 and all substitutes, are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and compatibility with standard storage and assembly conditions.

Q: Are all parts ROHS3 compliant?

A: Yes. The original part 3-2176093-8 and all substitute parts (ERA-6AEB2322V, RG2012P-2322-B-T5, RT0805BRD0723K2L) are ROHS3 compliant.

Q: What is the temperature coefficient specification for all parts?

A: All parts maintain a temperature coefficient of ±25ppm/°C, ensuring identical thermal stability characteristics across the operating temperature range of -55°C to 155°C.